Question about Singer CE-100 Futura Computerized Sewing Machine
Suggest to also install the earlier windows version that can recognize your CE100 software into your computer.
Posted on Oct 15, 2013
Testimonial: "Thank you josephamoi for your solution. Sincerely appreciate. I just don't have the disk for the earlier version. I will try to find one though."
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: singer ce100 start button
Yes I am trying to use the embroidery unit when the start button won't work...it works up to the point of pressing start to embroider. The design is sent and ready to go.
Posted on Nov 04, 2008
I received an email back from Singer stating that it is not possible at this time to load the Futura software on a 64-bit system using Vista. I have emailed to ask whether it would load if the OS were XP, but I haven't heard back yet.
They said that they were working on finding a fix for this, but they aren't sure that they will since it's a hardware problem.
Posted on Mar 09, 2009
So here's what I did and it worked for me. Somehow the WinDriver that is on the software is uninstalling itself and needs to be listed with the drivers for Jungo for this software to work. I installed the software when I first got the machine with no problems, then suddenly I couldn't open it and was receiving the same connection error. When you go to http://www.futura-support.com/faq/machine.htm#2 to install the drivers, you'll notice their screen shot shows both the CLEM driver and the WinDriver. Check your machine following their instructions to see if you have both listed under the Jungo driver. If not, go to http://www.jungo.com/st/windriver_usb_pci_driver_development_software.html and select the link under "Available WinDriver Toolkits" for your operating systems (I selected WinDriver USB for Windows). It asks a bunch of questions which I didn't know the answer to so I selected "other" on almost everything then entered "NA"or "?" for the other description. Select Download now and it will need to restart your computer. Once done, I looked at the device manager again and now WinDriver is listed under Jungo and CLEM and the software opens, no problems.
This will at least temporarily solve the issue, however, it's a free trial which means the download will expire at some point. Good news is, the windriver is on the futura disk, I just don't know why it's not installing or staying on the machine. I am sending all of this to Singer to figure out what they're missing in the installation files and hopefully get a fix permanently.
Posted on Mar 13, 2009
Tips for a great answer:
Oct 13, 2013 | Singer CE-100 Futura Computerized Sewing...
Nov 13, 2012 | Singer CE-100 Futura Computerized Sewing...
Apr 26, 2011 | Singer CE-100 Futura Computerized Sewing...
Apr 22, 2011 | Singer CE-100 Futura Computerized Sewing...
Feb 15, 2011 | Singer CE-100 Futura Computerized Sewing...
Jul 29, 2010 | Singer CE350
Mar 22, 2010 | Singer CE-200 Quantum Futura Computerized...
Sep 27, 2009 | Singer CE-100 Futura Computerized Sewing...
Mar 02, 2009 | Singer CE-100 Futura Computerized Sewing...
115 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: