Question about LG GE24NU40 External DVD-Writer - Retail Pack - DVD-RAM/R/RW Su

Open Question

*DVD player won't play or read the finalized disc I burned on the GE24NU40 of a home video,possibly because there is no name for the disc listed on the player's initial menu page , even though the project did have a name on my hard drive. The project appears to have burned and finalized fine on the DVD disc the LG external writer burned. I installed all the content from the enclosed CD prior to using the writer. I have tried using different DVD burning programs and the problem persists. I cannot playback any DVDs I have made on this unit so far? What is the problem?

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3 Answers

SOURCE: my lg GSA-H55N dvd writer is not playing Cds but plays Dvds fine

Drivers related to hl dt st dvd ram gsa h55n

Posted on Feb 13, 2009

techie2050
  • 126 Answers

SOURCE: my lg GSA-H55N dvd writer is not playing Cds but plays Dvds fine

your DVD ROM lens has became weak.
and it cannot be repaired.
But if you manage to open the DVD ROM clean the dust in it & it will start working again but be careful remember that no power should be attached to ROM.
or you can buy a lens cleaner from market and try that.
pls rate my solution
thankyou

Posted on Feb 17, 2009

NitrusInc
  • 326 Answers

SOURCE: HELP!!!!! : "Not found CD/DVD Writer driver"

This could be due to a common issue. I would suggest you try this method first.

The following is a link to the Microsoft documented solution for issues with DVD/CD drives, explaining a step-by-step procedure. In the event that the first process, which is automated labeled "Fix It" does not solve your problem, please continue to the end of the document.

http://support.microsoft.com/kb/314060

After completing this procedure, please let us know if you are still experiencing any issues by posting a comment. If this information was helpful, please take a moment to rate the solution. Thank you

Posted on May 17, 2009

Testimonial: "thanx"

njvinod
  • 1462 Answers

SOURCE: MY LG DVD WRITER READ CD AND DVDS BUT WHILE

Hi,

The same situatin occured to me once, try installing NERO by uninstalling and reinstalling it...try to install the version that came alomg with your writer.... Dont try any purayed version..sometimes it may not work

ENJOY! RATE THIS SOLUTION

RNJ VINOD KUMAR

Posted on Jul 04, 2009

  • 355 Answers

SOURCE: the LG 18x dvd writer does not read all dvds but

if it is comes under warrenty

Posted on Oct 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

DVD+R won't run on Sanyo DVW-6100


you need to burn the video on a memorex DVD-R disc and then it will play

Jan 20, 2013 | Sanyo DVW-6100 DVD Player/Video Cassette...

1 Answer

I HAVE BURNED A VIDEO TO A DISC BUT IT WILL NOT PLAY ON MY DVD PLAYER


It's possible that either the format of the disc or the format of the movie is incompatible with your DVD player. Not all players will play all of the disc formats, those being DVD+R, DVD-R, DVD+RW, DVD-RW. Check to make sure that you have used a format that is compatible with your player; your manual, or even the box the player came in should give you a list of what will work.

The other possibility is the format of the video. If you made an exact copy of a retail DVD it should work as long as the format of the disc is okay. If you used the .avi, .divx. .mkv, format or anything similar, then your player may not be capable of playing it. If you are able to play the video on your computer, but not on your player, then the format may be the issue. Most players capable of playing those types of formats will have the DIVX stamp on the player, usually on the front of the player.

The only other problem may be whether or not you finalized the disc itself. Some players will not play discs that have been left open for more additions.

Hopefully this information will help you to identify your issue. Please let me know if I can supply you with further information.

Feb 20, 2011 | Samsung Slim External DVD Writer Black ...

2 Answers

I burn dvd -r and dvd+r and it will not play on it


It is possible that the disks are not finalized. You may need to configure it to auto finalize, which is off by default. It would be impossible to have more than one title on a disk if you always auto finalized. Check your manual, and finalize your disks. Many times marginal disks will play OK in the unit they were recorded on, but not so well in other players. The media (disks) could be the problem as well. On a side note, the DR410 will NOT burn DL (dual layer) disks. I hope this helps and good luck.

Oct 28, 2009 | Toshiba DR410 DVD Recorder

2 Answers

Video copied to disk but cannot view on PC or other DVD players.


This is the unfortunate thing with copying DVD's. Unfortunately when a DVD is copied only certail players will play it back. I can burn a disk on my laptop and it will play fine in the laptop and on my Sony DVD player, but my Samsung will not read it. This is why when you burn DVD's it's important to find a brand that is read by numerous DVD players. Try using the Sony disks.

Hope this helps.

Nov 12, 2008 | Sanyo DRW-1000 DVD Recorder/VCR

1 Answer

A DVD burned with Studio 10.8 plays on our stand alone DVD player, but it won't play on our computer.


check what mode the cd video is you may have to burn another one with the correct mode for pc
Right click program on cd go to properties check video name plus what is after the . ie home.wmv as you need to burn cds with a general code
Try VLC Media Player on computer this plays all my video media

Jul 22, 2008 | Pinnacle Systems Studio AV/DV Version 9...

2 Answers

Player does not read dvd disc


You already clean the laser lens.

Jul 01, 2008 | Polaroid Televison & Video

1 Answer

Not recognizing DVD player


i would say for some reason your dvd player is not compatible from now on with that brand of blank dvd!


get the firmware update from the brand website all you do is download the file burnit on a cd and put it in the dvd player should fix most and eventual problems

Jan 14, 2008 | Panasonic DMR-EH75VS DVD Recorder/VCR/HDD...

1 Answer

Samsung R155 Recording from VHS Issues


The reason why you are having this problem is because you haven't finalized the disc. In able for you to play that Burned DVD that you have you need to Finalized the disc. Finalizing a recordable optical disc means writing the disc's lead-in (the Table of Contents or TOC) and lead-out information (blank data that fills up the unused space at the end of the disc) so that a DVD player will know where the various tracks begin and end. Without the TOC, a conventional DVD player will not be able to read the contents of the disc. Once the disc is finalized, no more information can be written to it. Finalizing takes about two or three minutes. To finalize a DVD-RW/DVD-R: 1. Press the Menu button with the disc stopped. 2. Select Disc Manager and press Enter or the right arrow. 3. Select Disc Finalize and press Enter or the right arrow. You will be asked twice if you are sure that you want to finalize the disc. Select Yes and press Enter. Once the disc is finalized, you cannot delete entries from the record list. After being finalized, the DVD-R/DVD-RW (video mode) operates in the same manner as a DVD-Video. Recorded discs must be finalized in order to play back in non-Samsung DVD players. A DVD-RW disc that has been recorded by DAO (disk-at-once mode) in a PC cannot be unfinalized. A DVD-RW disc that has been recorded in Video Mode on a non-Samsung recorder cannot be unfinalized by a Samsung recorder. A DVD-R disc cannot be unfinalized. Note: Finalization does not apply to DVD-RAM. If you cannot finalize a DVD-R or DVD-RW disc, make sure that Disc Protection is turned off. If you are still having difficulty, you may try calling technical support of SAMSUNG. Note: Do not turn the recorder off while it is finalizing the disc. Data on the disc will be damaged if the finalization process is interrupted.

Sep 17, 2007 | Samsung DVD-R155

1 Answer

Cd dvd wont play


Many of the older DVD and CD players will not play disks recorded on a computer. This has to do mainly with the laser optical response.

There were several manufactures that manufactured their laser unit with a built in filter that would not allow their player to read non pressed CD disks (disks burned with a home computer).

When buring DVD's or CD's, use the slowest possible speed for the burn to have the highest readablity and least data errors possible for the medium.


Jerry G.

Mar 09, 2007 | JVC KD-AVX1 Car DVD Player

Not finding what you are looking for?
LG GE24NU40 External DVD-Writer - Retail Pack - DVD-RAM/R/RW Su Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Michael Vincent Cruz

Level 3 Expert

868 Answers

Are you a LG Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...