Question about Black & Decker Black Decker 16" Hedge Trimmer
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
I use a dremel with a sharpening stone, if u don't have one you can also use a power drill with a small sanding disk (1 inch) and course sand paper (30 or 40 grit). or you can use a bastard file. its too tight to use any kind of angle guide so just take your time and do it by eye. it shouldn't take much to get them sharp enough to do the job, over-sharpening is unnecessary and dangerous, and will make the blades dull faster. sharpen all the free blades, top and bottom, then start the trimmers to advance the blades to free up the sides you couldn't get. i use a light penetrating oil to clean the blades first, then lithium grease spray to lubricate.
Posted on Nov 28, 2008
You may have a piece of metal between the moving blade and the stationary one. Also the motor may have been at the top of the stroke when it stopped. You may be able to "force" the blade to move a little. This may free it enough to work.
Posted on Jul 14, 2009
Tips for a great answer:
Jul 09, 2014 | Tanaka Hedge Trimmers: 20" Dual - Sided...
Jun 11, 2014 | Ryobi Factory-Reconditioned 30cc 18" Gas...
Apr 13, 2011 | Garden
Jul 31, 2010 | Tanaka 30" Double Sided 24cc Hedge Trimmer
Jul 27, 2010 | Ryobi 26CC, 22 In. Hedge Trimmer
Jul 03, 2010 | Craftsman 22" Gas Hedge Trimmer
Aug 27, 2008 | Electrolux Gas Hedge Trimmer
45 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: