Question about Bushnell Photography

Open Question

Installed new battery. All displays show up in the view finder pressing the button does not shut them off. Almost is like the ranger finder is froze.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Gryfox
  • 216 Answers

SOURCE: reddish vertical lines on LCD & view finder

There is a CCD service advisory for the F717. They will repair it free of charge. Go here for more details: http://www.imaging-resource.com/badccds.html

Posted on Sep 22, 2006

  • 3 Answers

SOURCE: Bushnell Range Finder

I have the same problem, and sent my unit to Bushnell for repair. They were unable to repair it, stated "obsolete" and "repair parts unavailable" and sent it back to me. Would you be interested in selling me your dead unit for parts for a few bucks? Thanks. genebaker@yahoo.com

Posted on Jul 04, 2007

  • 1 Answer

SOURCE: Bushnell Error codes

5/26/09 I spoke with Bushnell technical support today and they informed me that this error "Er6" means the unit can not repaired. They said this is one of their oldest models and that they don't even have parts for it anymore. They did offer to have me send the old unit into their Returns department in Kansas, and in return for sending them the old/broken unit, they will send me an offer to buy one of their new units at a highly discounted rate. Not a bad trade I guess.

Posted on May 27, 2009

pabloloco
  • 2335 Answers

SOURCE: View finder displays "busy" and the shutter is half open

b10909f.gif

2364a9a.jpg

I can help you fix the BUSY Error or Error 99 of your Canon EOS Digital Rebel XS.

Installation of this Canon EOS Digital Rebel XS firmware version 1.06 update will solve these problems:

  1. Some cameras may exhibit a phenomenon in which the LCD monitor does not display, the shutter does not release, and the BUSY indication remains lit in the viewfinder.
  2. The message, "Err 99 Shooting is not possible. Turn the power switch to<OFF> and <ON> again or re-install the battery", appears on the camera's LCD monitor, and after the above operation is carried out,the LCD monitor displays in a language that is different from the actual language setting.
See the firmware instructions and download the firmware upgrade by following these Fixya Tips :

  1. Follow this link to download a pdf version of the firmware installation instruction guide.
  2. Follow this link to download the Windows Version of the Canon EOS Rebel XS / Canon EOS 1000D firmware version 1.06 update.
  3. Follow this link to download the MAC version of the Canon EOS Rebel XS / Canon EOS 1000D firmware version 1.06 update.
  4. Follow this link to download the Canon EOS Rebel XS / Canon EOS 1000D Instruction Manual.

I hope that helps.

Posted on Apr 15, 2010

  • 73 Answers

SOURCE: turn on camera..view finder and/or display screen

The s7000 has three different display modes: Screen, viewfinder, and off. Screen is for looking at the big screen, viewfinder is for looking through the digital viewfinder, and off should turn off all the displays. Try pressing the DISP button once. That should reactivate the screen and make it possible to use the camera again.

Posted on Jul 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Cant see through my view finder on powershot s3 is


Your camera has an electronic view finder. To switch between the view finder and the display, you have to press the DISP. button several times and look what happens in Shooting mode and what in Playback mode. If only the display will come on, and the viewfinder stays black the camera will have a defect. If you can't use the camera anymore, because you only can shoot with the viewfinder, consider buying a new camera, because any repair will be more expensive than a new camera with the same quality.

Jan 19, 2014 | Canon PowerShot Cameras

1 Answer

Off lens,view finder is not workink


The view finder is the little window on the top left of the camera. If you want to use the display as a view finder, you have to press the button with the camera logo. It is called the life view mode. you use the same button to switch off the display. Be aware using the display, will drain the batteries quicker. Somewhat faster then with modern cameras.
see page 19 of the manual.

Dec 02, 2013 | HP Photosmart M307 Digital Camera

1 Answer

I have canon sd 750. its lcd gets black. Shows pictures etc but view finder remains dark. display is zz. what to do?


Look for DISP or DISPLAY button in the lower-right corner of the back of your camera. Press this once while the camera is turned on. The DISPLAY button manually turns the screen on and off. This is to save battery power for extended use. You would then use the optical viewfinder in its place.

Oct 25, 2010 | Canon PowerShot SD750 / IXUS 75 Digital...

1 Answer

My view finder is screen is black..... when I take a picture, it shows the pic taken then goes back to a blank screen... it happened at a concert... it was fine then it went black


Think that you might have accidentally pressed the DISP or DISPLAY button on the back of your camera. This manually turns the LCD display on and off to save batteries. You would then use the optical viewfinder in its place. To turn the screen back on, just press the DISP button one more time.

Apr 24, 2010 | Canon PowerShot A510 Digital Camera

1 Answer

Display screen no longer works while taking pictures


Sounds like they accidentally pressed the DISP or DISPLAY button on the back of the camera. This manually turns the screen on and off to save batteries. You would then use the optical viewfinder in its place. To turn the screen back on, just press the DISP button one more time with the camera turned on.

Aug 01, 2009 | Canon PowerShot A630 Digital Camera

1 Answer

My sony DSC-H1's LCD is not showing anything...but I can operate the camera with its view finder... Do you have any idea why it happens? and is there any master reset option for this camera?


I have a similar SONY camera. Turn the camera on and to the right of the viewfinder (or perhaps in a different location on your model) there will be a small button that reads, "FINDER/LCD". Press that button once to see if your view switches back from viewfinder mode to LCD display mode.

Jun 23, 2009 | Sony Cyber-Shot DSC-H1 Digital Camera

1 Answer

Black screen on canon sd1100 is


Actually, the problem was that the DISP button was pressed causing the screen to turn black to save battery life. Easy fix. Just pressed the DISP button again until the display showed what i was looking at through the view finder.

Jun 23, 2009 | Canon PowerShot SD1100 IS Digital Camera

1 Answer

I have a canon eos 450d which on the display screen only shows the information I can't see what I can see through the view finder, help please.


you have to enable the live view from the menu. then press the set button on the center of the arrow keys.

when shooting with the live view on, auto focus will not work if you press the shutter button halfway, you should press the button marked '*' to make the auto focus work. the small rectangle on the lcd monitor will turn green when correct focus is achieved.

Jul 07, 2008 | Canon PowerShot A530 Digital Camera

1 Answer

Query Regarding No Display on LCD (view finder) in Canon Digital IXUS 750


With the camera on, have you tried pressing the DISP button once? It's the lower left button on the back of the camera. It manually turns the display on or off as desired to save batteries (you can then aim through the optical viewfinder).

Mar 02, 2008 | Canon PowerShot SD550 / IXUS 750 Digital...

Not finding what you are looking for?
Photography Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bushnell Photography Experts

kakima

Level 3 Expert

102366 Answers

Tony

Level 3 Expert

2600 Answers

Brad Brown

Level 3 Expert

15478 Answers

Are you a Bushnell Photography Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...