Question about Miscellaneous

9 Answers

Roof repair - Miscellaneous

Posted by on

9 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Years ago damaged roof repaired was a difficult task. It is a difficult task to choose a reliable roofing contractor. Each roof repair contractor has his own skill and style of repairing the roof. When you are looking for a roof repair contractor, try to find yourself one who has enough experience working with the same material as the material used in the roof that you wish to get repaired.To get more information about roofing installing & repairing visit: http://southshoreroofingma.com/residential-roofing/

roof repair - toledo-roof-repair-com-j0ymxvoxj2qbsxriuwo4cxek-3-0.jpg

Posted on Jul 10, 2017

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 4 Answers

Re-roofing may be sometime very difficult task. It required lots of safety and need extra attention. You need arrange your home accordingly.
You must hire a professional roofers for this task. They can do it better. You can refer roofers sheffield for more details.

Posted on Jun 12, 2017

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Gone are the days when getting a damaged roof repaired was a Herculean task, and was sure to give people many a sleep less night. These days however, instead of having to worry about getting the roof repaired, most people find themselves spending many a sleep less night finding the 'right roof repair contractor' for doing the job.

http://hometowncommercialroofing.com/commercial-roof-coatings/

Posted on Dec 06, 2016

  • Level 1:

    An expert who has achieved level 1.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Corporal:

    An expert that has over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Contributor
  • 1 Answer

It is important for roof repairs to be made by a qualified roofing service provider. To ensure its workers are ready for dealing with commercial roof repairs and other needs, a truly professional roofing company will have given them professional training. It will also have quality control standards in place to ensure workmanship is done according to high measures of excellence.http://www.fivestarcommercialroofing.com/

Posted on Sep 19, 2016

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 81 Answers

If you have a Shingle roof so you can easy to fix. Just find out how to repair a split Shingle roof by re-attaching or exchanging damaged. You can consult with any online roofing company houston.

Posted on Apr 17, 2015

  • Anonymous Apr 08, 2016

    2013.
    my guess is you are joking.

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 102 Answers

Many roofing contractors you will find in your area, make sure that the quality of material being used is best. A good contractor use latest technology such as synthetic felt and use storm guard to protect from wind and hail. An experienced contractor will also provide guidance to an insurance claim and wait till the process complete, cmconstructionremodeling best roofing company in Houston.

Posted on Apr 09, 2015

  • Anonymous Apr 08, 2016

    Douglas OFee on Oct 13, 2013

×

I am looking for roofing repair. I just have some shingles that I need replacing. Every time a storm comes through we lose some.

Posted on Oct 22, 2014

  • Anonymous Apr 08, 2016

    Douglas OFee on Oct 13, 2013

×

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

I would try and assess the damage first so when you call a contractor you can give them as much information as possible. Determine if you lost shingles in just one area of the roof or if there are several areas. Then, like Xavier said, talk to your insurance provider and determine what is and isn't covered and they can then redirect you!

Paul Jeffers
Starkweather and Sons Roofing and Siding Residential and Commercial...

Posted on May 27, 2014

  • Marie Watson
    Marie Watson Apr 08, 2016

    Paul, you make a good point about trying to assess the damage, so you can give the roofing company as much information as possible. It seems like knowing how much damage there is can also give you a better idea of who you need to call as well. I would think that it is also important to speak with your insurance provider, like you mention, so they can refer you to someone to help with the repairs. http://www.akgeneralroofing.com

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 54 Answers

Silicone lol

Posted on Oct 13, 2013

  • Anonymous Oct 14, 2013

    I've been needing help with roofing in Oakville. Does anyone know of any good repair companies around that area?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Where I found the Full-Service of Commercial Roofing Company?


Types of Roofing services provided by a Roofing companies are:
1. Restoration: The service provides while restoration is, replacing or repairing the damage caused by the change of environment.
2. Domestic Roofing: They ensure that all aspects of your roofs are in good condition or not.
3. Commercial/ industrial Roofing: They provide a wide range of Commercial and industrial services as well as regular maintenance.
4. Emergency Roofing: A roofing company also provide an Emergency roofing services in case of emergency.

