Question about Pride Jazzy 1113 ATS Indoor Power Wheelchair

1 Answer

Pride z-chair vsi controller battery condition lights don't turn off

Posted by on

  • Ralph Alcorn
    Ralph Alcorn Oct 12, 2013

    Thought I was just entering a title for my post. Here is the full post:

  • Ralph Alcorn
    Ralph Alcorn Oct 12, 2013

    The controller is labeled D50683.01 CTLDC 1414 AP07010399 This is my 102 year old mother in law's chair. She and the staff at her facility say that it runs out of charge too soon. When I look at it and test it, it appears to be normal, with one exception: The 10 light battery condition row of lights does not turn off. When fully charged, they are all on solid. The 4 light row of lights underneath the battery lights go on with the power on button, and off when it is turned off. However, as long as the chair battery is in place, the 10 lights are on. I think when she first got the chair, hitting the off button turned off all the lights. Is this correct, or is the controller operating normally? (The service technician we called to inspect the chair didn't know if the lights should turn off or not. He did replace the batteries and said next step would be to replace the controller.)

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 105 Answers

They wont as long as its turned on, sounds like he is fishing,and is not qualified or he would have a programmer for that chair and he could check error codes and tell u exactly what is wrong,call the dealer for a more exsperienced tech and give model of chair and request he have a programmer for that model power chair okif he comes without that ptogrammer send him back and dont pay him

Posted on Jan 20, 2014

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 175 Answers

SOURCE: I need a used/remanufactured 50 Amp VSI Controller

Search ebay, you'll find them new and used, and make sure that the connection into the chair matches up with your chair...most will send you a picture of it, and also make sure that the controller is programmed for RWD (Rear Wheel Drive), or you will also need to get a PP1 programmer to reset it for your chair. If it came off of any RWD chair and the connections are the same, it will work on your GO-GO.

Posted on Jan 08, 2010

  • 31 Answers

SOURCE: My Pride Go Chair battery appears to discharge

Yes prob one of the batteries are bad, but you may want to replace both.

Posted on Jun 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My chair is blinking 4 times and I do not have a manual


If it is a Pride Jazzy or similar, the Diagnostic Flash Codes are in this PDF file.

PDF]INFINFB2048_Jazzy_Select_14_Troubleshooting ... - Pride Mobility www.pridemobility.com/download.php?f=troubleshooting/INFINFB2048_Jazzy...
  1. Cached
  2. Similar
basic troubleshooting instructions for the Jazzy Select 14/14XL power chairs. ... on my Jazzy Select 14/14XL seem to be "dead" (controller does not light up when .... What if the left red battery condition meter LED on the VR2 or VSI is flashing? chair is blinking 4 times Google Search

Nov 15, 2016 | Health & Beauty

Tip

UnLocking Sleep and Lock Modes for Pride and Invacare power chairs


<p><b><span>Pride Joysticks and others that use VSI joysticks</SPAN></B><br><p><b><span>SLEEP MODE</SPAN></B><br><p><span>Your VSI controller has a sleep mode feature. Sleep mode is a built-in circuit </SPAN><span>that automatically shuts off the main power if the joystick is not moved </SPAN><span>in any direction for a period of time predetermined by controller program.</SPAN><br><p><span><b>The battery condition meter lights on the keypad indicate sleep mode by </b></SPAN><span><b>blinking once every five seconds.</b> To restore power and continue, push the </SPAN><span>on/off key twice.</SPAN><br><p><span> </SPAN><br><p><b><span>Lock Mode</SPAN></B><br><p><b><span>To unlock the VSI:</SPAN></B><br><p><span>1. Press the on/off key and power on the VSI. <b>The maximum speed/profile </b></SPAN><span><b>indicator should ripple side to side</b>.</SPAN><br><p><span>2. Push the joystick to the full forward position until the VSI beeps.</SPAN><br><p><span>3. Pull the joystick to the full rearward position until the VSI beeps.</SPAN><br><p><span>4. Release the joystick. There should be a long beep.</SPAN><br><p><span>5. The VSI is now unlocked.</SPAN><br><p><span> </SPAN><br><p><i><span>Invacare and others that use SPJ+ joysticks</SPAN></I><br><p><i><span></SPAN></I><i><span>FOR SPJ+ Joysticks</SPAN></I><br><p><i><span><b>Lock Mode will be indicated by all LEDs</b></SPAN></I><br><p><i><span><b>flashing briefly and the information gauge</b></SPAN></I><br><p><i><span><b>LEDs chasing slowly from right to left</b>. If</SPAN></I><br><p><i><span>this occurs, press the horn button two times</SPAN></I><br><p><i><span>within ten seconds to unlock the joystick.</SPAN></I><span></SPAN>

on Nov 16, 2010 | Health & Beauty

1 Answer

What is the fix for Pride power chair code 3101 bridge voltage fault?


The fix for this fault is to replace the chip in the VSI controller. This happens when you consistently drive the power chair with weak or low voltage batteries.

Sep 02, 2014 | Pride Mobility Products New Pride Mobility...

1 Answer

1170XL Plus Pride wheel chair problems, VSI shows full charge, and gets hot after a few hours


Medicare should be able to help you locate a service center. The controller has some electronics that may have been damaged by the rain. It needs to be tested for sure.

Jul 29, 2014 | Pride Health & Beauty

1 Answer

How do you reset the chair when all the lights are flashing?


Hand control is locked. turn chair on push joy stick forward til it beeps then pull it back until it beeps then put it in neutral ( joy stick in the center) then it should be unlocked.
LOCKING/UNLOCKING THE VSI
The VSI has a feature that enables you to lock your power chair to prevent
unauthorized use.
To lock the VSI:
1. With the VSI powered on, press and hold the on/off key. After one (1)
second, the VSI should beep.
2. Release the on/off key.
3. Push the joystick to the full forward position until the VSI beeps.
4. Pull the joystick to the full rearward position until the VSI beeps.
5. Release the joystick. There should be a long beep.
6. The VSI is now locked.
To unlock the VSI:
1. Press the on/off key and power on the VSI. The maximum speed/profile
indicator should ripple side to side.

May 30, 2014 | Pride Jazzy 1103 Ultra Standard Power...

1 Answer

Jet 7 vsi controller shows no green lights, nothing flashing?


Make sure the controller cable is fully seated in the chair. The service manual from Pride's website will have detailed information in it. You can freely download it.

Mar 23, 2014 | Pride Jazzy 1103 Ultra Standard Power...

1 Answer

My power chair got wet in rain and won't start and lights olny flashing and what is meaning of vsi? how to ftx problem..please help!


VSI is the controller under the joy stick. Water will ruin the electronic circuits . The controller is expensive new. You can find rebuilt ones cheaper or can have yours rebuilt. Check your local mobility service shop or on line repair facilities.

Oct 12, 2012 | Pride Go Chair Travel Power Chair

1 Answer

Forgot how to unlock power chair


This is the procedure to unlock the controller on a Pride Jazzy:

Locking/Unlocking the VSI

The VSI has a feature that enables you to

lock your power chair to prevent unauthorized use.

To lock the VSI:

1. With the VSI switched on, press and hold the on/off key. After 1 second, the VSI should beep.

2. Release the on/off key.

3. Push the joystick to the full forward position until the VSI beeps.

4. Pull the joystick to the full rearward position until the VSI beeps.

5. Release the joystick. There should be a long beep.

6. The VSI is now locked.

To unlock the VSI:

1. Press the on/off key and power on the VSI. The maximum speed/profile indicator should ripple up and down.

2. Push the joystick to the full forward position until the VSI beeps.

3. Pull the joystick to the full rearward position until the VSI beeps.

4. Release the joystick. There should be a long beep.

5. The VSI is now unlocked.
NOTE: If the above procedure fails to either lock or unlock the VSI, contact your authorized Pride Provider.

Jun 30, 2012 | Pride Jazzy Select 6 Indoor Power...

1 Answer

The chair is locked. I had this happen a long time ago and I needed to move the joy stick diferent directions to get it unlocked but I do not remember how. It is a Jazzy 1113.


If it is the older VSI controller, turn on chair. as the battery lights scroll, hold the joystick in the (UP) position until you hear a beep. Then immediately place the joystick in the (down) position until you hear a beep. then place the joystick in center position, once you hear the beep for the final time, it should be unlocked.

If you have a Dynamic controller, turn on chair then press the horn button to unlock.

Sep 15, 2011 | Pride Jazzy 1113 ATS Indoor Power...

1 Answer

I have a Pride 1143 Jazzy Electric wheel chair and the controller is constantly flashing. This happened after I drove into my van and locked into the e-zloc. My husband sid I drove in too fast and caused...


Hi

Rapid flash of lights indicates a fault in the VSI or the electrical system. You need to refer to " VSI Error Codes" on page#32 of this User Manual:

Pride 1143 Jazzy Electric wheel chair User Manual

Please do accept the solution if the issue is resolved or else revert for further assistance.

Thanks
Rylee

Jul 25, 2009 | Select Jazzy Used Electric Wheelchair

Not finding what you are looking for?
Pride Jazzy 1113 ATS Indoor Power Wheelchair Logo

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pride Health & Beauty Experts

Robin Hill
Robin Hill

Level 3 Expert

1263 Answers

wcdoc1953
wcdoc1953

Level 2 Expert

280 Answers

Colin Taylor

Level 2 Expert

346 Answers

Are you a Pride Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...