Question about Sony KV-32FS12 32" TV

1 Answer

Sony KV-32FS12 Component Video 4 Has A Wavy Picture

Hooking up an iPod component AV Cable to the Y,Pb and Pr rear ports of my KV-32FS12 (video 4) to view iPod videos on our TV and the video image is wavy and unwatchable.  This is the second cable from Apple (same issue with the first).  
Is there a menu setting on the Sony to clean up this component image?
Plan B will be to replace the apple component AV cable with their composite AV cable.  
Any help getting the component AV cable working with our Sony KV-32FS 12 would be appreciated.
Thank, -Ken

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Sounds to me like the differnence between watchiing in progressive and interlace. these older tube tv's are not capable of displaying a progressive scanned image. like the first dvd players. check your video out settings on your ipod to make sure its an interlace output.

Posted on May 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sony bravia troubleshooting


Several possibilities here. First thing I'd try is replacing the HDMI cable. (They definitely do go bad). Second possibility is a problem with the cable box. HDMI outputs on these can fail too. If you have a set of "Component Video" cables (Pr/Py/Pb) try hooking up using those (you'll have to choose a different input on the Bravia). Good luck!

Jan 26, 2014 | Televison & Video

1 Answer

Samsung is only in black and white with av cables


It sounds like you connected a regular yellow composite video cable to the green luma (Y) port of a component video connection, this will give you just a black and white image because the red (Pr/Cr) and blue (Pb/Cb) ports and cables carry the color information.

Jan 30, 2012 | Samsung Televison & Video

3 Answers

I've tried connecting a Sony DVD player to my TV using Pb Pr V cables. I get a picture, but no sound.


The cable u are using it is the S-video cable?Yes,this cable dosen't support audio.Must used a RCA component cable like R,W cable connected between the tv and the DVD player to get sound.

Mar 14, 2011 | Sony BRAVIA KDL-40V2500 40 in. LCD HDTV

5 Answers

Y/Pb/Pr outputs are green; needs


There is no calibration for the component video that I know of, check your cables you may have a bad Pr cable or the Pr/Pb ones may be mixed up.

Y (the green one) is for luminance, plug in ONLY this connector and you should see a black and white picture.

Now connect the Pr. You will now see red tones.

Now connect the Pb. And you will see blue tones.

Reverse the Pr and Pb and see what happens.

Oh and make sure you don't accidently have one plugged into a composite video or digital audio port.

Still not looking right?

Go into the input menu of the TV and change the component (or colourstream) input from RGB to Y/Pr/Pb. (most TVs do not have this feature.

Hope this helps!

Jan 24, 2010 | Samsung SIR-TS360 DirecTV DTV Receiver

1 Answer

Sound but no picture on PS3 using AV3/4


the best configuration is using component AudioVideo cable.component video out from ps3 use 3 wires going to component video input to your tv (Y-Pb-Pr) and two wires for audio left.right. use av1 input on your tv to hook the audio and video. let me know if you still have issue.

Apr 05, 2009 | Philips Televison & Video

1 Answer

Connecting tv to surround sound


Look at the back side of the TV .
There will be [more than one] composite video in & out
How composite video port looks like typical 3 RCA jacks - std color of ports are Red, White & Yellow. The yellow one is the one - which carries video signal. You can connect - a RCA cable from output of SC-HT730 [yellow] to back of TV.

Most probably there will be at least one Component video behond your TV set [ if the set is HD Ready one] - in other words, If your TV supports component in.
Component Video ports are namsed as Y Pb Pr - if you have so, connect output from SC-HT370 to back of TV.

Recommendation: choose component video - if that is supported in both. That gives much better picture quality.

Dec 16, 2008 | Panasonic SC-HT730 System

1 Answer

Which component cables to use


the cables are fine labeled as they are you notice cr =pr, cb=pb and y is still y
the cables are fine and will deliver up to 1080I capabilities

Dec 09, 2008 | Sony BRAVIA KDL-40V2500 40 in. LCD HDTV

1 Answer

Monster Component Cable labled Y/Cb/CR to TV that has Input Y/Pb/Pr


Y PB PR is the analog version of the Y CB CR color space; the two are numerically equivalent, but Y PB PR is designed for use in analog systems whereas Y CB CR is intended for digital video.

Aug 31, 2008 | Televison & Video

2 Answers

Mitsubishi WT-46809 Problem getting HD from DirecTV


I have the same exact problem. Same model, etc. Is there a resolution?

Sep 16, 2006 | Mitsubishi WT-46809 46" Rear Projection...

Not finding what you are looking for?
Sony KV-32FS12 32" TV Logo

274 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

73698 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...