Question about Photography
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Bell+Howell FILMO 8mm Projector
Thank you for using FixYa for your problem
sounds like the takeup belt is wrong or the speed motor
Please rate our solutions and if you still have problems please call back for more ideas to help you
Posted on Dec 01, 2009
I find this directions for the Bell & Howell Auto Load 8mm Super Movie Projector: Super 8 is a small format motion picture film that came into widespread use in the 1960s and '70s. Prior to Super 8's introduction to the home movie market in 1965, the most common formats were 8 and 16 mm. Super 8 widened the frame without widening the film, making it possible to project Super 8 and 8 mm film through the same projectors. One ubiquitous model was the Bell and Howell Autoload.
1. Raise the reel arms upward and outward. Put the takeup reel on the back arm and the processed roll of Super 8 film on the front arm. The end of the film should point toward the projector.
2. Push the power switch all the way up so that the light comes on. You will hear the projector motor fire up. Make sure the direction lever that sticks out of the middle of the projector horizontally is set to forward rather than in reverse.
3. Press down on the upper loop former, the lever just below and to the left of the front reel. Line the end of the film up with the opening in the front of the loop former and let the projector pull it through. The film will wind through the sprockets and begin to spool out at the bottom of the projector.
4. Let go of the upper loop former and pull the film underneath the guide rollers at the bottom left and right corners of the projector. The film will continue spooling through slowly. Allow it to do so until it is long enough to reach the takeup reel.
5. Slip the end of the film leader into one of the holes in the center of the takeup reel. Your film will begin to project as soon as the leader spools all the way through.
Additionally, here can find some details:
- Instructions for a Bell & Howell 8mm Projector
- How to Operate a B&H 8mm Film Projector
Hope this helps,
Posted on Jul 09, 2011
Tips for a great answer:
Feb 18, 2018 | Bell & Howell Cameras
Nov 01, 2016 | Bell & Howell Cameras
Feb 28, 2016 | Bell Howell Cameras
Feb 14, 2016 | Bell & Howell Cameras
Nov 18, 2015 | Bell & Howell Cameras
Oct 11, 2015 | Bell & Howell Bell And Howell Model 256...
Apr 23, 2011 | Computers & Internet
May 20, 2008 | Photography
48 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: