Question about ViewSonic G810 21" SuperClear CRT Monitor

2 Answers

Monitor Menu Settings

My Monitor Menus is not working correctly. i can't set my monitor colors and can not set h-Size or V-Size of monitor screen. then monitor screen is not showing full screen picture.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 45 Answers
Re: Monitor Menu Settings

There is in the menu that calls for " RECALL ", press this to go to original setting, and change setting again to your choice, individually.

Posted on Oct 01, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 500 questions.

  • Expert
  • 556 Answers
Re: Monitor Menu Settings

Your all problem is due to setting only due to time controls get dirty from inside. please call some one to change menu control if required. as settings will be controlled from nenu only

Posted on Oct 01, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Explain how the monitor buttons work

Monitor Icon Description of icon function moncont.gif Power - Turns the monitor on or off.
Brightness - Using this button or wheel the user can increase and decrease the brightness on the screen.
Contrast - Using this button or wheel can increase and decrease the amount of contrast on the screen.
Horizontal Size - Allows for the picture on the screen to be stretched to the horizontal edge of the monitor.
Vertical Size - Allows the picture on the screen to be stretched to the vertical edges of the monitor.
Horizontal Position - Allows the picture to move moved horizontally, once in the center the user can then use the Horizontal size to stretch it to have an equal amount of black border on each side.
Vertical Position - Like the Horizontal Position, using this button or wheel the user can move the picture up or down to center the picture more appropriately.
Full Screen - Sets monitor to full screen.
Degauss - This button will degauss the CRT, restoring possible color impurities. After this button has been pressed the degaussing circuit will be activated and then deactivated after a few seconds. Pressing and holding this button for a few seconds may cause your computer monitor to reset all data.
Corner and Trapezoid Correction - Using this button or wheel the user can either round the edges of the picture or move the picture inward like an hour glass or outwards.
Vertical Linearity - Sets the width of the vertical lines.
Moire - Removes or reduces the Moire effect, if any.
OSD Controls - If the monitor contains OSD controls, allows for the OSD menus to be adjusted.
Power Management - Allows the user to define the power management settings through the monitor itself and not the software.
Monitor Status - Displays the current monitor settings such as refresh rate and other settings.
Language - Sets the language on the monitor.

Aug 16, 2014 | Computer Monitors

1 Answer

Why my monitor screens is color green

Your RGB settings has most likely been altered, resulting in some problems. Check your settings menu on the monitor itself and reset the settings to default. If that is not the problem, it's probably the computer's settings that has caused this change. You will need to go to the computers monitor settings and reset that to default to get back to normal colours.

Nov 04, 2012 | Samsung SyncMaster 915N 19" Flat Panel LCD...

1 Answer


    • 1 Push the "Menu" button on the front or side of your Dell monitor. The button's icon resembles a miniature monitor. This will open the main monitor setting menu. Push the button again to exit the main menu and open the OSD menu.
    • 2 Push the "Down Arrow" button on the monitor to scroll through the OSD menu. Stop at "Factory Reset." Push the "Menu" button to open the factory reset menu.
    • 3 Push the "Down Arrow" button to select "Position Settings Only" to reset the monitor's horizontal and vertical screen settings. Press the "Menu" button to activate the setting changes.
    • 4 Push the "Down Arrow" button to select "Color Settings Only" to reset the monitor's red, blue and green color settings. Press the "Menu" button to activate the setting changes.
    • 5 Push the "Down Arrow" button to select "All Settings" to restore the monitor to its original factory settings. Press the "Menu" button to activate the setting changes.
    • 6 Push the "Up Arrow" button to select "Exit" to leave the monitor reset menu. Press the "Menu" button to exit the OSD menu. Push the "Menu" button again to exit the main settings menu.

Aug 02, 2012 | Dell Computer Monitors

1 Answer

Unable to adjust the settings for brightness and contrast .

To adjust the display settings:

1. Press the flywheel control. The main menu appears.

The current display settings appear across the top of the main menu.

2. Rotate the flywheel to highlight an option. The name of the
highlighted option appears in the center of the menu.

3. Press the flywheel control to select the highlighted option, then
rotate the flywheel to adjust it.

Some options can only be enabled or disabled. There are also some
options that contain additional menus.

4. Repeat Steps 2 and 3 until you have made all your changes.

5. Rotate the flywheel control until Exit is highlighted, then press
it to exit the OSD control system.


Contrast increases or decreases display image contrast.

Brightness increases or decreases display image brightness.

Horizontal Size increases or decreases the width of the display image.

Horizontal Position moves display image to the left or right side of
the screen.

Vertical Size increases or decreases the height of the display image.

Vertical Position moves display image to the top or bottom of the

Pincushion curves the sides of the display image inward or outward.

Trapezoid increases or decreases the trapezoid distortion of the
display image.

Degauss removes magnetic discoloration from the display image.

Recall returns most options to the original factory default settings
if the monitor is currently using a preset video mode. (See the “Video
modes” section in this guide for information about the factory preset

Advanced Option opens the Advanced Option menu. Color opens the Color
Manager menu.

Language changes the display language for the OSD control system.

User displays information about the monitor’s preset modes.

OSD Manager moves the OSD control window on the screen.

Exit closes OSD control system.

Jun 21, 2010 | Gateway EV 910 19" CRT Monitor

1 Answer

Need to get screen size to show all . cant see

Things to check: Are your display settings set to "native resolution" of your screen. The native resolution is the actual dimensions (in pixels) of your flat-panel screen.
Looks like the Dell E153FP 15" has a native resolution of 1024x768. In windows, go to your control panel, in display settings, and ensure the resolution is set to 1024x768.
If that does not work, you can try the "auto adjust" feature on the monitor. On many Dell monitors, you can get this by pressing and holding the + button (on the monitor). You'll see the words "auto-adjust" appear on the screen if this works. If that doesn't work, you may be able to find auto adjust by navigating the menues in your monitor's menu, which you can get to by pressing the "menu" button on your monitor (sometimes this looks like a little rectangle icon). If it's an alignment problem, this should fix it right away.
If neither of the above work, it's probably your video card. Make sure your video card drivers are the correct ones for your card and OS, and up to date. You can also mess with display options under Control Panel > Display, under the "settings" tab, and at the bottom click the "Advanced" button, and it will bring up the advanced settings for your videocard.
Good luck!

Apr 23, 2010 | Dell E153FP 15" LCD Monitor

2 Answers

My monotor its all black but u can

This should be an (LCD) screen. They are the ones that usually have this kind of problem. You will need to take it to have it checked if the problem is the VGA signal cable leading to the monitor. They will check if it is properly connected or has gone bad. It is very unlikely that the screen is bad. When this VGA signal cable goes bad it could result in a totally blank screen.

Sep 13, 2009 | Dell Computer Monitors

2 Answers

Viewsonic VP930b color problem - Red tint

Go to the setup menu on the LCD panel by pressing button 1 on the front. See if there is an option to reset the lcd to factory settings. Reset it and report if it helps not.

Jul 29, 2009 | ViewSonic VP930b 19" LCD Monitor

2 Answers

Color on monitor

First, have you degaussed the unit to stop any magnetic interference?

Do you use software to change monitor settings or do you use the on screen display menu on the monitor?

Most lcd's have a button for menu on the lcd. This can be used to adjust color, contrast, brightness, degauss, as well as screen position and size.

Mar 06, 2008 | E-Machines eMachines Monitor E15T4

1 Answer


Try pressing the menu button and holding for 15 seconds or more. I have heard this will unlock most locked menus.

Oct 02, 2007 | Philips 107E56 17" CRT Monitor

1 Answer

Monitor Menu Settings

if you have hair dryer just give little bit of heat on the panel button and make sure your monitor is complete off. see if it help otherwise give for repairing. bye

Sep 25, 2007 | SAMTRON 55V 15" CRT Monitor

Not finding what you are looking for?
ViewSonic G810 21" SuperClear CRT Monitor Logo

Related Topics:

843 people viewed this question

Ask a Question

Usually answered in minutes!

Top ViewSonic Computer Monitors Experts


Level 3 Expert

18258 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a ViewSonic Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides