Question about Televison & Video

1 Answer

I have picture but my volume will not come on

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

The speaker loss may be a defective audio amplifier. Easy to check. Connect a known good speaker to the wires or terminals of the bad channel; if the good speaker doesn't produce sound, then the amplifier is likely a goner.
If it has external speaker connections for connecting to other speakers. If you have tried them and still no audio, then the amplifiers are kaput, for sure.

Check for obvious signs of fuses on the audio amplifier board.

In my opinion, getting the audio amplifier modules fixed or replaced will be more expensive than buying a small audio amplifier and a couple of speakers and connecting it up to the variable audio output jacks on the back of the tv.

Thanks for using FixYa - If you require further clarification about this question - please use the "Continue With this Expert" feature.

Thank You!! :D

Posted on Apr 24, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am trying to use the screen snapshot and every time I use the volume and on/of button the picture takes the picture but it shows the volume control status.


It is possible that you are not pressing the two buttons at the exact same time. If you press the volume button a little bit before the power button you will have to wait for the volume bar to fade away before you take another screenshot.
If this isn't the issue then the phone might have a programing error

Feb 22, 2016 | ZTE Cell Phones

1 Answer

No picture on my flat screen but I have volume


Is there back light or is there a picture if you shine a flashlight at the screen, looking at an angle?

Aug 26, 2014 | Hisense Televison & Video

1 Answer

Tv has no volume or picture but turns on


replace the mainboard and power supply.

Jan 21, 2013 | Televison & Video

1 Answer

Picture went out on flat screen volume is fine


Hello,

sounds like your vertical circuit was going bad then might have overheated and killed the power supply. a repair cost might range around $300.00
Good luck...

Jun 01, 2010 | Televison & Video

1 Answer

I don't know how to use the pip button, i know it means picture in picture and it's like a double screen but how do you change the channel or volume on each side of the screen?


You can only hear the audio from one picture at a time. You can change the volume the same way you would normally change the volume. Let me know if you have any further questions.

Nov 20, 2009 | Hitachi CLU-4324UG Remote Control

1 Answer

P61960


I was tring to remove the concave off my screen and came across a setting where you can make the picture larger or smaller. On the TV, not the remote, press and hold the menu button, press and release the power button, press and release the volume up button and release the menu button. P0 and V0 will be displayed on the screen press the volume up button until the V0 is V76. Press the channel up button until P0 is P11 and press the volume up/down button to make the picture larger/smaller. If you need to center the picture press the channel down button until P11 is P10 and press the volume up/down button to center your picture. I hope this helps

Aug 18, 2008 | RCA P61960 61" Rear Projection Television

1 Answer

Picture


sorry dry solder joints this model was a disaster for this not worth repairing

Oct 12, 2007 | Toshiba 32A35 32" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74245 Answers

Cindy Wells

Level 3 Expert

5127 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...