Question about HP LaserJet 4730mfp All-In-One Printer

1 Answer

I am receiving a 49.00FF Error - Turn off then on error when I use the digital sending feature of the MFP. Sending via email works as advertised.

Posted by on

  • Philippe Gagnon
    Philippe Gagnon Nov 01, 2013

    I have installed the latest firmware version and unfortunately it is no help.However I have determined that the error only occurs when scanning color documents.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • HP Master
  • 1,121 Answers

Latest released firmware version need to up load in the printer. Down load latest released firmware & Upload it..

Posted on Oct 12, 2013

  • Philippe Gagnon
    Philippe Gagnon Nov 01, 2013

    I have installed the latest firmware version and unfortunately it is no help.However I have determined that the error only occurs when scanning color documents.

  • Philippe Gagnon
    Philippe Gagnon Nov 01, 2013

    I have installed the latest firmware version and unfortunately it is no help.However I have determined that the error only occurs when scanning color documents.

×

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
indus3
  • 212 Answers

SOURCE: I get an error in HP LaserJet 4345 MFP printer,

a 49.xxxx error on an HP means that there is an issue with one or more hard disks. you can try to re-initialise the hard disk(s) by rebooting the printer while holding the green button. when the three leds are lit, release the green button, and navigate using the numerical buttons until you see "initialise hard disks" on the display of the printer. confirm by pressing the green button again. if all goes well, your printer will take two minutes longer than usual to boot. if you still get the same error afterwards, you need to replace the disk.

Posted on Apr 21, 2010

  • 1 Answer

SOURCE: SCANNER ERROR 20 of HP LASERJET M1120 MFP

PRINTER: HP DESKJET M1120 MFP DISPLAY SCREEN SAYS; "SCANNER ERROR 20"...

ANY IDEAS HOW TO FIX?

MANY THX!

Posted on Feb 04, 2011

  • 35 Answers

SOURCE: SOLUTIONS FOR FAX PROBLEM COMM

Try turning off ECM in the Fax Settings Menu.

Posted on Mar 17, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My outlook express has stopped sending and receiving mail


When you click send/receive in Outlook Express you should see an error if there is a a problem. You can also try and access your email via the web to determine if it is accessible. Also in Outlook Express you can press the ALT key, followed by FILE and make sure you are not set to work offline. Online Virus Removal Best virus removal online

Dec 10, 2014 | Computers & Internet

1 Answer

Is there a way to hook up my hp lazer jet pro m1212 nf mfp to be able to send a fax utiling my laptop which is by wifi. In other words no land line available.


Without a dial-up line available for your fax machine, the only other way to fax is via the internet if it's supported by your MFP. Google online faxing or fax via internet for solutions you may be able to use in your situation.

HISTORY
Fax or facsimile was invented as a way to take a printed document, scan it into digital form and transmit it to it's destination in a matter of seconds -vs- sending it via an expensive courier taking hours or days. This is before the internet, Adobe and other players made a way to create and send documents via the internet without the need for a fax machine and dedicated phone line. While faxes may still be sent that way when the printed document is the only media available, faxing has died off considerably. Most large companies now have ways implemented to move documents digitally without the need to fax. I predict the fax portion of a MFP to disappear in the not too distant future. Earlier MFP's didn't include a fax feature and one had to but the next model up to get it, now it's included in nearly every MFP. Adobe's PDF format with the ability to fill in the forms fields electronically (as in your US taxes) without having to have expensive office software made printing and faxing a thing of the past. Don't be surprised if the business or other entity requests you, and all of us, to submit a PDF document to their business email address rather than a fax.

Good luck with your quest!

Oct 15, 2013 | HP LaserJet Pro M1212nf MFP -...

1 Answer

On my activity report, under comment is states TX ECM I know the TX is transaction (I think?) what does ECM stand for


ECM (Error Correction Mode)
The Error Correction Mode (ECM) is a way for the fax machine to check the integrity of a fax transmission while it is in progress. ECM transmissions are possible only between machines that both have the ECM feature. If they do, you may send and receive fax messages that are continuously checked for their
integrity.
Sufficient memory must be available in your FAX/MFC for this feature to work.ECM (Error Correction Mode) Detects errors during fax transmission and resends the page(s) that had an error.
If you have Call Waiting, RingMaster, Voice Mail, an answering machine, alarm system or any other
custom feature on a single phone line with your fax machine, it may create a problem sending or
receiving fax data.
For Example:
Your Brother machine handles the Caller ID and Call Waiting/Caller ID subscriber services.
However, if you subscribe to only Call Waiting or some other custom service and its signal comes
through the line while your machine is sending or receiving a fax, the signal can temporarily interrupt
or disrupt the fax data. Brother's ECM feature should help overcome this problem. This condition
is related to the telephone system industry and is common to all devices that send and receive
information on a single, shared line with custom features. If avoiding a slight interruption is crucial
to your business, a separate line with no custom features is recommended.

Jan 20, 2011 | Brother IntelliFAX 2800 Laser Fax

1 Answer

I have M 1522 MFP. It is not sending nor receiving faxes. Error "low memory"


Very easy fix. NVRAM, hold down the down arrow and the cancel button while the printer is off, turn the printer back on while still holding the buttons down. Hold until you see permanent storage init.

Al

Jan 18, 2010 | HP LaserJet M1522n MultiFunction Printer

1 Answer

Trouble sending & receiving comcast email messages Motorola q9m


Irecently had comcast email and changed to att email and would lke all my old email imformation changed over to my new one att, how do I go about doing that? I have important imformation that I need to keep. Freddiemumford

Apr 04, 2009 | Motorola Mobility Q9m Smartphone

3 Answers

Problems with sending and receiving emails


This particular account is trying to relay. Having worked for an ISP before most people do not allow this. Have you EVER been able to send to this person from this same account that you are using?? Chance are no and the reason you can send to someone else is because there account is fine. Can you send an email to yourself or another email that you may have?

Dec 01, 2008 | Yahoo Mail

1 Answer

My windows vista will not send or receive emails. When sending I receive Error 0X800CCC0F Wher nreciving I recive Error 797, Modem not found.


If you don't have a modem on your machine, you must have another way to connect to the Internet, an ethernet card, or a wireless card.

If you are connected to the Internet this way, you should change the configuration on your email account to use the connection, instead of dialing via a telephone line.

If you're uncertain what to do next, tell me the email program you are using (Windows Mail, Outlook, Thunderbird...), and how you connect to the internet, and I'll try to give you additional details.

Hope that helps!

Jul 21, 2008 | Computers & Internet

1 Answer

Brother MFC 8860DN: Send Problems


Update the firmware and it does support SMTP-AUTH

Nov 04, 2007 | Brother MFC-8860DN All-In-One Laser...

4 Answers

Internal Error 923 with Sending or Receiving Fax


I've just got my CLX-3160FN and found the same problems. Could go around the sending error, but can't receive faxes yet, always error 923.
Sending: make sure you press the "On Hook Dial" button before entering the recipient's number. Stupid, very stupid, but it's how it works.

Oct 12, 2007 | Samsung CLX 3160fn All-In-One Printer

Not finding what you are looking for?
HP LaserJet 4730mfp All-In-One Printer Logo

Related Topics:

320 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...