Question about Acer Aspire 4315 Notebook

2 Answers

Help!!! ***STOP: 0x0000007B (0xF89E2524,0xC0000034,0x00000000,0x00000000)

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Stop 0x0000000 is a blue screen of death, so to fix it, start your computer, enter to bios screen, go to harddisk, change AHCI to IDE, then exit and save. then problem solve.

Posted on Apr 17, 2010

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 45 Answers

Wat is this

Posted on Apr 20, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1 -> ***STOP : 0x0000007B (0xF88A6525,0xC000034,0x00000000,0x00000000)


Could be a hdd error, in which case replace the hdd.

Nov 07, 2014 | Computers & Internet

1 Answer

Stop:0x0000007b


Hi Jefferson,
  1. Did you just install or make a change to a hard drive controller? If so, there's a good chance that the change you made caused the STOP 0x0000007B error.

    Undo the change and test for the 0x7B blue screen error.

    Depending on what changes you made, some solutions might include:

  2. Verify that the SCSI chain is correctly terminated, assuming you're using SCSI hard drives in your computer. Incorrect SCSI termination has been known to cause STOP 0x0000007B errors.

    Note: Most home computers don't utilize SCSI hard drives.
  3. Verify that the hard drive is properly installed. An improperly installed hard drive could cause STOP 0x0000007B errors and other issues.
  4. Verify that the hard drive is configured properly in BIOS. The STOP 0x0000007B error could occur if the hard drive settings in BIOS are incorrect.
  5. Scan your computer for viruses. Certain viruses that infect the master boot record (MBR) or boot sector can cause STOP 0x0000007B errors.

    Important: Make sure your virus scanning software is updated and configured to scan the MBR and boot sector.
  6. Update the drivers for your hard drive controller. If the drivers to your hard drive controller are outdated, incorrect, or corrupted then the STOP 0x0000007B error will likely occur.

    Note: If the STOP 0x0000007B error occurs during the Windows setup process and you suspect that the reason is driver related, be sure to install the latest hard drive controller driver from the manufacturer for use during the installation of the operating system.

    Note: This is a likely solution if the second hexadecimal number after the STOP code is 0xC0000034.
  7. Change the SATA mode in BIOS to IDE mode. Disabling some of the advanced features of SATA drives in BIOS could stop the STOP 0x0000007B error from showing up, especially if you're seeing it in Windows XP or during a Windows XP installation.

    Note: Depending on your BIOS make and version, SATA mode may be referred to as AHCI mode and IDE mode may be referred to as either Legacy, ATA, or Compatibility Mode.

    Note: While not a common solution, you may also want to try the reverse - see if IDE mode is selected in BIOS and if so change it to AHCI, especially if you see the STOP 0x0000007B error in Windows 8, Windows 7, or Windows Vista.
  8. Run chkdsk on your hard drive. If the boot volume is corrupted, the chkdsk command might repair the corruption.

    Important: You'll likely have to run chkdsk from the Recovery Console.

    Note: This will likely be the solution if the second hexadecimal number after the STOP code is 0xC0000032.
  9. Perform an extensive test of your hard drive. If your hard drive has a physical problem, one very likely situation is the STOP 0x0000007B error you're seeing.

    Replace the hard drive if the diagnostics you complete suggest that there is a hardware problem with the drive.
  10. Run the fixmbr command to create a new master boot record. A corrupted master boot record might be causing your STOP 0x0000007B error.

    Note: This will likely be the solution if the second hexadecimal number after the STOP code is 0xC000000E.
  11. Clear the CMOS. Sometimes the STOP 0x0000007B error is caused by a BIOS memory issue. Clearing the CMOS could solve that problem.
  12. Update your BIOS. In some situations, an outdated BIOS could cause a STOP 0x0000007B error due to incompatibilities with a hard drive controller.
  13. Update the hard drive controller's firmware if possible. Just as with the BIOS in the previous step, an incompatibility could be causing the 0x7B error and a firmware update from the manufacturer may correct the problem.
  14. Repair your Windows installation. If you've just replaced the motherboard in a computer without reinstalling Windows then this will likely fix your problem.

    Note: Sometimes a Windows repair will not fix a STOP 0x0000007B error. In those cases, a clean installation of Windows should do the trick.

    If you haven't just replaced your motherboard, a Windows reinstall probably will not fix your STOP 0x7B issue.
Hope this helps,
If you need further assistance please get back in touch and i'll see what else we can do.

Thanks,
Gary

Oct 17, 2013 | Toshiba Computers & Internet

1 Answer

My toshiba netbook nb205 n311/w won't load windows xp, stop message: 0x0000007B


0x0000007B = INACCESSIBLE_BOOT_DEVICE This means that the hard disk is corrupted and/or defective and the only thing you can do is to replace it and reinstall Windows.

Apr 30, 2011 | Toshiba NB205-N311/W Netbook

1 Answer

I am getting a stop 0x0000007b and it is not letting me do anything


When people have writen about this as extensively in the article below, you are best served by my posting the link for you.

If it looks like Greek and completely confusing, take your computer to someone who has a "boot disk" so they can fix it.

http://pcsupport.about.com/b/2009/01/24/stop-0x0000007b-blue-screen-errors.htm

If we we're in Chat, I could work with you through options. That's just too much to do here in an answer.

Regards,

TheSelkie

Oct 04, 2010 | Dell Dimension B110 PC Desktop

1 Answer

Tachnical information massege are *** STOP: 0x0000007B (oxF78A6524,0XC0000034,0X00000000,0X00000000)


Hi There..

When you say STOP 0x0000007B, then i'd say its because of driver, virus, or hardware issues.

Did you installed any new hardware or any other software recently?.
If yes, please try booting the computer in SAFE MODE or Last Known Good Configuration.
If still the same then try booting the computer in recovery console.
Try running the chkdsk /r and fixboot.
Restart the computer and try. Hope that should work..

Please revert if the same problem

Jan 30, 2010 | Compaq Presario Notebook

2 Answers

After formatting my pc is unable to run


(1)When you power up the computer press F8 key thne if you are able to see safe mode and other menu then enter in safe mode.Then go to start menu->run type in run "chkdsk /r"
thne press "y" then scan your computer with antivirus. uninstall that antivirus because sometimes it conflict to windows.
then restart computer thne wait untill it check disk and fix errors.
Then you can see desktop screen.
(2)But if you are not able to enter in safe mode then you need windows disk or recovery disk.
Then boot computer with that disk.
For that when you power up the computer press F1 or F2 or "del" key to enter in bios .
Then go to boot option and set frist boot device as your cd or dvd drive.
Then save and exit settings.
Then insert disk in rom then it boot with that disk.
then follow the procedure and enter in recovery console .
Type in console prompt "chkdsk /r"
the press "y"
then it fix error on disk.
Then check in normal mode if still not load windows then follow above procedure again but this time select repair previous windows option so it repairs old windows and you get your old windows .
Let me know if you need further assistance.,
Thanks

Nov 06, 2009 | Computers & Internet

2 Answers

O*oooooo7b(0*f7a21524,0*c0000034,0*00000000,0*00000000)


If you can install Windows Vista and only XP not work for sure this is the solution :
SATA operation mode is AHCI
To change this :
Open BIOS
Look for SATA Operation Mode or somethin equivalent and change-it to IDE or Compatibility Mode.

Jul 19, 2009 | Compaq tc4400 Tablet PC

2 Answers

ERROR INSTALLING WIN XP PRO STOP: 0X0000007B (0XF78D2524


1.you need to get BIOS with DEL button (maybe your computer has another button for this.)

2. Expand the "Drives" section

3. Go to "SATA Operation"

4. Change this from "RAID Auto/AHCI" to "RAID

May 29, 2009 | Computers & Internet

1 Answer

It dasent stared the warning stop:0x0000007B(0xfbcee528,10x00000000,ox00000000)


please check the IDE cable, make sure it appear as primary drive, if problem not solve format your drive if nothing happen its better to buy new.

Oct 25, 2008 | Western Digital My Book Essential Edition...

Not finding what you are looking for?
Acer Aspire 4315 Notebook Logo

Related Topics:

546 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Mohammed Ebrahim M
Mohammed Ebrahim M

Level 3 Expert

586 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Are you an Acer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...