Question about Zebra TLP 2824 Printer
If it's setting issue, you need to turn up the darkness to make it darker prints on lines.
It sounds like settings issue, remember darkness & speed combination is important.
Posted on Oct 21, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Don't shoot it, they're too hard to cook.
Make sure your program is set for the label size you're using. Also, there is a photo eye under the paper path that picks up the labels. It will, in time come out of adjustment. It can be cleaned with a swab and alcohol.
Posted on Sep 01, 2009
Change orientation in the printer driver.
Open printer & Faxes folder, Double click on printer driver icon,
Zdesigner driver, click on properties, click printing preferences, tick the box "rotate 180%" Click apply & ok.
If driver is Zebra TLP2824, same as above, but hit the + on "Paper output" and turn "rorate 180%" on, then click apply.
Posted on Nov 20, 2009
If you are using a ribbon remove it and perform a calibration, hold down feed key for 2 seconds as you power on, release key and wait for it to complete its calibration, when it has stopped shifting labels (wait for 10 secs to be sure) HIT THE FEED KEY to exit dump mode. If it has successfully calibrated it will feed a label each time you hit feed key. Re-install ribbon, make sure ribbon is pushed formly onto drive sprockets and then re-run the calibration..
If this does not fix problem. download firmware to latest version. This will automatically reset printer to factory default condition.
Posted on Nov 20, 2009
when submitting the print, un-tick the collate box. Use the properties section to check the speed settings in the driver and try again
Posted on Dec 20, 2009
Tips for a great answer:
Apr 19, 2014 | Zebra Eltron LP 2824 Thermal Printer
Jan 20, 2014 | Zebra Eltron LP 2824 Thermal Printer
Feb 27, 2017 | Zebra Office Equipment & Supplies
Oct 31, 2010 | Zebra TLP 2824-Z Printer
Nov 16, 2009 | Zebra TLP 2824 Printer
Sep 01, 2009 | Zebra TLP 2824 Printer
Jul 28, 2009 | Zebra TLP 2844-Z Thermal Label Printer
63 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: