Question about Kodak EasyShare C713 Digital Camera

1 Answer

Fuzzy lines like interference on screen and then pictures once the camer is on for about 5 seconds or so.

Posted by on

  • Sandra Bauer
    Sandra Bauer Oct 14, 2013

    Once the camera is on for approximately 10 to 15 seconds horizontal fuzzy lines appear like intererence on a TV. They do show up on the picture as well. I was told it was the lens CCD sensor failing. Does that make sense and how much or can it be fixed?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 131 Answers

You\'ll need a donor camera, and to replace the lens mechanism is easiest..... the ccd is screwed on the back as part of the mech but worse case cenario is that you would have to swap the ccd\'s if the swapped lens mech was broke.



the ccd is basically an elecronic retina (as in "eye", not display)

Posted on May 25, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuzzy screen with lines on desktop computer


Dear Debbie,
Greetings from New Zealand! Try a different monitor & see if fault still exists...If not the monitor, then could be fault in box...either hardware or software....(???maybe interference from other devices in home/nearby???) Your may need to install/replace video card - if you have one? (I THINK that if it is a fault in the all-in-one motherboard type of video that a separate "PCI" video card MAY solve it?) I hope that these suggestions help?! 'b'ye - Bruce.

Dec 28, 2013 | eMachines Computers & Internet

1 Answer

Horizontal lines across screen picture going fuzzy in and out and then no picture at all


A horizontal line that rolls from the bottom to the top of the tv could be a Hum Bar. This is from a bad ground either for the house electric system or for the cable system. By code, these grounds are supposed to be connected (bonded) together. In other words, the electrical interference is going through your tv instead of into the ground. Fuzzy picture is usually from low cable signal. This can be due to bad cables, connections, or splitters or problems outside with the drop (cable line outside that runs to the house). Splitters, by design, lower the cable signal (i.e. a 2 way splitter cuts the signal in half). If you have unnecessary splitters you should remove them. If you have more than about 6 or 7 tvs, you may need to add an amplifier.

Jun 25, 2010 | Vizio VF551XVT 55 in. HDTV

1 Answer

Cannot view tapes. Picture fuzzy, interference lines on screen.


Well I have heard that sometimes the tape inside of the videocastettes that show the pictures on the screen wears out over time periods and from rewinding and fastforwarding so many times or the old age and useage so you could get the video castette tapes fixed but its not worth it now you should buy a DVD player because they are better and have less problems and most VHS tapes are on DVD too. Or check to see if any other devices are on at the same time.

Feb 23, 2010 | Panasonic NV-FJ620 VHS/S-VHS playback VCR

1 Answer

Concaved shadow


this is because of the magnetic interference, you better isolate the TV from the devices producing heavy magnetic interferences like Speakers Microwave, Cellphones and Cordless phones. Then go the main menu in that you will find setup option , in the setup option go to the picture setup you will find option called degauss just click on that, the screen will flash for a second and everything will be alright. Frequent degaussing is not advisable as it reduce the life of the projection tube.

Jul 25, 2009 | Toshiba 50H82 50" Rear Projection...

1 Answer

Picture goes off after a while


Call 1-800-Samsung to set up a warranty service call. They will repair it in your home if they send a Samsung Field Engineer. You probably have a bad Main bd.

Jul 01, 2009 | Samsung 32 in. LCD Monitor TV

1 Answer

LCD screen Olympus Stylus 1010 snowy and fuzzy with lines


This is a issue with just the LCD it needs to be replaced.

May 25, 2009 | Casio EXILIM ZOOM EX-Z60 Digital Camera

1 Answer

TV Keeps flashing Fuzzy black and white static then the picture appears


The half picture is a verticale problem. This is difficult to repair. Send to a repair shop.

Jul 19, 2008 | Sony KV-36XBR450 36" TV

Not finding what you are looking for?
Kodak EasyShare C713 Digital Camera Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Cameras Experts

kakima

Level 3 Expert

102366 Answers

Tony

Level 3 Expert

2600 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Are you a Kodak Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...