Question about Amana ALG331RAW Gas Dryer
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Amana Dryer
sounds like a bad motor or something stuck in blower fan.. see if you can maually turn the drier drum if so motor is bad if not something is binding up drum or blower fan.
Posted on Nov 04, 2007
SOURCE: Amana dryer
Check your fuses or breaker. An electric dryer requires 240 volts to operate. In a fuse box system, 2-30 amp fuses are required for an electric dryer to operate. If 1 fuse is blown it will not start or heat depending on which fuse is blown.
In a breaker system the breaker can trip and sometimes look ok. Find your 30 amp dryer breaker and reset it by flipping the lever to off, then back on.
If this doesn't help, you may have a faulty door switch or maybe your door has loosened from the hinges and has sagged a bit, breaking contact with the door switch plunger.
If you can locate the door switch, push on the plunger... you should hear an audible click...if you do then the door switch is normally ok, but not always, it is just a simple test to rule a bad switch which is normally silent if it is faulty.
You may want to inspect for a burned wire or wire termination.
Make sure dryer is unplugged from the power source before inspecting!!!
Other than the previous instructions, it is difficult for a novice to diagnose the problem...call a technician in to fix your dryer.
1 more thing, Just because a breaker appears to be on, and/or you flipped it off then on, doesn't mean the breaker is ok. Fuses also can look good and be bad. A small volt-ohm meter($10.00) is a good investment for testing voltage, and to save time and money.
Hope this gets you up and running.
Posted on May 26, 2008
Sounds like the timer is going bad and it needs to be replaced. The time is located behind the knobs.
IF my answer has satisfied you please rate. Thank you
Posted on Feb 12, 2009
SOURCE: gas dryer won't start
REMOVE YOUR ACCESS PANEL AND SEE IF YOU HAVE A BROKEN BELT IF NOT REPOST. ACCESS PANEL LOOKS LIKE IT COMES OF BY 2 SCREWS AND RAISING IT UP AND OFF.
Posted on Apr 17, 2009
The drive motor starting capacitor is likely dead. This can be tested if you are competent enough to take the thing apart and use an electronic multimeter. Otherwise it is a cheap part to replace, depending on how much the repair guy charges for labor and to be called out.
Posted on Dec 09, 2009
Tips for a great answer:
Aug 15, 2010 | Amana NDE2330AY Electric Dryer
Jul 23, 2010 | Amana ALG643RB Gas Dryer
Jan 26, 2010 | Amana DLG330RAW Gas Dryer
Aug 01, 2009 | Amana NDE2330AY Electric Dryer
Apr 02, 2009 | Whirlpool LGV4634JQ Gas Dryer
Mar 18, 2009 | Amana NDG5800 Gas Dryer
73 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: