Question about Dryers

Open Question

Keep getting a d90 code and dryer stops - Dryers

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 55 Answers

SOURCE: I have an LG Dryer and keep getting a error message D90 after running for about 10 minutes

Hello,
D90 means the dryer thinks the vent duct is 90% blocked. Be sure the vent hose is not kinked behind the dryer. I've even disconnected the hose from the dryer and hooked up my leaf blower to blow out the vent as it develops more air pressure than the dryer does.
Here's a great video describing the error code: https://youtu.be/yL7Oq4lCadw
Good luck. Hope this helps.
John

Posted on Mar 22, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an LG Dryer and keep getting a error message D90 after running for about 10 minutes


Hello,
D90 means the dryer thinks the vent duct is 90% blocked. Be sure the vent hose is not kinked behind the dryer. I've even disconnected the hose from the dryer and hooked up my leaf blower to blow out the vent as it develops more air pressure than the dryer does.
Here's a great video describing the error code: https://youtu.be/yL7Oq4lCadw
Good luck. Hope this helps.
John

Mar 22, 2015 | LG Dryers

1 Answer

Why does DLE4870W dryer keeps stopping with d90 error. but their is no blockage of air flow.


Check the link first before going forward!
The next step is more involved and you may want to call for service. Normally you will find a wiring diagram attached to the dryer, take a look underneath or some are found by removing the back cover. Take a look at the wiring diagram to see if there is a temperature duct sensor wired in, I would suggest changing the senor, but only after you check the link and call the support center found at the link!
Looking for Answers about LG Electronics DLE4870W

Nov 29, 2014 | Dryers

1 Answer

Why wont my tablet stop buffering?


Keep pressed the switch button for 30 seconds and it will restart.

Nov 04, 2014 | Lowepro Stealth Reporter D200 AW Shoulder...

1 Answer

Lg dryer error codes


Duct is plugged it is heating up. the vent needs to be cleaned.

Oct 12, 2013 | Dryers

1 Answer

"error code" r33


Is this keeping you from shooting? Normally this is an informational message telling you how many more shots you can take in the current burst before the buffer fills up and the camera has to stop shooting and write to the memory card.

Sep 09, 2013 | Nikon D90 Digital Camera with 18-105mm...

1 Answer

I'm getting a r16 error on my D90


The "r16" in the display is not an error code. It is simply informing you of the number of exposures that can be held in the camera's internal high speed memory before shooting would have to stop while the D90 transfers the pictures to the memory card. If you held the shutter release, you could watch the r16 value decilne by one for each exposure (r15, r14, r13, etc.).

Page 256 of the D90 User's manual indeed shows the Err error code, and defines it as a "Camera Malfunction", "Release shutter. If error persists or appears frequently, consult Nikon-authorized service representative." The "err" error code is a generic error. The camera has detected a problem, but it doesn't know exacly what, similiar to the fEE code. The "err" code could be camera / lens contacts or it could be a circuit board or even shutter failure. You've already tried the common contact cleaning fix (that never seems to solve the problem) without any luck, so you might have to call Nikon Support and arrange for service.

Good luck!

Jan 31, 2013 | Nikon D90 Digital Camera with 18-105mm...

1 Answer

Nikon D90,,,brandnew..the LCD screen flickers when recording a movie and when playback pictures they first come up a little blurry and then when they come to sharp focus the picture shrinks slightly....do...


Hello,

The D90 movie mode is not perfect.
Keep the camera steady when shooting movies to reduce flicker.

It sound like you are not in focus when you start recording the movie. Press the shutter button halfway to focus, then press ok to record.
If you do not want the camera to change focus in shot keep the shutter halfway down.

I hope this helps.

Mar 10, 2010 | Nikon D90 Digital Camera with 18-105mm...

1 Answer

I keep getting a E9E error code on my Fridgidaire gas dryer. It starts, then stops and flashes the code


this is a line voltage error code press the cancel button for three seconds check you power and make sure the power supplied is correct.

Sep 12, 2009 | Frigidaire Dryers

2 Answers

During using D90 for son's b-day my camera kept freezing up and giving a code of r05 and another code once that I don't remember. Why and what does r05 mean? I even turned the camera off at times but it...


The r05 is not an error. It's simply telling you that the buffer has room for five more pics. It's only a problem when it gets to 0 and stays there.

As to the other error, I'm afraid I can't help you there.

Jul 10, 2009 | Nikon D90 Digital Camera with 18-105mm...

Not finding what you are looking for?
Dryers Logo

Related Topics:

168 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...