Question about Hotpoint 23 in. BFI62 Built-in Dishwasher

1 Answer

The program light goes off and the BF162 doesn't start...

Hi, we've been given a BF162 but don't have a manual. We tested it once and it worked fine, but now when we try and work it it won't start.
If the door is open the saucepan with one line under it program is lit, if you push the "P" button there is a long beep for as long as you keep the button depressed, but the dishwasher doesn't cycle through the programs, it stays on the same one. If you close the door, the light goes out but the dishwasher doesn't start. We tried unplugging it, and looking under the black plastic covers under the front door but it was dry.
Thanks in advance for any ideas?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

When you keep the button pressed for a few seconds the lights go off, this resets the dishwasher. Then press the p button again to the program you want 1st light is heavy soil 2nd light is normal soil, 3rd light is eco wash, 4th light is rinse. At the end of the cycle the program light you have selected will flash.

Posted on May 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

OBD2 CODE READER P0562


Make sure your 12V grounds to engine and chassis are good.

Apr 11, 2017 | Mazda RX8 Cars & Trucks

1 Answer

RM-VL900 System Control won't program anymore.


Hello drumrunner,

Maybe THIS link may provide some assistance..

Cheers!
IrishDruid

May 11, 2008 | Sony RM-VL900 Remote Control

1 Answer

My 1999 vw beetle won't start in snow


Old new beetle VW harness has contact resistance problems(vibration of wires) and needs to be recrimped the long wires(vibration can be stopped by silicone rubber anchoring). Cold weather make battery voltages low and needs recharged with handbrake on(headlamps off) 10 minutes warming engine up the whole winter.

Mar 08, 2013 | 1999 Volkswagen Beetle

1 Answer

New memory, the board just beeps


First of all that board supports DDR400 (PC3200) so why did you get PC2100 chips?

Anyway, do a bare minimum test (only MB, CPU, RAM & PSU connected, nothing else). Remove all the RAM and test each one individually. Properly insert one into the first RAM slot and test by booting until the POST RAM test is finished. Shutdown and repeat the test with the same RAM module in slot 2 and keep repeating this for every slot. If successful in every slot, mark that module as working then try the other RAM modules using the same procedure.

  • As soon as you find one that doesn't fully pass the POST test, mark it as faulty.
  • If some pass in one slot but not another, then mark it as faulty.
  • If they all fail to pass on a specific slot, mark that slot as faulty and don't use it (you can use electrical tape to cover the slot for future reference).

Once you've finished the bare minimum test, try 2 RAM modules this time (use only the modules that you found to be working from the above tests). Mix and match the RAM modules & then try 3 together and even 4 (if you found all of them to be working fine).

Finally once you're satisfied you've found the modules that work properly, boot with memtest and test the RAM for any problems. If they all seem to work fine individually, boot them individually and test with memtest to determine which ones are actually faulty.

Jul 13, 2012 | HP Compaq Presario SR1610NX (ED865AA) PC...

1 Answer

Cannot update Windows XP Pro


realizing that win xp is no longer supported by microsoft the problem may be that there is now no connection to allow up dates to win xp
if you have service pack3 for xp that is the last update
ring microsoft and find out what is going on

Mar 11, 2017 | Office Equipment & Supplies

1 Answer

Playing MLB the Show on PS3. Game loads fine, franchise I've been playing loads fine. But once I try to play a game, bar starts as game loads then game cuts off and goes to main PS3 screen.


Is your CD dirty or does it have any cracks? It might just be the problem. Otherwise, it could be corrupt game data. Clean the disc, if it still doesn't work I'd try deleting the game utility data and re-downloading it. Hope this helps in some way or another.

Apr 19, 2012 | Sony Playstation 3 (PS3) Console

1 Answer

Philips hf3461 - radio works but sounds don't


Please reset the player and see if this will start back. Also connect to PC and scan the PC for error files, delete and format the memory and load the safe files.

Jan 09, 2012 | Audio Players & Recorders

2 Answers

I have a 2000 chevy silverado 1500. 3 nights ago, my truck started up just fine with no problems and has never had a problem starting up. The next morning, I tried to start it and the dash lights and radio...


do you have remote start on that truck? if you do, it has a hood safety switch that will keep it from starting if hood is open. That hood switch is quite easily identifyable. Look for it on the drivers side, either close to the firewall or right at the front of the fuse box.itsa worth taking a look

Aug 12, 2011 | Chevrolet Silverado 1500 Cars & Trucks

1 Answer

Hi, I've a 1996 Triumph Trophy with a dodgy neutral light on the dash. Works fine on start up, but about 25-30 mins into a ride the light fails and won't come back on until the bike has been...


Hi, Mountainmad and the usual suspects are:
1. Neutral light bulb burnt out.
2. Faulty neutral switch.
3. A loose bulb in the socket.
4. Faulty wiring from the neutral switch to the light.
5. Grounded neutral light circuit.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
neutral light kill switch
Neutral indicator switch
Triumph Trophy Service Manual
http://www.triumphestore.com/
Triumph Trophy Handbook

Jun 22, 2017 | 1996 Triumph Trophy 900

1 Answer

Answering machine doesnot work phone doesnot light up


I've had my GE 29879GE1-A corded phone for quite a long time, however, I never programed my answering machine cause I never received an instruction manual. It was given to me. I would like to know how to set it up and if it even works? The phone works fine. I need instructions for this product. Do You have a instructions manual or a manual for this product?

Aug 04, 2010 | GE 29879GE1 Corded Phone

Not finding what you are looking for?
Hotpoint 23 in. BFI62 Built-in Dishwasher Logo

305 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Dishwashers Experts

AcmeUK

Level 1 Expert

25 Answers

yadayada
yadayada

Level 3 Expert

75744 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Hotpoint Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...