One of the companies, which provides this all services to their customers is Reddicap Roofing Birmingham. I personally had a great experience with them. They had a team of best roofers.

istock-507847658-r5nwj1elaatqft4ztyq21s42-1-2.jpg

Oct 21, 2016 | Cars & Trucks

1 Answer

Sunroof will not close. Was working fine earlier today


The roof opening panel assembly uses an integrated motor and module to operate the roof opening panel. The roof opening panel motor and module are installed new as an assembly. The roof opening panel is an electronically operated glass panel that can be opened or closed by the roof opening panel switch. Actuating the switch in either a forward or rearward motion supplies a ground to the roof opening panel motor/module. The soft-stop function is controlled by the roof opening panel motor/module. The roof opening panel has 3 modes of operation, manual mode, express open and tilt. The express open feature is activated when the switch is pressed momentarily. The tilt feature is activated when the tilt switch is depressed. These functions are controlled by the roof opening panel motor/module.
Visual Inspection Chart Mechanical Electrical
  • Roof opening panel
  • Roof opening panel frame
  • Roof opening panel drain hoses
  • Roof opening panel lifter assemblies
  • Roof opening panel water trough
  • Roof opening panel rear trough guides
  • Roof opening panel air deflector assembly
  • Roof opening panel seal
  • Roof opening panel shield
  • Smart junction box (SJB) circuit breaker 47 (30A)
  • Circuitry
  • Accessory delay relay
  • Roof opening panel switch
  • The roof opening panel does not open or close - one direction only
  • Circuitry
  • Roof opening panel switch
  • Roof opening panel motor assembly
  • Go To Pinpoint Test E .
PINPOINT TEST E: THE ROOF OPENING PANEL DOES NOT OPEN OR CLOSE Test Step Result / Action to Take E1 CHECK THE ROOF OPENING PANEL LIFTER ASSEMBLIES FOR OBSTRUCTIONS OR DAMAGE
  • Check the roof opening panel lifter assemblies for obstructions and damage.
  • Are the roof opening panel lifter assemblies OK?
Yes
GO to E2 .

No
REMOVE all obstructions and REPAIR any damage. If lifter assemblies cannot be repaired, INSTALL a new roof opening panel frame. REFER to Roof Opening Panel Frame in this section. TEST the system for normal operation. E2 CHECK THE ROOF OPENING PANEL WATER TROUGH AND REAR TROUGH GUIDES
  • Check the water roof opening panel water trough and rear trough guides for any loose obstructions.
  • Are the roof opening panel water trough and rear trough guides installed securely and free from obstructions?
Yes
GO to E3 .

No
REMOVE all obstructions from the roof opening panel water trough and install securely. SECURE the rear trough guides or INSTALL new roof opening panel rear trough guides if damaged. REFER to Roof Opening Panel Rear Trough Guide in this section. TEST the system for normal operation. E3 VERIFY THE ROOF OPENING PANEL ADJUSTMENT
  • Verify the roof opening panel is adjusted correctly.
  • Is the roof opening panel adjusted correctly?
Yes
GO to E4 .

No
ADJUST the roof opening panel. REFER to Roof Opening Panel Alignment - Horizontal Adjustment and Roof Opening Panel Alignment - Height Adjustment in this section. TEST the system for normal operation. E4 CHECK THE ROOF OPENING PANEL MOTOR/MODULE FOR INITIALIZATION
    NOTE: The roof opening panel motor initialization procedure must be done when repairs are carried out on any part of the roof opening panel assembly, including whenever the roof opening panel motor/module has been removed from the roof opening panel assembly, a new roof opening panel motor/module has been installed or when a new roof opening panel assembly has been installed. Refer to Roof Opening Panel Motor Initialization in this section.
  • Carry out the Roof Opening Panel Motor Initialization procedure. Refer to Roof Opening Panel Motor Initialization in this section.
  • If the concern still present?
Yes
GO to E5 .

No
The system is operating correctly. The roof opening panel motor/module was uninitialized. E5 CHECK THE POWER WINDOWS
  • Key in ON position.
  • Verify the power windows operate.
  • Do the power windows operate?
Yes
GO to E6 .

No
REFER to Section 501-11 to diagnose the accessory delay relay circuit. E6 CHECK THE ROOF OPENING PANEL SWITCH
  • Carry out the roof opening panel switch component test. Refer to Wiring Diagrams Cell 149 for schematic and connector information.
  • Did the roof opening panel switch pass the component test?
Yes
GO to E7 .

No
INSTALL a new roof opening panel switch. TEST the system for normal operation. E7 CHECK CIRCUIT CBP47 (GN/BU) FOR VOLTAGE
  • Key in OFF position.
  • Disconnect: Roof Opening Panel Motor/Module C922.
  • Key in ON position.
  • Measure the voltage between roof opening panel motor/module C922-4, circuit CBP47 (GN/BU), harness side and ground.
    s7j~tr~en~file=a0083978.gif~gen~ref.gif
  • Is the voltage greater than 9 volts but less than 16 volts?
Yes
GO to E8 .

No
VERIFY the smart junction box (SJB) circuit breaker 47 (30A) is OK. If OK, REPAIR the circuit. TEST the system for normal operation. E8 CHECK CIRCUIT GD143 (BK/VT) FOR AN OPEN
  • Key in OFF position.
  • Measure the resistance between roof opening panel motor/module C922-3, circuit GD143 (BK/VT), harness side and ground.
    s7j~tr~en~file=a0084276.gif~gen~ref.gif
  • Is the resistance less than 5 ohms?
Yes
GO to E9 .

No
REPAIR the circuit. TEST the system for normal operation. E9 CHECK CIRCUITS CPR37 (YE/GY), CPR39 (VT/WH) AND CPR40 (YE/OG) FOR AN OPEN
  • Disconnect: Roof Opening Panel Switch C930.
  • Measure the resistance between the roof opening panel motor/module C922-1, circuit CPR40 (YE/OG), harness side and roof opening panel switch C930-8, circuit CPR40 (YE/OG), harness side. Measure the resistance between roof opening panel motor/module C922-2, circuit CPR39 (VT/WH), harness side and roof opening panel switch C930-11, circuit CPR39 (VT/WH), harness side. Measure the resistance between roof opening panel motor/module C922-5, circuit CPR37 (YE/GY), harness side and roof opening panel switch C930-14, circuit CPR37 (YE/GY), harness side.
    s7j~tr~en~file=n0054600.gif~gen~ref.gif
  • Are the resistances less than 5 ohms?
Yes
GO to E10 .

No
REPAIR the circuit. TEST the system for normal operation. E10 CHECK FOR CORRECT ROOF OPENING PANEL MOTOR/MODULE OPERATION
  • Disconnect the roof opening panel motor/module connectors.
  • Check for:
    • corrosion.
    • pushed-out pins.
  • Connect all roof opening panel motor/module connectors and make sure they seat correctly.
  • Operate the system and verify that the concern is still present.
  • Is the concern still present?
Yes
CHECK the jumper harness between the vehicle harness and the roof opening panel for open or shorted circuits. If the jumper harness is not OK, INSTALL a new jumper harness between the vehicle harness to the roof opening panel motor/module. Otherwise, INSTALL a new roof opening panel module/motor. REFER to Roof Opening Panel Motor in this section. TEST the system for normal operation.

No
The system is operating correctly at this time. Concern may have been caused by a loose or corroded connector. TEST the system for normal operation.

May 08, 2016 | 2008 Ford Expedition El

4 Answers

What Is Roof Restoration Coating?


I am currently obtaining information on roof paints and I can share what I have found out
roof restorers use a membrane paint rather than an ordinary acrylic paint or enamel paint as it is the most resilient paint for the application
IT is applied at a pressure of 3000 psi from a special gun and paint pump, cannot be rollered or brushed and goes on to a thickness of 150 microns ( around .120")
the cost is around $400.00 for 10 litres which covers around 10 sq meters ( 3ftx3ft)
acrylic can be sprayed or rollered or brushed on and is good for about 10-15 years depending on the roof to start with (thickness around .030" --same as car paint job)
costs around $180.00 for 15 lts and covers 14-16 sq meters
namel should be avoided as it does not have the capacity to expand or contract with temperature changes
professional roof restorers will repair any problems , clean the roof off and then apply the membrane paint as it gives a good quality result
other than that I would talk with paint suppliers as they have the same membrane paint that the professionals use and get ideas as to the way to go.

Aug 07, 2015 | Air Tools & Compressors

2 Answers

Why isn't the electric roof working?


Make model year and engine ?

Jul 31, 2015 | Cars & Trucks

2 Answers

Roof Repair


If you are looking for roof repair services then BP Roofing could be best solution for you. Welcome to BP Roofing Best Roofers Auckland

May 18, 2014 | Roofing

Not finding what you are looking for?
Miscellaneous Logo

Related Topics:

551 people viewed this question

Ask a Question

Usually answered in minutes!

Top Miscellaneous Experts

steve cannon

Level 1 Expert

23 Answers

Philippe Dekyvere

Level 1 Expert

20 Answers

bill tarkulich

Level 1 Expert

33 Answers

Are you a Miscellaneous Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...