Question about Dishwashers

2 Answers

Dishwasher problem When dishwasher is switched on it fuses all the sockets in the kitchen. This never used to happen

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 209 Answers

This happens because there is a shot circuit somewhere, now where to start plug in without switching on at the switch, if it trips then there is a mains filter thats shorting out, this is a small part just inside the case where the mains wire enters the cabinet / very common fault and very cheap to fix. otherwise check all individual parts one at a time, start with heater element, then pump, the motor, unplug to test, if it doesn't trip while unplugged the you have the right thing, replace part as needed need more detail really????? hope this helps as a start

Posted on Sep 26, 2007

Ad

Older Bosch dishwashers have a flat cable run from hinged door to machine body.This can become worn through the insulation by rubbing against internals when door is opened & shut causing an electrical short.

Posted on Oct 13, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What do I do now


If the dishwasher is not available, you can carry out the following checks:

Step 1: Check to make sure the power supply. If it has a plug in the wall outlet, then check the wires, plugs and sockets, to ensure that they work properly. Also check the control socket of the switch, make sure it is closed. The vast majority of embedded dishwasher are directly connected with the line. Check the main control panel on the fuse is blown, the circuit breaker is disconnected, then recovery circuit. If your home is old-fashioned dishwasher, it may be associated with the sub-control panel is connected. Check the fuse or breaker panel, and then restore the circuit.

Step 2: If the line has been energized and the wall outlet is controlled by a switch, the switch is likely bad. Use a voltage tester switch. Remove the switch cover, a probe is placed at one end of the tester, another probe placed in the other end. If the detected light switch is good; If you do not, it is bad, you need to replace a switch of the same model new.

Step 3: Make sure that the the Xian bowl machine's door shut furrowed good. Only when the latch snap, the dishwasher before running. Check latch should shut door and lock, firmly hold down the latch, then the control knob to the "start". If the dishwasher can work, said latch is broken and needs to be cleaned, reinforcement or replacement.

Step 4: Make sure that the water supply, and the water temperature is high enough. The failure of the water heater will prevent the dishwasher water. Check the kitchen sink with hot water or bathroom. If we can release hot water, the water heater should be no problem.

Step 5: Make sure that the control panel controls are set correctly. Button controls the more new more sensitive. Make sure that these keys are firmly safety in the corresponding position.

Dec 17, 2012 | Dishwashers

1 Answer

My dishwasher is fusing the sockets. I switch it back on and the dishwasher works for 20 mins but then it happens again


Well what is happening is that as the cycle goes through, when most likely the motor, or the Motor drive electronics, is switched into service it draws too much current because it is faulty, and blows the breaker.
you will need to troubleshoot this issue and see where the problem is.
www.tlc-direct.co.uk/Technical/.../Baumatic_Manuals/BMBDW13.pdf

Above is your manual to help you troubleshoot. of course the other option is to contact a reputable service center and ask for a "Quote" for repair.

Jul 21, 2010 | Baumatic 23 in. BDW13 Built-in Dishwasher

1 Answer

Blowing the fuse


I just had this happen to me too... any ideas?

May 29, 2010 | FrancisFrancis! X5 Espresso Machine

2 Answers

Hotpoint Dishwasher BF1620 blew the main fuse circuit in fuse box during mid cycle wash? Re-set main power fuse circuit but now as soon as Dishwasher switched on immediately blows main kitchen power fuse...


This is happening because you have a very bad fault, a Phase to Earth short, problem. Leave machine UNPLUGGED, Breaker/Fuses OUT. do NOT use it, nor Touch it, It is possible to get severe electric shock. PLEASE get a registered serviceman to inspect this unit.

Feb 07, 2010 | Hotpoint 23 in. BFI62 Built-in Dishwasher

1 Answer

Tried to run dishwasher but it wouldn't turn on -


If you have no power and no lights at all,you may have blown the fuse. There is a non-resettable fuse in the top right corner of the control board.Remove the 6 screws across the top of the console panel to access the board and fuse.
You can check the fuse for continuity with a meter set for ohms or continuity. Al;so check the door switch below the open/close lever for continuity.Check incoming power under the dishwasher were the incoming power wires connect.

Dec 26, 2009 | KitchenAid Dishwashers

1 Answer

CAN I CONNECT A CREDA 2000W PLINTH HEATER USEING A FUSED PLUG?CREDA 2000W PLINTH FAN HEATER


Yes ,you can and fuse at 13amp.
Although the correct way would be to terminate the plinth heater in a switched fused spur or an unswitched fused spur fused at 13 amp
This can either replace a single or double socket or it can be taken of the socket by using 2.5mm2 twin and earth cable.
All parts availiable from hardware store or electrical retailer

Oct 06, 2009 | Creda C362E Electric Kitchen Range

2 Answers

My dishwasher doesn't turn on, nothing happens when I push on the start button, it doesn't light up, was working the day before


HI, there are four problem spots that i recommend checking. these are the most common hot spots for a non responsive dishwasher. Check each area thoroughly to address this issue.

1. No power to the dishwasher Make sure there's power getting to the dishwasher. Check for a tripped circuit breaker or a blown fuse. Check the wall socket for power. Sometimes the power cord disconnects at the dishwasher (inside the junction box, behind the bottom kick panel), if this is the case, the wiring must be repaired or replaced.
2. Door switch Replace if defective.
3. Timer/control board Replace if defective (note: uncommon problem).
4. Selector switch Replace if defective (note: uncommon problem).

Sep 21, 2009 | Dishwashers

1 Answer

Dishwasher won't start


1. No power to the dishwasherMake sure there's power getting to the dishwasher. Check for a tripped circuit breaker or a blown fuse. Check the wall socket for power. Sometimes the power cord disconnects at the dishwasher (inside the junction box, behind the bottom kick panel), if this is the case, the wiring must be repaired or replaced.

2. Door switch
Replace if defective.

3. Timer
Replace if defective (note: uncommon problem).

4. Selector switch
Replace if defective (note: uncommon problem).

Nov 01, 2008 | Maytag MDB7100AWB Dishwasher

3 Answers

Fuse for dishwasher (bosch)


13a fuse is correct. have you wired the plug correctly and is the fuse you are using a good one? try substituting a known good fuse ie from your electric kettle or whatever

Oct 18, 2008 | Bosch 24 in. SGS43C12 Classixx...

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

359 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Marvin
Marvin

Level 3 Expert

81285 Answers

Brad Brown

Level 3 Expert

17431 Answers

Are you a Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...