Question about Brother MFC 7420 All-In-One Laser Printer

1 Answer

I don't know what to say :)

Hi i have a very strange problem with Canon MPF 600!After i instaled on my pc in the firs moment it works but after 10 min or restart of the PC the printer monitor says no comunication whith divice!I try 2 and more diferent cabels witch works with other printers on the same pC i also try other pc at the same way - 2 cabels 2-3 diferent printers everything works , but the canon dosen't!Helps pls ! :) gratz

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 52 Answers

It sounds like you haven't selected this new printer as your default printer? I would first try going to printer troubleshooting screen on your PC by clicking the "START bar" then select "Control Panel" next select the printer icon and then select the "Troubleshooting Printer" and select print test page. If that doen't solve the problem for you, I would then go to the internet and type in then enter the model of printer you have. If you find any of these suggestions helpful, please rate my solution. Thanks D. Lange

Posted on Apr 24, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Hi my dryer goes fir a while then stops . i press start again goes for maybe 5 to 10 mins then stops again. thank you

Perhaps the over-temperature thermostat is tripping. Check for lint clogs at the dryer outlet to the vent pipe/hose.

Jun 06, 2011 | Dryers

1 Answer

Hi, My lcd screen keeps going away after 5 mins of

The fact that it comes back after a tap would say to me there is a dry joint or loose connector.

Apr 16, 2010 | Pioneer DJM-600 Silver Professional DJ...

1 Answer

My printer (canon Pixma PM 600) is not printing. I don't know the problem . Can you help me?

Hi, Either you have not installed the software on your computer or there is some fault with your ink cartridge. Also please connect the pc and the printer carefully as mentioned in your manual.

Feb 13, 2010 | Canon PIXMA MP600 all-In-One InkJet...

1 Answer

Printing #10 envelopes with 5100cn, using MPF. Set paper size to #10 envelope, output same, MPF set for envelopes. Printer display says load #10 envelopes, which are loaded. What do I do now?

You can download the manual for your printer here. You merely need to go to the word processor or program you're printing from and load the addresses and send them to the printer. Try just one as a test to make sure your margins and spacing are set up correctly.
For Dell specs on print media guidelines for your machine, see here. For a blurb about en velope loading, see here. All options here.
I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!

Aug 10, 2009 | Office Equipment & Supplies

1 Answer

H.E.L.P!!!!!!!!!!!! PUHLEZE!!!!!

I had the same problem with mine. All you have to do is search these keywords: Virgin, MPF-1000, Driver, Download

When you search those keywords you should have quite a few options to download the drivers needed. Anyway, here are a few links to the software and/or drivers needed for you to be able to get your Virgin Pulse MPF-1000 working. (This download website is in Spanish for those of you that can only read/speak in Spanish)

That will be all you need to do. Once you have installed the driver, plug the MP3 into the USB. Once you plug it in the autoplay should come up and just go from there. Please let me know if this solves your problem.

Thank You & God Bless,

Sep 13, 2008 | Virgin Pulse VP-MPF-1000 (256 MB) MP3...

1 Answer

Canon MP210

Firs uninstall the driver and rebot ur pc!
Then download this program and clear ur registry:

And when u install it change the directory ( do not install in program files ) make another follder and install there!

Let me know if u got help and rate this solution as FIXYA please if ur problem is fixed

Nov 15, 2007 | Office Equipment & Supplies

5 Answers

Envelope printing

Got a 3100CN and had the same problem but found that a) Changing paper size from the web doesn't work but b) Go to the printer control panel on the printer and use the menu to set the paper size for the MPF tray for FREE. Now your application under windows will overide the whatever the printer thinks and will print. Envelope via Word all work without problem. Suggestion . Configure two printers one B&W using tray one and one colour using MPF and you can now quickly select whether to use colour or b&w. Regards John N - N2UYI/G7LTQ

May 01, 2007 | Dell 3100cn Laser Printer

Not finding what you are looking for?
Brother MFC 7420 All-In-One Laser Printer Logo

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

James Cagle
James Cagle

Level 2 Expert

478 Answers


Level 3 Expert

379 Answers


Level 3 Expert

825 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides