Question about Konica Minolta Office Equipment & Supplies
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If one of the cartridges needs to be changed, the printer will recognize this and it will automatically rotate that cartridge to the front of the printer.
Open the panel and follow the instructions that are shown on a sticker on the inside of the access panel. Removing the cartridges is not difficult. They do have a slight groove near the top that acts as a handle. You may have to rotate the cartridge up as you lift it in order to get it to come out. DO NOT FORCE IT. Once again, please consult the sticker on the inside of the access panel for details on cartridge replacement.
If you need to replace more than one cartridge, press the rotate button to rotate the cartridges to the one that needs replacing and repeat the process.
DO NOT FORGET TO TAKE THE SEALING STRIP OUT OF THE NEW TONER CARTRIDGE BEFORE PUTTING IT IN AS THIS TAB CAN AND MOST LIKELY WILL DAMAGE THE PRINTER. (I've seen it happen.)
After you have replaced the toner cartridges properly, the printer should rotate the drum a few times to prime the cartridges. This is normal. You should see a readout on the LCD screen of the toner levels. (You may have to press a few buttons to see the status on them.)
If you need toner cartridges, head to your nearest office supply store such as Staples or Office Depot for replacements. (Staples will price match other stores if you give them proof of the other store's price.) When I last worked with this machine, the cartridges were still kind of expensive...but worth it for the quality that this machine gives you.
Good luck. :)
Posted on Nov 09, 2007
Possibly the paper grip rollers (inside at bottom rear) are waxed and not gripping. Take a small drop of Isopropyl alcohol and wipe the surfaces clean, this usually works.
Posted on Dec 11, 2009
When there aren't new drivers the best thing I've found is a free download of VMware for virtual machine. It allows you to run windows vista or XP in a seperate window just like a program. Once you are in virtual XP or Vista you can use those drivers for your printers.
Posted on Dec 23, 2009
Tips for a great answer:
Feb 07, 2014 | Konica Minolta magicolor 2500W Laser...
Dec 12, 2013 | Konica Minolta magicolor 2500W Laser...
Mar 09, 2011 | Konica Minolta magicolor 2500W
Mar 12, 2010 | Konica Minolta magicolor 2500W Laser...
Oct 06, 2009 | Konica Minolta magicolor 2500W Laser...
Jul 21, 2009 | Konica Minolta magicolor 2500W Laser...
Jun 15, 2009 | Konica Minolta magicolor 2500W Laser...
Jun 06, 2009 | Konica Minolta magicolor 2500W Laser...
May 10, 2008 | Konica Minolta magicolor 2500W Laser...
37 people viewed this question
Usually answered in minutes!