Question about GE Profile WPRE6100G Top Load Washer

1 Answer

GE Profile washer will not drain. (DOES SPIN)

I have a GE Profile washing machine. Top loader. Probably 8-10 yrs old. Today I washed 2 throw rugs that I have washed many times before. At the end of cycle machine was full of water. Water was chock full of debris from the throw rugs and they had disintegrated. I emptied all water by hand and cleaned out an entire plastic grocery bag full of debris and wiped down tub. Tried running a small load, washer filled, would spin and cycle advances, but water will not drain.
I have a feeling something is clogged because of all the debris, but what and how do I fix? Would this debris have ruined the pump?

Thank you for your help!

Posted by on

  • drinktheberr Apr 26, 2009

    Thank you. I will try this tomorrow and post how it goes!

  • drinktheberr Apr 27, 2009

    Thank you for your reply. I did as you suggested and the black hose to the pump was chock full of debris. I think I need to take out the pump itself and clean it. On the top of the pump is a white plastic tube and it feels like gooey oatmeal inside.

    Could you tell me how to take out pump literally. Where are the screws and how do I remove the clips that go in the front of the pump with the electrical wires. They look like they will pull out but they don't.

    Thank you.



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 113 Answers

Take the front off the washer take the two hoses off the pump youll probably find where its stopped up

Posted on Apr 24, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Washing machine, model #WA45M7050AW/A4, wash throw rugs. There is no information in the manual which came with the machine. Is there any information one might find useful when washing a rug?

like a bedspread throw rug, rather than a rug for the floor?

Same as the material it is made from, normally cotton. Cold wash, minimum agitation, medium spin. You may need to re-balance the load after washing as it is a top loader.

WA7050 4 5 cu ft Top Load Washer Washers WA45M7050AW A4 Samsung US

Mar 18, 2018 | The Computers & Internet

1 Answer

How to remove ge profile top loader washing machine motor

how old is this washer i have worked on the older ones if you can send me a pic i can advise you mate

Feb 11, 2015 | GE Washing Machines

1 Answer

GE Profile Washing Machine wont fill with water top loader

disconnect water lines from washer and check to see if sedement from water plugged up little screen filters

Jun 11, 2009 | GE Profile WPRE6100G Top Load Washer

1 Answer

GE Top Loader Model WASE422OAOWW Profile Prodigy

you have a motor issue, do not run the machine. ther is a risk of fire.

May 26, 2009 | GE Profile Prodigy WPSE4200A

2 Answers

Ge top loader washer agitator does not work

To check the agitator. Start the washer into wash cycle. Once started Push down on top of agitator. If it catches some times or all of the time when pushing down, then then doggets are worn, under the agitator. You`ll have to remove the agitator to see these. If by pushing down on the agitator, nothing changes, Then you probably have a transmition problem. Check this and let me know what you find.

Nov 27, 2008 | Kenmore 22422 Top Load Washer

1 Answer

I have a new washer. Less than 2 months old. I always use the regular cycle but today I needed to wash a very small rug. I used the quick wash and iti took forever. Then at the end( after the cyle) the rug...

I just need help. I do not want to pay anything to have this question answered. I paid $1,200 for these two new appliances less than 45 days ago! I thought this site was connected with GE. Apparently not.

May 26, 2008 | GE Washing Machines

1 Answer

GE Profile Prodigy filled with water & won't start

If you don't hear a click when you close the lid, replace the lid switch.

Jan 29, 2008 | GE Profile Prodigy WPSE4200A

Not finding what you are looking for?
GE Profile WPRE6100G Top Load Washer Logo

782 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Tim Whalen

Level 3 Expert

3074 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a GE Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides