Question about Computers & Internet

1 Answer

Hello I have just purchased a router D-link DIR-100 and attempted to update my firmware to the latest version which v2.02 b10, after update i cannot access my router's settings anymore nor the reset w

Hello I have just purchased a router D-link DIR-100 and attempted to update my firmware to the latest version which v2.02 b10, after update i cannot access my router's settings anymore nor the reset works either. is there another way to revert from that firmware update to its factory version which v2.00? please advise thank you

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 31 Answers

Why you do update fireware without backup

Posted on Apr 24, 2009

  • 1 more comment 
  • uterator Nov 05, 2010

    1. ????????? ??? ??????? (??????) ?? ??????????.
    2. ????????? ????????? ? D-Link DIR-100 ????? ???? WAN.
    3. ????????? ????????? ???????? ??????????? ? ?????????? (??????????? IP-?????)
    IP-?????: 192.168.0.2
    ?????: 255.255.255.0
    ????: 192.168.0.1
    4. ???????? ?????????? ???????? ???? D-Link DIR-100 (?????????? ???????).
    5. ??????? Internet Explorer (??? ????? ?????? ???????? ???????) ? ????????? ? ???????? ??????http://192.168.0.1 (?????? ????????? miniWeb Server ??????????).
    6. ????? ?????? ????? ?? ????????? miniWeb Server, ??????? ???????? ??? ?????????? (???????? ?????? ???? ? ??? ?? ??????????).
    7. ?????? ?????? Upload ? ????? ????????? ?????? ???????? ????????? ? ??????? Back, ?????? ?? Back.
    8. ?????????? ?? ???????? miniWeb Server, ?????? ?? ????????? ????? ???? fla, ????? ????????? ?????? ???????? ????????? ? ??????? Back ? ?????? ????? ?? Back. (????? ? ???? ????? ??????? ?? fla ????????? ??????? ?????????? ?????????? ?????????, ? ???????? ????? ? ????????? ?? ???????)
    9. ?????????? ?? ???????? miniWeb Server, ?????? ?? ????? ???? reboot.

  • uterator Nov 05, 2010

    1. Turn of your router and set confs on your pc
    IP: 192.168.0.2
    MASK: 255.255.255.0
    Connect to router by WAN and turn it on
    2. Open in IE the page.
    http://192.168.0.1 or http://192.168.0.1/up.htm
    it will open miniWeb Server.
    3. From that page select your firmware and upload it.
    After that press back.
    4. press "fla" (after that the browser can not open next page, so go back to miniWeb Serve page)
    5. press "reboot"
    After all this you should have access to your router as expected.

  • cableur2000
    cableur2000 Nov 18, 2012

    Tank you, is working for me

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

FIRMWIRE FOR DIR-615 REV M2


Usually you can login on your browser to you router and go to the management section to check for firmware updates and select that button and it will download and install the firmware. On some models, you have to go to the D-link web site and look for firmware updates for your router. Always check what you current firmware you have installed and check the version of your router modem hardware (A, B, C etc). Then you can manually download the firmware (usually in a ZIP file), open the zip file, and then using your browser connected to the router look for Update Firmware. You will have to go to where (folder) you saved the downloaded update and select that file. It is recommended that you update using a LAN connection and not a wireless connection.

Nov 26, 2013 | D-Link DIR-615 Wireless Router

1 Answer

How do i update the firmware on my Dlink DIR-300 and also where can i find the latest firmware for the same..!!!


DLink.com, go there. Support, device name, read instructions, download firmware, flash device.

Oct 24, 2013 | D-Link DIR-300 Wireless Router

1 Answer

Dlink dir 600 firmware corrupted


Usually you can login on your browser to you router and go to the management section to check for firmware updates and select that button and it will download and install the firmware. On some models, you have to go to the D-link web site and look for firmware updates for your router. Always check what you current firmware you have installed and check the version of you router modem (A, B, C etc). Then you can manually download the firmware (usually in a ZIP file), open the zip file, and then using your browser connected to the router look for Update Firmware. You will have to go to where (folder) you saved the downloaded update and select that file. It is recommended that you update using a LAN connection and not a wireless connection.

Jul 23, 2012 | D-Link DIR-600 Router

1 Answer

ASKING FOR FIRMWARE WHEN AM LONG IN


Hi,
Seems like the Firmware of the router is corrupt and it needs to be updated.
You can download the DIR-600 Firmware (from D-Link Official Site, under Support Resources). Download the Firmware, read the instructions carefully and proceed. DO NOT TRY TO UPDATE THE FIRMWARE OVER WIRELESS CONNECTION. Do it over a wired connection.
The following video describes the procedure of updating firmware on DIR-600


Hope it helps! Good Luck! Thanks for using Fixya!
CreativeTECH

Sep 09, 2011 | D-Link DIR-600 Router

1 Answer

Is there an update for this wireless router? I purchased it last March. I am having trouble with my Ipad and the Apple technician wants me to make sure I have the latest driver.


Check the D-Link.com website for the latest firmware updates and driver updates for your Apple computer.

I've found that D-link offers frequent updates to the firmware, for instance, which may affect the performance of the router with your Apple product.

Good luck on updating your D-link DIR-615.

Jan 11, 2011 | D-Link DIR-615 Wireless Router

1 Answer

How to get nat type 2 on a d-link 615


Disabel the UPnP on the Router and make sure you have Public WAN IP address from the Modem, if the firmware is not latest, update it to the latest one that should fix the NAT issue that you have.

Mar 19, 2010 | D-Link DIR-615 Wireless Router

2 Answers

DIR-655 wireless intermittment - connections drop -


Any one with a mac ... MAKE SURE "Enable Auto Channel Scan : " is OFF.

CHANGE the name of the WIFI Network.

SET the Channel to CH11 [Others interfere with phone signals]

SET Security to WPA, TKIP Cypher, 3600. Then enter your password [min 8 all lowercase chrs] Change it when you are working.

Save and unplug the router and you will be fine.

Feb 08, 2009 | D-Link Xtreme N DIR-655 Wireless Router

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

696 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...