ON jA1 I was able to get the hdd yellow led and the blue power led operational, but I can't seem to get the power switch operational where it will turn on or turn off the computer. { with the computer on I have to literally unplug from the back}. I know the right area because pin 9 is vacant and pin 10 is reserved for future use.
Hi, sounds like the case switch is stuck, leave the cable from the switch off and try to bridge the pins out, the after the computer is running try shut down by bridging the pins again, if this works clean or replace the switch. Regards mistyman
I have an asus dsbf-d server motherboard installed with two Intel Xeon E5410 Harpertown 2.33GHz...
(More)
I have an asus dsbf-d server motherboard installed with two Intel Xeon E5410 Harpertown 2.33GHz processors and 16G ram. I have four 1 TB WD hard drives I want to set in raid 10. I want to install xp 64 bit as os, but cannot find raid driver that xp 64 bit likes.
I have K8NGM-V motherboard with AMD Sempron processor, all leds on my CPU lights up but nothing...
(More)
I have K8NGM-V motherboard with AMD Sempron processor, all leds on my CPU lights up but nothing comes out of my monitor and the led of hdd is not blinking. Pls. help.