Bluetooth passcode i have a bluetooth made by motorola is an sgh-a767 which i had a tech program on a previous cell phone i am trying to add to my new phone

Your phone is fried, There is really no fix for this. Unless you have a extremely upstanding warranty on it, you're going to have to buy a new one. This phone eventually goes bad anyway, turning itself off, and on, and calling people by itself and texting people by itself, goes past your passcode when you boot it... It's really just not a good phone, and it's definately done after it's been through wash cycle. Best of Luck.

Hello
What you have to do is to is to open the bluetooth menu on your phone and touch the bluetooth logo to put on the bluetooth radio.

Highlight add a new device,your phone will search for bluetooth device that are within that range and when you see the name of your bluetooth device appear on the screen press next.

Enter the bluetooth device passcode,this can be found in the device owners manual.if the passcode is accepted then press done.The pairing process between your phone and a bluetooth device is complete.
BEST OF LUCK

If you are doing it via bluetooth, yes.

Passkey refers to a password needed to connect a Plantronics Bluetooth headset to a Bluetooth device. For most Plantronics products, this passkey is 0000.
Hope this help you

Code is 0000 make sure you press the green button to turn on the bluetooth light on the Blue Ant, while pairing AND when you enter the code(don't hold it down, just make sure it's on before you finish entering it).

try 0000 or 9999...these are the common codes for any bluetooth headset.good luck.

here is the manual for the lg CU515: http://www.wireless.att.com/support_static_files/manuals/LG_CU515.pdf
however, you should just be able to go to the bluetooth menu, select "search new device" (looking for "Motorola H500"), then press "add" - the passcode should be "0000" (without the quotes)

wats the passcode for a 9xx plantronics bluethoot

Most Motorola bluetooths have a default passcode of 0000 and cannot be changed.

removing the bluetooth is as simple as this:

menu, settings, connectivity, bluetooth, my devices, press down to get to the device you want to delete, press options, then delete.

h700:

menu, settings, connectivity, bluetooth, my devices, (should have at the top: search for new devices scrolling). Click that:

h700 bluetooth should be in pairing mode:

hold the center button down and wait for it to turn solid blue: the go back and search for new devices on the phone, when it finds the bluetooth, enter 4 0000 zeros for the passcode. The click if you want it to automatically connect or not.

Your done!

Clint Cartee