Question about Sewing Machines
I advise tha you have it done by a repairer as it must be done with great precision. You can damage the loopers if it is not set correctly.
Posted on Oct 19, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: My serger
Self threading is perhaps not exactly correct, however there is a guide with an armature to release the guide to enable easy access........have a look in you manual
Also take a look at this image and move the lever to use it.....all will be easier to see with the needle plate off ....until you become familiar with the operation
Posted on Feb 17, 2008
Check there is no thread caught in the tension units and set them ALL to 3 for the Factory setting......try a sample.....if it looks good, OK, if not, try to balance it by gently altering the knobs on the right (loopers) until they form an even tension in balance with each side of the fabric.
Posted on May 31, 2009
SOURCE: I need a manual for
The manual is located on the manufacturer's website, here. Click "Specifications" then "Download Manual. It is a PDF.
Posted on Mar 13, 2011
Tips for a great answer:
Feb 05, 2017 | Sewing Machines
Nov 15, 2015 | Janome MyLock 644D
Jan 23, 2013 | Sewing Machines
Mar 13, 2011 | Janome MyLock 634D Mechanical Sewing...
Mar 03, 2011 | Sewing Machines
Feb 11, 2010 | Janome MyLock 634D Mechanical Sewing...
May 24, 2009 | Janome MyLock 644D
28 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: