Question about Kenmore 30464 / 30465 / 30469 Gas Single Oven

1 Answer

Kenmore gas stove - Top burners work but the oven doesn't

So this is an older model 119 7408210 but I love it 'cause it has a
griddle and a compartment to put my pots & pans in.

The top burners (including the griddle) work but the oven doesn't.
My husband thinks it's the ignitor . I can order it online for $64 but was
wondering if anyone else ever came across this problem.

Tired of eating fried & microwaved food. I need my oven back.

Thanks,
Melanie

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Dedicated:

    Visited the website for 20 consecutive days.

    Passionate:

    Visited the website for 10 consecutive days.

  • Kenmore Expert
  • 64 Answers

Hello Melanie!
Does the oven not heat? Are you able to program the oven at all? or is the display or read out blank?
Do you see any error codes? What youre experiencing may be control board related. If so, Fixyourboard.com can help. Feel free to respond to these questions here -- info@fixyourboard.com
Best,
Megan

Posted on Jun 06, 2017

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

fridgetech
  • 473 Answers

SOURCE: KENMORE GAS STOVE OVEN LOWER BURNER WON'T WORK

First look to see if the ignitor is coming on. Most common problem is the ignitor is weak or just bad. When the power is applied to the ignitor it glows and builds up resistance to open the gas valve then it lights. If the ignitor is weak or bad it will not build up enough resistance for gas to come into the burner. One sign of this would be a "woosh" sound when it trys to light. If the ignitor is coming on but not lighting it is most likely the ignitor is bad. Should have a full glow. Also, if the ignitor looks whiteish in color this is a sign of it going bad. You can compare to the broil ignitor to be sure. If the ignitor doesn't come on at all will need to see if you have power to the ignitor. Let me know what you find and let's solve it before you rate the solution.

Posted on Nov 11, 2007

  • 1314 Answers

SOURCE: Kenmore Stove (coils)

if the timer is on hit cancel or reset then hit clock and then use up and down arrows to set them also locate the serial plate and give me the mod num will be a buch of num like 106.48062890 around the bottom drawer on the body of the range or around the oven door if the eoc or clock isnt lit go turn the breaker off for 5sec and let me know

Posted on Dec 29, 2007

captaynkyrk
  • 170 Answers

SOURCE: Kenmore Oven

The igniter may need to be replaced again. The only way to know is to test it to see if it has enough amperage to light the gas. If it glows, but no lighting of the gas, get it tested.

Posted on Jul 20, 2008

johnrodgers1
  • 73 Answers

SOURCE: Gas stove top works, broiler works, oven does not

is it electronic iginition? are you asking about top burner pilots? if so there are under the top in the middle beteen each side of the burners 1 pilot does burners on right and 1 on left. oven pilots are underneath you have to remove bottom door look in there at back and look up and you'll see it. if its a electronis ignition range you have no pilots!! glow coils and sparkers....

Posted on Feb 06, 2010

heatman101
  • 43501 Answers

SOURCE: Kenmore Gas Oven doesn't heat

Hi,
Here is a tip that I wrote that will help you with that problem...

The ignitor for your burner has faied...

http://www.fixya.com/support/r3663023-oven_not_working_or_oven_not_heating

heatman101

Posted on Apr 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Stove top ignitors do not ignite but oven does.


Electric gas igniters sometimes get stuck in one position causing a clicking sound. The clicking sound that you hear is the electric arc that is pulsing from the igniter conductor (wire) to ground (the gas burner). It receives power from the electrical outlet that the stove is plugged into.
Residue from food and sometimes cleaning products may be preventing the igniter from producing a spark (Arc) to the base of the burner. This is a common problem that occurs when the stove has been cleaned or food is allowed to build up. Make sure that the igniter and the burner base are clean and dry. This will help with proper operation. Oven cleaner and a small tooth brush may be used to accomplish this. Another problem with ignition may occur if you have too little (touching) or too much space between the igniter and the base of the burner; it will prevent the burner from igniting. You should only have a little more space than the thickness of a nickel between the burner base and the igniter. A good “blue” arc from the igniter to the burner base is optimal. If this doesn’t work, you may need to replace the electric igniter module. Good luck.

Mar 20, 2010 | Whirlpool 30" Self-Cleaning Freestanding...

1 Answer

Gas stove top works, broiler works, oven does not


is it electronic iginition? are you asking about top burner pilots? if so there are under the top in the middle beteen each side of the burners 1 pilot does burners on right and 1 on left. oven pilots are underneath you have to remove bottom door look in there at back and look up and you'll see it. if its a electronis ignition range you have no pilots!! glow coils and sparkers....

Feb 06, 2010 | Kenmore 30464 / 30465 / 30469 Gas Single...

1 Answer

I have a kenmore gas range with electric ignitors. My question is that my stove top doesnt ignite but lets gas by and I can use a lighter to lite them. However my oven doesn't do anything...no gas no...


Electric gas igniters sometimes get stuck in one position causing a clicking sound. The clicking sound that you hear is the electric arc that is pulsing from the igniter conductor (wire) to ground (the gas burner). It receives power from the electrical outlet that the stove is plugged into.
Residue from food and sometimes cleaning products may be preventing the igniter from producing a spark (Arc) to the base of the burner. This is a common problem that occurs when the stove has been cleaned or food is allowed to build up. Make sure that the igniter and the burner base are clean and dry. This will help with proper operation. Oven cleaner and a small tooth brush may be used to accomplish this. Another problem with ignition may occur if you have too little (touching) or too much space between the igniter and the base of the burner; it will prevent the burner from igniting. You should only have a little more space than the thickness of a nickel between the burner base and the igniter. A good “blue” arc from the igniter to the burner base is optimal. If this doesn’t work, you may need to replace the electric igniter module. Good luck.

Nov 06, 2009 | Kenmore 40494 / 40495 / 40499 Electric...

2 Answers

KENMORE GAS STOVE OVEN LOWER BURNER WON'T WORK


Most likely a hot-surface ignitor has failed. If it doesn't consume enough current, the gas valve won't open. It's usually a fairly easy fix, once you gain access to the ignitor and have a new one to replace it with. Make sure you unplug the range...

Apr 25, 2009 | Ovens

1 Answer

Oven not working!


we're having the same problem.lol

Apr 10, 2009 | Kenmore Ovens

1 Answer

Kenmore gas stove Model 790


It could be that the sensor wire that controls the main gas valve is out of position. It should sit in the pilot light flame.
Look, and adjust if needed.
If it's ok, then you need a replacement main gas safety valve.
This should only be fitted by qualified personnel.
They do give up eventually after years of heating, and fail safe.

Dec 31, 2008 | Kenmore 40494 / 40495 / 40499 Electric...

1 Answer

I HAVE AN OLDER MODEL KENMORE LIMITED EDITION STOVE/OVEN. I DON'T HAVE THE MODEL NUMBER OR OWNERS MANUAL. ANYWAY, I HAVE A PROBLEM, I TRIED TO USE THE OVEN BUT AFTER I SET IT " F5" COMES UP AND IT BEEPS...


you can get the model number and serial number from the oven, just open the oven drawal and get the number and call the customer service from where you got this oven from.

Dec 05, 2008 | Kenmore 40494 / 40495 / 40499 Electric...

2 Answers

Oven won't heat


do you see a bright glow in the oven area when the oven is turned on it will take 20 secs or so..If not your ignator maybe bad no gas will flow into the oven unless the ignt. is good

Mar 03, 2008 | Kenmore 30464 / 30465 / 30469 Gas Single...

2 Answers

Problem with Kenmore Electric stove


I have kenmore stove mod.790-95660103 you turn on any top burner . T he small one inside the big burner comes on Roy

Nov 24, 2007 | Kenmore 40494 / 40495 / 40499 Electric...

Not finding what you are looking for?
Kenmore 30464 / 30465 / 30469 Gas Single Oven Logo

Related Topics:

628 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Ovens Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Brad Brown

Level 3 Expert

15478 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

Are you a Kenmore Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...