Question about GE Coffee Makers & Espresso Machines
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: GE 169164 coffee maker problem
*** HOW TO RESET THE GE 169164 COFFEE MAKER ***
After endless online searches yielding the same results (nothing useful), I figured out how to reset this coffee maker.
While coffee maker is plugged in and the evil little blue light is mocking you relentlessly, press and hold the 1-4 button and the TSB button simultaneously for 3 seconds or so. This will cause the device to exit it's error status and allow normal use of it.
Posted on Dec 28, 2008
You can find the instructions in this pdf file the link is http://www.gehousewares.com/products/200836153329360.pdf
Posted on Mar 09, 2009
This information is for the GE model number 169164 12 cup digital coffee maker.
The Micro fuse is shorted open. There are two underneath the housing. They are made by MICROTEMP® and are the G400 series rated at 216 Degrees Centigrade.
You can check these with a Ohm meter to see if you have continuity. Checking across the leads of each one they should show infinity. If not you've identified the bad one. You can pick up a new thermal fuse at Radio Shack. The closest one to the specs of the Microtemp is a Radio Shack part number 270-1321 rated at 228 Degrees Centigrade. Before removing the old one notice which way the hat end faces.
Use a heat sink when soldering the new thermal fuse in place by using alligator clips or a pair of pliers.Reassemble and your back in business as a Barista.
Note: There are four Phillips head screws under the rubber pads. The three unusual screw heads may be removed/installed with a small screwdriver installed in just one of the slots.
Posted on Apr 22, 2009
Tips for a great answer:
Jan 08, 2014 | GE 106591 Coffee Maker
Dec 29, 2010 | Bunn GRX-B
Aug 09, 2010 | Hamilton Beach GE 42-Cup Coffee Urn Coffee...
Mar 30, 2010 | Hamilton Beach GE 42-Cup Coffee Urn Coffee...
Dec 21, 2009 | Hamilton Beach GE 42-Cup Coffee Urn Coffee...
Nov 01, 2009 | GE 106591 Coffee Maker
Feb 04, 2009 | Kitchen Selectives CM-202 Coffee Maker
Dec 16, 2008 | Electrolux Cucina Pro 1711 10-Cup Coffee...
Nov 18, 2012 | GE Coffee Makers & Espresso Machines
47 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: