Question about Mitsubishi VS-50607 50" Rear Projection Television

1 Answer

Mitsubishi VS-50607 Won't Turn On

I have a Mitsubishi VS-50607 Serial # 101570 and the green light turns on for three seconds I hear a click then the light goes out. Any thoughts on what might be wrong?

Posted by on

  • 1 more comment 
  • corell Nov 02, 2007

    I'm having the same problem. I did the self-diagnosis and the results were 2-4 blinks. Now my question is what do i do to fix it or better yet what part i need. Thank you

  • weezey_swens Mar 14, 2009

    I'm also having the same problem. The green light flashes, has no picture or sound, then clicks and shuts off. Same Model Mitsubishi VS 50607.

  • Anonymous Mar 27, 2014

    Turns on then green light goes on then turns off the tv

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,153 Answers

This model is equipped with a self-diagnosis feature to help with diagnosis of shutdown problems. To activate this turn the unit on let it shutdown then press the input/device and menu buttons on the front panel simultaneously and hold them in for 5 seconds after 5 seconds the power LED on the front panel will blink a two digit sequence. This will be one set of blinks a short pause then another set of blinks, this will repeat 5 times. 1 - 2 = no error detected 2 - 1 = X-ray protect (high voltage or beam current) 2 - 2 = Short protect (short protect monitors low voltage supplies) 2 - 3 = Deflection protect (this could be loss of vertical or horizontal deflection) 2 - 4 = Vertical protect (usually loss of vertical from the source.

Posted on Oct 06, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What do I need to fix my mitsubishi TV that has a 2-4 error code (vertical protect)???


I had three tv's VS-50607,VS-50605, same problem.I called Mitsubishi and got no help.Took me two years to find because the sets were not acting up when I was there.Last set was out completly with 2-4 code. Found problem to be cold solder connection of DY (Yokes) on vertical .I bent the tip on my Weller gun and used a mirror and soldered. It was a sure repair.I went back to the first set,and soldered and it repaired it!,The second set got junked out before I could get to it.

Sep 18, 2011 | Mitsubishi VS-50607 50" Rear Projection...

1 Answer

Mitsubishi vs50705 turn power on green button comes on then it shuts off quickly


TRY the self check here, this model may have it.

When green light comes on and goes off, on front of set press and hold both the menu and input buttons for at least five seconds and release both buttons.

Watch the power light, if it has the self check feature it will blink a two digit error code.

The most common is two blinks, two blinks, a pause and then repeat several times.

Let me know if find a error code.

SD TECH

Jan 16, 2011 | Mitsubishi VS-50607 50" Rear Projection...

1 Answer

AFTER TURNING ON TV ,THE GREEN LIGHT COMES ,SOUND STARTS AND THEN TV TURNS OFF ASAP


after tv shuts off press and hold menu and input buttons on tv at same time for about 8 second. power led will start to blink error code 12 ok 22 dead short 23 deflection failore 24 vertical failore. after you know error code have electronic technition repair for you. J.D.W.

Jun 24, 2010 | Mitsubishi VS-50607 50" Rear Projection...

1 Answer

Mitsubishi vs-50707


see a tech you need one they will come and take the panel off and thake the light box with them because you have a circiut problem

Feb 25, 2010 | Mitsubishi VS-50607 50" Rear Projection...

1 Answer

Mitsubishi Projection TV Model #VS-50603 will not turn on.


The TV is going into a "protect mode", the micro-processor has sensed a circuitry problem and has shut the set down so that no furhter damage can happen, you will need to have the TV serviced by a Mitsubishi tech. Good luck !

Jan 07, 2010 | Mitsubishi VS-50607 50" Rear Projection...

1 Answer

My vs-6055 you can hear it click but it wont turn on


check q570 if shorted replace it,also regulator ic401 goes bad along with c402 100mf/50volt electrolytic cap

Sep 01, 2009 | Mitsubishi VS-6055 60" Rear Projection...

1 Answer

Powers on to blue screen and nothing else


press the input button until it cycles through all of the inputs.

Feb 11, 2009 | Mitsubishi VS-50607 50" Rear Projection...

1 Answer

I have a Mitsubishi VS-50607 and it will turn on then off.


This solution fromtroylove solved my problem. troylove11
Rank:wizard_s.gif Wiz
Rating: 85%, 1164 votes
This model is equipped with a self-diagnosis feature to help with diagnosis of shutdown problems. To activate this turn the unit on let it shutdown then press the input/device and menu buttons on the front panel simultaneously and hold them in for 5 seconds after 5 seconds the power LED on the front panel will blink a two digit sequence. This will be one set of blinks a short pause then another set of blinks, this will repeat 5 times. 1 - 2 = no error detected 2 - 1 = X-ray protect (high voltage or beam current) 2 - 2 = Short protect (short protect monitors low voltage supplies) 2 - 3 = Deflection protect (this could be loss of vertical or horizontal deflection) 2 - 4 = Vertical protect (usually loss of vertical from the source.

Jan 03, 2009 | Mitsubishi VS-50607 50" Rear Projection...

1 Answer

Mitsubishi VS-50607 has Jitter at top of picture- intermitant


IF you would like help diagnosing your set. Go to the enclosed link. They have the service manual for your set and offer unlimited chat support for only 10.99. Just click on your sets manufacturer and you will see your model. Then click on the contact us link and provide your email address and they will email your manual and instructions on how to obtain your support. I am one of their techs
http://servicemanuals.vstore.ca/

Jan 14, 2008 | Mitsubishi VS-50607 50" Rear Projection...

1 Answer

Mitsubishi VS-50607


This model is equipped with a self-diagnosis feature to help with diagnosis of shutdown problems. To activate this turn the unit on let it shutdown then press the input/device and menu buttons on the front panel simultaneously and hold them in for 5 seconds after 5 seconds the power LED on the front panel will blink a two digit sequence. This will be one set of blinks a short pause then another set of blinks, this will repeat 5 times. 1 - 2 = no error detected 2 - 1 = X-ray protect (high voltage or beam current) 2 - 2 = Short protect (short protect monitors low voltage supplies) 2 - 3 = Deflection protect (this could be loss of vertical or horizontal deflection) 2 - 4 = Vertical protect (usually loss of vertical from the source.

Oct 04, 2007 | Mitsubishi VS-50607 50" Rear Projection...

Not finding what you are looking for?
Mitsubishi VS-50607 50" Rear Projection Television Logo

Related Topics:

332 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1229 Answers

The Knight
The Knight

Level 3 Expert

75774 Answers

Jaime Hernandez

Level 3 Expert

2336 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...