Question about Hitachi 42HDX62 42 in. HDTV Plasma Television

Open Question

How can i set my color hitachi 42pd5000 plasma tv

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: Hitachi 1080i Plasma TV

In the video setting go down to reset. You will only need minor adjustment after a reset.
chrislorrie@sbcglobal.net

Posted on Feb 15, 2008

premtech
  • 934 Answers

SOURCE: the color is low

If this is a 50V500 record the I2c buss settings then "Memory Inti" then re-write the recorded data. Solves about 80% of the color distortion problems. If it's not a 50V500 you need to expound on your problem and include the model number.
Bill

Posted on Mar 29, 2008

  • 144 Answers

SOURCE: 37" hitachi plasma tv doesnt turn on

If you have a light on ( standby light ), then I would say power supply fault, tv could be shut down because of faulty capacitors in power supply. if you dont have any lights at all , check fuse in plug,
( there will almost certainly be a fuse in the tv) but, that is for a tv guy to fix.
pete

Posted on Nov 10, 2010

  • 1156 Answers

SOURCE: my hitachi plasma tv model

Hey,

A common problem for these is bad capacitors in the power supply, Remove the back from your TV and look at the power supply on the left hand side.

You will see roughly around 9 x capacitors that are bulged / domed shaped on top usually these are valued at 3300uf 10V any that have bulged or leaked a brown like substance should be changed.
This will cure the problem as they overheat being sat next to a heatsink that gets very hot!
Try and change them for the same 3300uf but a higher voltage.if otherwise, the power supply board is dead, u know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.

Hope this will help to fix the problem and do take care in handling the problem.....

Posted on May 26, 2011

tav75
  • 50 Answers

SOURCE: I have a Hitachi 42pd5000 but I carnt find the

if im not mistake is on lateral side near the RCA plugs and card reader

Posted on May 04, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sound but no image on Hitachi 42pd5000


Two things need to be checked. The ballast board and the T-con board. Shine a flashlight on the screen with the TV on...If you see a faint picture moving, then the T-Con board is OK. The ballast board for the white backlight is bad. If you don't see a faint picture, then the T-con board is bad. You can get parts here: www.shopjimmy.com TV Parts Universal TV Stands DLP Chips ShopJimmy

May 23, 2017 | Hitachi Televison & Video

1 Answer

I can't get any sound from my Hitachi 42PD5000 TV


try to connect an external speaker then if you got sound... then problem is on your internal speaker or otherwise in your settings....

Apr 30, 2014 | Televison & Video

1 Answer

I can't get any sound from my Hitachi 42PD5000


Make sure the speakers have not been turned off in the menu.

Apr 30, 2014 | Hitachi Televison & Video

1 Answer

My hitachi plasma tv model 42PD5000 wont turn on.the red light by the switch wont turn on either.i have checked fuse on plug which is ok.please advise what may be the problem. Thanks Roberto


Hey,

A common problem for these is bad capacitors in the power supply, Remove the back from your TV and look at the power supply on the left hand side.

You will see roughly around 9 x capacitors that are bulged / domed shaped on top usually these are valued at 3300uf 10V any that have bulged or leaked a brown like substance should be changed.
This will cure the problem as they overheat being sat next to a heatsink that gets very hot!
Try and change them for the same 3300uf but a higher voltage.if otherwise, the power supply board is dead, u know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.

Hope this will help to fix the problem and do take care in handling the problem.....

May 26, 2011 | Hitachi 42HDS69 42 in. Plasma Television

3 Answers

Instuction maual for hitachi plasma tv model no P50X01AU


These are the only manuals available. Maybe one of them will help.

