Question about Canon imageCLASS D320 Digital Copier

2 Answers

Copy is smearing from top to bottom on left side of paper about 1 inch wide.

When copying the copy comes out of printer with smudged streak the length of copy that in not readable. It is about an inch wide.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

I agree. We are a repair facility and this is what goes wrong.

Yocan search for the film online or the assembly.

P# HM1-0237, or HM1-0237-UFFS for the film itself

Posted on May 29, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 67 Answers

The print in the smudged area, does it wipe off the page like not fused well to the paper. Do you also have a crinkling noise, if so the sleeve in the fixing assembly has torn. You may still have it under warranty with canon and can get it fixed for free.
Good luck

Bob

Posted on Apr 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you clean the print rollers? All my copies have a long vertical smudge/streak that runs entire length of the right side of the sheet (8.5x11 and 11x17).


It might not be the rollers but the image drum. A bad image drum will sometimes cause streaks on print outs. If you look at the right side of the image drum you will probably see a streak that matches what is being left on your paper. Be careful not to touch the image drum as it will cause fingerprint on your printouts! Of course if the image drum is bad it will need replacing and fingerprints won't matter.

Mar 01, 2011 | Ricoh Aficio AP610N Laser Printer

1 Answer

Printout has a smudge or streak about an inch wide, full length of paper about 0.5 inch from left side.


You need to change toner cartridge for new one.
Most problems of quolity from it.

If is not help you, it may be broken termo fuser - go to service.

Dec 17, 2009 | HP LaserJet 1200 Printer

1 Answer

Dark streak


clean the glass lining. It is situated on the left of the glass when you open the document feeder...clean it with a damp cloth

Nov 17, 2009 | Xerox DocuPrint N17 Laser Printer

1 Answer

When printing, I see a vertical streak on the printed page, from top to bottom, about 2 1/4 inches from the left side of the paper, and about 1/16 of an inch wide. I can't seem to see what causes this. The...


This is more than likely down to the upper roller in the fuser assembly. It's the heat roller at the back of the printer. The upper roller wears so paper dust and toner stick to the roller which then can get deposited back on to the page.

Oct 15, 2009 | HP LaserJet 1020 Printer

1 Answer

Printer prints a black streak down the reverse side


You have a build up of ink inside the printer. I had a Canon that did this. I had to take the ink & print head out, and tear a paper towel strip 1 " wide and 13" long or however long the paper towel is. I folded it in half down the length so it was 1/2x13. Then used a plastic strip to shove it under the part the print head sits in. Once I got the towel to the other side, I grabbed it with my hand. I removed the plastic strip used to shove the paper towel under. So now the paper towel sticks out both sides underneath the print head cradle. I gently pull the paper towel back and forth so the paper towel can clean off the ink build up. Hope this helps.

Mar 29, 2009 | Office Equipment & Supplies

1 Answer

ADF copy with black streaks?


lift up your adf and locate the thin piece of glass, about an 1' wide, and clean real good with rag and windex. probably white out or some foreign material on that glass.

hth,
razors

Feb 27, 2009 | Brother MultiFunction Center MFC-440CN...

2 Answers

Lines down both the left side of the printouts.


good day,

this usually occurs when you print large volume of copies of documents that goes beyond the printable area of the paper, some powders stick in the roller of your printer hence making the gray streak.

you can check if the rollers have accumulated some powder, if so, have the rollers cleaned.

i hope this will help.

Oct 14, 2008 | HP LaserJet 4L Printer

2 Answers

Scanning document leaves streak down right hand side


Even a single grain of dust or a single strand of hair on the scanning glass will cause the scan head to perceive ink/image where there is none. Deffinetly try cleaning the glass using a good window cleaner, and a cloth that is completely clean, or even a peice of newspaper. If the black line remains, I would suggest taking it into a service center to have the scan head itself cleaned.

Dec 05, 2007 | HP OfficeJet 7310 All-In-One InkJet...

1 Answer

HP 7410 streaks on scanning and copying


First you need to determine if it's doing from both the  top and the glass.

1-assuming you are using the feeder to fax,copy or scan (the part that automatically picks up the paper) it comes out with a streak. Make a copy putting the paper on the glass and look at the copy. Does it have the streak?

2-lift the top and look to the left there should be a small 1inch glass, this is where it makes the copies from the feeder, is there a dot or white out or is the glass dirty? that's your streak, the paper is moving to make the copy,so the dot now looks like a line as opposed to making a copy on the glass it just sits there so a dot will stay a dot.

2- Clean with water or alcohol.

Oct 23, 2007 | HP OfficeJet 7410 All-In-One InkJet...

Not finding what you are looking for?
Canon imageCLASS D320 Digital Copier Logo

245 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1921 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...