Question about Acer AL1916W 19" LCD Monitor

2 Answers

NO PICTURE My monitor went black. I booted the computer and it didn't help. I rebooted the computer and I unpugged the monitor and turned the computer back on and plugged the power to the monitor back on again and it didn't help. Please Help!

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Please check the cable or the wire maybe there is the problem with it okay or check the information of required electriciy or voltage for it okay

Posted on Oct 25, 2007

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Acer Master
  • 2,022 Answers

See there is power in monitor and check also that your monitor is getting signal from cpu just remove the data vga data cable from cpu and see is it showing any massage on screen like check signal or any other massage. and check your keybord also by pressing num lock key see the light is on and aoff when you pressing the num lock button . if nothing is happen that mean your monitor is not getting signal from cpu and it is not monitor problem . bye

Posted on Sep 25, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Monitor goes black seconds after showing desktop


Does your monitor go black because it went to sleep, does it turn off? Do you have any lights on the monitor to indicate what it is doing?

Also I would boot into safe made by rebooting the computer & tapping F8 when the bios appears. You should be prompted with several options, one of which is "Safe Mode". Choose this & report how the monitor behaves.

Jul 24, 2012 | Acer X193W LCD Monitor

1 Answer

My hdtv just went black. my cable is on and all connections are good. The green on light is lit but no picture.


Try unpugging the HD cable box "from the world"...unplug power cord, cable tv coax, cat5 cable to router etc, EVERYTHING. Wait 1/2 minute and plug everything back in. The cable box will reboot. Try that but can't promise that will work for sure.

Jul 29, 2011 | Televison & Video

1 Answer

Monitor is black


Try booting in safe mode per instructions here: http://www.fixya.com/support/r4873371-fixing_out_range_format_not_supported

You need to find out if the proper video card driver is installed when you use recovery disk. Compaq usually supply separate disk for the drivers.
Try using resolution of 1024x 768 @60 Hz first and go up from there.
http://s807.photobucket.com/home/budm/allalbums
http://en.wikipedia.org/wiki/Capacitor_plague
http://www.badcaps.net

Jun 04, 2010 | Kogi l7eh-ta ko 17" Flat Panel LCD Monitor

1 Answer

Desktop monitor went black & and wil not power up


Try the fuse on the monitor power cord, and if this does not cure, you will have to get another monitor....pretty good prices on ebay!

Jan 04, 2010 | Computers & Internet

1 Answer

Desktop PC monitor suddenly went black & power light went off


1 either ur VGA card is corrupted or
2 RAM is corrupted
3 Last may be your motherboard is gone - not sure

Jan 04, 2010 | Computers & Internet

1 Answer

Monitor went black after changing resolution


Reboot you computer and spam F8 until you get the option to boot in safe mode then choose VGA safe mode or safe mode with network is fine also and change the resolution back

Jan 30, 2009 | Samsung 793S 17" CRT Monitor

1 Answer

Hanns g JC199D will not turn on, comp is on, try to turn monitor


no signal indicates a couple things... i suspect your computer isn't even booting up. reboot the computer while tapping the F8 key.... you should see writing on the screen... boot to safe mode. after it sucessfully boots up... reboot again... should be fine.

Robert

also is that an add on video card ?

Dec 18, 2008 | Hanns.G Corporation JW-199DPB 19" LCD...

2 Answers

Monitor will not turn on at all


may be the crt tube inside your monitor s got crashed.. just check it once

Feb 19, 2008 | HP vs17

Not finding what you are looking for?
Acer AL1916W 19" LCD Monitor Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Mohammed Ebrahim M
Mohammed Ebrahim M

Level 3 Expert

644 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you an Acer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...