Question about Audio Players & Recorders

Open Question

After updating the firmware of my LG HT503SH-A2 my player is now unresponsive. I can switch it on but it switches itself of after a couple of seconds no matter what I press.

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 76 Answers

SOURCE: sansa m240: 0 MB after wrong firmware update

If your Sansa does not recognize MSC (Mass Storage Class) mode, then your PC will not be able to communicate properly to it. Sandisk can fix it but you will have to email support@sandisk.com, to ask them how to proceed from here. Give them the following information: 1) Sansa device model 2) Firmware version on your device 3) What computer OS you have 4) Problem you're experiencing (what you've done) ZT3000 Beta tester of "0"s and "1's"

Posted on Aug 19, 2007

Ad
  • 45 Answers

SOURCE: firmware update

Here's the link to the newest firmware.
http://tinyurl.com/54a9wo

Posted on Jun 15, 2008

  • 2 Answers

SOURCE: compaq 8-port kvm switch firmware

HP Parts supposedly still stocks the EPROM for this model, so you can try to order it from the HP Parts Store. Check for part 340579-001.

Posted on Aug 04, 2008

  • 1 Answer

SOURCE: Philips GoGear SA3245 cannot be repaired

Philip Gogear is made in England and you know these little Gogears have BIOS chips in them and they can be flashed and upgraded. Flashed means erased and updated ,but those british s**ts aren't going to put the software out there, because they want you to buy more gogears. Now that you have a tramma relationship with your Gogear, chances are you'll buy another one. Like most abused children would.

Did you know that the British had information that the Japanize were going to bomb Pearl Harbor. They diidn't tell the United States because they wanted the U.S.A. to be dragged into the war.
And thats because the Germans were kicking the Sh*t Out of them...

Posted on Nov 22, 2008

  • 1 Answer

SOURCE: Where do I find the firmware update for LG kc550

find B2CAppSetup.exe,its program from LG to update firmware of your phone

Posted on May 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

LG BD670 won't boot after firmware update


Go online to LG, seek customer and technical support to resolve the firmware issue, since they are the ones who provided the update. They must have a fix for this problem.

Mar 20, 2012 | LG BD390 Blu-Ray Player

1 Answer

My sansa fuze at times freezes. I do not know why,


Hello,

When the blue ring is illuminated, first try the RESET for the Sansa Fuze.
The player should NOT be connected to any other device:
1. Slide and hold the Power switch up for approximately 20 seconds.
2. Release the Power switch.
3. To turn the player on, slide the Power switch up then release instantly.

1d7a380.jpg

When a RESET won't work or the player freezes again, UPDATE the firmware on the player in 2 steps.
The player should NOT be connected to any other device:

> step1: Enable MSC mode
1. Turn device OFF: when the player is frozen first perform step 1 and 2
of the RESET procedure:
1. Slide and hold the Power switch up for approximately 20
seconds.
2. Release the Power switch.
2. Slide the Hold switch down to Lock (orange colored dot showing).

fd30d03.jpg
3. Press and hold the left button ( |<< ) while connecting the device to the PC.

> step 2 : UPDATE the firmware
Use next page for updating the firmware on the player.
http://kb.sandisk.com/app/answers/detail/a_id/278
There are 2 methods for updating, for Windows operating system the
updater ( method 1 ) should work:
Method 1; Use the Sansa Firmware Updater
Method 2: Use the update board / Sansa forum
Look in the Update page for the steps to follow.

Jul 20, 2010 | SanDisk Sansa Fuze MP3 Player

1 Answer

My Sansa fuze mp3 player has become unresponsive and the screen has gone white (blank)... It does not respond even if I connect it to the computer. It does not turn off...What's wrong and how can it be...


it should turn off if you hold the reset (on) switch in the on position for ten to fifteen seconds. if that doesn't work, try downloading the firmware update. but be careful, i had the same problems, and when i downloaded the update...it ruined the mp3 player, and sansa would not help

Jan 11, 2010 | SanDisk Sansa Fuze MP3 Player

2 Answers

My view wont do anything, when i turn it on the only thing it does is turn the dial light blue, nohing else, when i plu it in, nothing. the blue light will stay on for however long the battery lasts, is...


Solutions are in order of increasing probability of data loss AND device recovery.
Screen messages are loose approximations

A Soft Reset
1. Hold Power switch up for 5 seconds.
2. Screen displays "Goodbye".
3. Restart

B. Hard Reset
1. Hold Power Switch for 30 seconds
2. Restart

C. Recovery Mode
1. Hold Power Switch for 5 seconds to switch device Off
2. Move switch to Hold
3. Press and hold Home button
4. Connect USB cable to device
5. Screen displays "USB" in small type and "16 MB Format" shows up in My Computer
6. Copy firmware files to "16 MB Format" drive letter
7. Disconnect USB cable
8. Screen displays "Firmware update"
9. Restart device

C. Force Format (This one wipes the data partition. Make sure all needed music/pictures/video exist elsewhere)

1. Hold Power Switch for 5 seconds to switch device Off
2. Move switch to Hold
3. Press and hold top/North/up of Scroll Wheel
4. Connect USB cable to device
5. Screen displays "Format and lose data"
6. Press right/East on Scroll Wheel to confirm
7. Screen displays "Formatting"
8. Restart device

D. Manufacturing Mode (included for completeness only)
1. Hold Power Switch for 5 seconds to switch device Off
2. Move switch to Hold
3. Press and hold centre of Scroll Wheel button
4. Connect USB cable to device
5. Windows detects a new hardware device
6. ???
7. ???
8. ???

Dec 27, 2009 | SanDisk Sansa View 8GB MP3 Player - Black

2 Answers

Sansa 260 R load main image failed message


Hello,

The Sansa e260 Rhapsody could be recovered by resetting the player.
How to reset the player :
1. Player switched on.
2. Press and hold the power button for approximately 30 seconds.
3. Put the player back on.


When the fault is not resolved a firmware update / reinstallation needs to be made. There are 2 steps needed for getting new firmware on the player.

Step 1: switching the player into recovery mode / MSC mode

1. Turn off the player.
2. Slide the Hold/Lock switch on top of the player so an orange color is showing.
3. Press and hold the REC button and connect the device to the computer.
4. A message will appear on the device display screen confirming the connection and a memory partition will be viewable in My Computer.
5. Release the REC button.
Step 2: Update the firmware ( updating firmware always in MSC mode, see Step 1 )
Use next link for updating the firmware:
http://kb.sandisk.com/app/answers/detail/a_id/306
The Sansa updater installation on the computer should be the easiest way to update firmware.

Need more help ? Just post a comment.

Dec 17, 2009 | SanDisk Sansa e260 MP3 Player

2 Answers

My sansa sanclip just froze.iit was charging and


Hi.

You have two Solutions.

Solution 1:

Resetting the player:
1. Slide and hold the Power switch up for approximately 20 seconds.
2. Release the Power switch.
3. To turn the player on, slide the Power switch up then release instantly.

****************************************************************
c2511e7.gif
****************************************************************

Solution 2:
Updating the Sansa Clip Firmawre:
  1. If it's not installed yet, download and install the Sansa Firmware Updater.
  2. Connect your Sansa Clip to the computer.
3.1. Assuming there's a new firmware available, the following message will appear on your lower right task bar. Click on the balloon message:

*************************************
68bf43c.gif
*************************************
3.2. 3b. OPTIONAL: You can also manually run the SansaUpdater from your programs files. Most likely it will be under All Programs > SanDisk > Sansa Updater > Sansa Updater.

4. Select the Firmware check box.
********************************************************************************************
9bfa31c.gif
********************************************************************************************

5. Click Download Now. Firmware downloads and updating starts.

********************************************************************************************
72ec881.gif
********************************************************************************************

6. Click Finish after the firmware has been downloaded.

********************************************************************************************
f7b3008.gif
********************************************************************************************
7. Disconnect your Sansa Clip from the computer.
8. A "Firmware upgrade in progress" message will appear on the Sansa Clip's display screen. The device will turn itself off after the firmware is updated.

Additional Help:
Sansa Clip Manual Guide.


If you need any Further Help Just don't Hesitate Asking me.
Thank You For Using Fixya.
Good Luck.


Nov 03, 2009 | SanDisk Sansa Clip MP3 Player

7 Answers

Power swtich off in transcend t.sonic 610 mp3 player


Install the firmware update that comes with the player. The solution is as simple as that. I had the same problem - the player was switchin off on its own. I installed the firmware update and it works like a charm. :)

Dec 05, 2007 | Transcend T.sonic 610 MP3 Player

3 Answers

Delete or reset a wrong firmware file for IVO- m600 mp3 Player (Rockchip)


This is how to get into update mode,

All you do is this,

1) Switch the player OFF using the main on/off switch.

2) Hold down the "MENU" or the "PLAY" button and keep it held down.(try the other buttons if these dont work)

3) Connect the usb to the player.

4) Wait for about 10 seconds before releasing the button.

5) You should be now in "ROCK USB" upgrade mode

6) Then just start ConsumerUpdate and upload your firmware.

Nov 18, 2007 | Audio Players & Recorders

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

102366 Answers

 Grubhead
Grubhead

Level 3 Expert

5113 Answers

The Knight
The Knight

Level 3 Expert

74185 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...