  • Hitachi P60XR01U manual for Plasma TV
  • Hitachi P60XR01E manual for Plasma TV
  • Hitachi P60X901 manual for Plasma TV
  • Hitachi P55T551 manual for Plasma TV
  • Hitachi P55H4011 manual for Plasma TV
  • Hitachi P55H401 manual for Plasma TV
  • Hitachi P50XR01U manual for Plasma TV
  • Hitachi P50XR01E manual for Plasma TV
  • Hitachi P50X902 manual for Plasma TV
  • Hitachi P50X901 manual for Plasma TV
  • Hitachi P50V702 manual for Plasma TV
  • Hitachi P50V701 manual for Plasma TV
  • Hitachi P50TP01UA manual for Plasma TV
  • Hitachi P50TP01U manual for Plasma TV
  • Hitachi P50TP01EA manual for Plasma TV
  • Hitachi P50TP01E manual for Plasma TV
  • Hitachi P50T501A manual for Plasma TV
  • Hitachi P50T501 manual for Plasma TV
  • Hitachi P50T01UA manual for Plasma TV
  • Hitachi P50T01U manual for Plasma TV
  • Hitachi P50T01EA manual for Plasma TV
  • Hitachi P50T01E manual for Plasma TV
  • Hitachi P50S602 manual for Plasma TV
  • Hitachi P50S601 manual for Plasma TV
  • Hitachi P50H401A manual for Plasma TV
  • Hitachi P50H4011A manual for Plasma TV
  • Hitachi P50H4011 manual for Plasma TV
  • Hitachi P50H401 manual for Plasma TV
  • Hitachi P50A402 manual for Plasma TV
  • Hitachi P50A202 manual for Plasma TV
  • Hitachi P42TP01U manual for Plasma TV
  • Hitachi P42TP01E manual for Plasma TV
  • Hitachi P42T501A manual for Plasma TV
  • Hitachi P42T501 manual for Plasma TV
  • Hitachi P42T01UA manual for Plasma TV
  • Hitachi P42T01U manual for Plasma TV
  • Hitachi P42T01EA manual for Plasma TV
  • Hitachi P42T01E manual for Plasma TV
  • Hitachi P42H401A manual for Plasma TV
  • Hitachi P42H4011A manual for Plasma TV
  • Hitachi P42H4011 manual for Plasma TV
  • Hitachi P42H401 manual for Plasma TV
  • Hitachi P42H01U manual for Plasma TV
  • Hitachi P42H01E manual for Plasma TV
  • Hitachi P42A202 manual for Plasma TV
  • Hitachi P42A01 manual for Plasma TV
  • Hitachi CL42PD2100 manual for Plasma TV
  • Hitachi CL37PD2100 manual for Plasma TV
  • Hitachi CL32PD2100 manual for Plasma TV
  • Hitachi 70VX915 manual for Plasma TV
  • Jan 31, 2011 | Cell Phones

    2 Answers

    Its dead no led on switch on and no picture


    Yes it has a AC fuse you can check it but I have not seen one the was open. I think your problem is in the SMPS.

    May 18, 2009 | Hitachi 42 in. Plasma TV

    2 Answers

    Noise from hitachi 42PD5000


    The noise is coming from one of the plasma driver boards. There are 2 inside the set. These are essentially power supplies for the plasma itself and contain many capacitors. The noise you hear is some oscillation inside a cap or two. This is an indication that one or more components have drifted from their rated value. While the set will continue to work for a while, that board should be replaced. If the board fails, 1/2 of the picture will be blank or the set will not start at all. Call around to get the cost of that board. Please note that continued use of the set WILL NOT cause any harm. This is an annoyance only at this point.

    Dan

    Apr 29, 2009 | Panasonic Viera TH-42PX80U Plasma TV

    1 Answer

    Cant play dvd as color is black and white.


    go in to the menu and change the system setting back to pal.
    If this doesnt work unplug the TV from the power point for 30 seconds and plug it back in

    Dec 15, 2007 | Hitachi 42HDT52 42 in. Plasma HDTV

    Not finding what you are looking for?
    Hitachi 42HDX62 42 in. HDTV Plasma Television Logo

    Related Topics:

    24 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Hitachi Televison & Video Experts

    Jaime Hernandez

    Level 3 Expert

    2317 Answers

    The Knight
    The Knight

    Level 3 Expert

    74106 Answers

    matt martin
    matt martin

    Level 3 Expert

    1210 Answers

    Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...