Question about Brother BRTPT65 PT-65 Label Maker Printer

2 Answers

How do i load tape in pt 65? - Brother BRTPT65 PT-65 Label Maker Printer

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Remove back cover by pressing down on dots. Make sure you have the correct size replacement (they start with an M and are 9mm or 12mm).
Put the side of the tape that has the open V in it over the silver metal holder in the PT65. Snap the left side of the cartridge in. This should line up the black roller with the exposed part of the tape.
Snap the lid back on and turn on the unit. Hold the CODE button and press the space bar so some of the tape feeds out of the top.

Posted on Aug 22, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Make sure the tape runs through the tape guides on the cartridge, took me a while to figure that one out!

Posted on Aug 23, 2011

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 566 Answers

SOURCE: How do I load the tape into my Brother PT 65

Download the manual for instructions and images of how to change the tape cassette (this should be a simple operation, unless something is wrong with your machine):
http://pub.brother.com/pub/com/ptouch-pdf/UM_PT65.pdf

For FAQs and troubleshooting:
http://welcome.solutions.brother.com/bsc/public/us/us/en/model_top/p-touch/65eus.html?reg=us&c=us&lang=en&prod=65eus

Posted on Aug 03, 2009

komguy
  • 2306 Answers

SOURCE: Tape on Brother PT-65 wraps on roller

If the end is already messed up you may need a new cartridge, if you can remove the tape and feed the end under the guide on the cartridge and re-install it should work properly again.

Posted on Sep 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

P-Touch Model PT-65 Home and Hobby Label Maker - Loaded a new cartridge and it will not feed through


Sir/Madam

Its Very Easy To Fix This Issue,Just Follow Few Simple Step and You Solve Your Problem By Your Own,

Read Below Instruction,

1Turn off the label maker before installing the tape.
2Press the part marked as "<<" and lift the cassette cover.
3 Position the tape into the slot. Make sure to feed the end of the tape under the tape guides.
4Check that the lever is up before closing the cover; the cover will not close if the lever is pressed down.
5Close the cassette cover.
6 Press the power key to turn on the device. If using an AC adapter, plug the adapter into the wall then press the power key.
7Type a sample to test if your installation was successful.

Read more: http://www.ehow.com/how_7526530_install-tape-ptouch-label-maker.html#ixzz2pMqUU0oU

Jan 02, 2014 | Brother BRTPT65 PT-65 Label Maker Printer

1 Answer

Tape on Brother PT-65 wraps on roller


If the end is already messed up you may need a new cartridge, if you can remove the tape and feed the end under the guide on the cartridge and re-install it should work properly again.

Sep 15, 2009 | Brother PT-65 Personal P-Touch Electronic...

1 Answer

How to load the tape in the label maker


www.ptouchdirect.com/ptouch/umpt65.html - 30k -

Feb 25, 2009 | Brother BRTPT65 PT-65 Label Maker Printer

1 Answer

How and where do I feed new labels


press and hold the code button and press the "space button" this will feed the tape

Feb 18, 2009 | Brother BRTPT65 PT-65 Label Maker Printer

1 Answer

Ink will not print


www.ptouchdirect.com/ptouch/umpt65.html
this is a web page with the manual should help

Dec 09, 2008 | Brother BRTPT65 PT-65 Label Maker Printer

1 Answer

Need help loading cartridge for brother label maker


when you have the label maker upside down...
place the cartridge so the WHITE 12mm ect sign is on top.
pull the tape out a bit and pull it up so that it stick out where the tape would print out of.
place the cover back on tightly and turn on..
push CODE, SPACE, it will feed though and you'll be all set.

Dec 08, 2008 | Brother BRTPT65 PT-65 Label Maker Printer

3 Answers

Change cartridge Problem - Brother BRTPT65 P-Touch Model PT-65 Home and Hobby Label Maker Printer


Once you snap in the catridge you have to put the back of the p-touch back on. After that you can feed through the tape by pressing Code Space. If the back of your P-touch is not on it will not advance through.... I learned the hard way :) Hope it helps you all.

Jul 11, 2008 | Brother BRTPT65 PT-65 Label Maker Printer

1 Answer

Labeling system trouble-shooting


This is a duplicate post, click on the following like for the original: http://www.fixya.com/support/t133614-labeling_system_trouble_shooting

Feb 10, 2007 | Brother PT-65 Personal P-Touch Electronic...

Not finding what you are looking for?
Brother BRTPT65 PT-65 Label Maker Printer Logo

1,587 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

James Cagle
James Cagle

Level 2 Expert

453 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...