Question about Dedicated Micros Digital Sprite 2 RS Video Recorder

2 Answers

None of the buttons on the front do anything... locked up

The live light is on and the record light is on. Can not change any settings or cameras, well..... can not do anything.....

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,180 Answers

Key board fail if one button is stuck in on startup the buttons will not work after. if the menu button is stuck in when you press certain buttons the leds will change to different led lights but no menu or camara control.

Posted on Oct 06, 2013

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

Couple of possibilities here, could be a stuck button, could be a fan dragging and pulling the voltage down, check the PSU, low voltage can do this. Could be a disc problem, replace HDD and download latest software version from DM site reload and try again. Could also be "frozen", and if your PSU and HDD is healthy a reboot should solve this. No definitive answer.

Posted on May 08, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

My GL2 only works when I turn it on to playback mode. When I try to turn the camera on in camera mode, it doesn't work. What could the problem be?


There is a simple solution to that... You see under the 'card-tape' switch? There's the red button for recording... attached to that button the is a switch that says 'tandby or lock'.... if you have it in 'lock' it will not let you go to record mode, you have to change it back to 'standby' and that should solve your problem.... Anymore question just e-mail me at Jacob.Bahling@Live.com and I was wondering if you had a copy of the installation CD I can buy or have.... or maybe you could tell me where to get it? Thanks.

Sep 26, 2009 | Canon GL2 Mini DV Digital Camcorder

1 Answer

Cant record


Set that switch to Camera to record live view. Press red button to start recording and press again to stop recording.

Apr 17, 2009 | Sony Handycam DCR-PC110E Mini DV Digital...

1 Answer

DVD locked in and door is not opened


might have stuck inside...u got to open up the system onlly

Apr 01, 2008 | LG RH177 DVD Recorder/HDD Recorder

1 Answer

Panisonic TV all locked up


Hi,

Any other developments (or lack thereof) after our Live Chat?

Regards.

Mar 20, 2008 | Panasonic TH-37PX60U 37 in. Plasma HDTV

1 Answer

Can't turn on my camera!


Hi..

I have a link and some information I found on the video option to your camera. This link is for the manual located on hp.com:
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?product=371583&lang=en&cc=us&lc=en&dlc=en&

The following is how to stop video:
To stop recording video, press and release the Video
button again; otherwise, the video will continue recording
until the camera runs out of memory.

NOTE
If you have set the camera to Self-Timer or Self-Timer -
2 Shots (see Using the Self-Timer Settings on page 44),
the camera will start recording 10 seconds after you press
the Video button. However, with the Self-Timer - 2 Shots
setting, the camera only records one video clip.

After recording has stopped, the first frame of the video clip
appears on the Image Display. While it is processing, you can
delete the video clip by pressing the Menu/OK button

Good luck and please let me know if there is anything else i can hep you with--feedback would be geat.. thanks, d

Feb 27, 2008 | HP Photosmart R707 Digital Camera

1 Answer

T.V. is stuck on video 2


Did someone lock the front panel? if not check to make sure none of the front panel buttons are stuck pushed in. If that is all ok try unplugging the TV set for 24 hours, if that does not work, the microprocessor is bad. good Luck

Apr 08, 2007 | Sanyo DS27930 27" TV

1 Answer

Recording


The EDSR1600 will not go into manual recording mode (by pressing the REC button on the front panel) unless all of the automatic modes are disabled and the hard drive bays are firmly pressed in and locked. Press the MENU button, select ALARM and turn everything in the OPeration column to OFF. Return to the MENU, select MOTION and also turn set all the OPerations to OFF. Return again to the main MENU and under RECORD, set ALARM RECORD OPERATION to OFF, PRE-ALARM RECORD OPERATION to OFF, and PERMANENT RECORD OPERATION to OFF. Note: Turn the JOG wheel clockwise or counter-clockwise to select an option. Press the ENTER button to confirm the option and move to the next field. Press the MENU button to enter, or return to the main MENU. Press the MENU button twice to exit the main MENU. To check if the round key locks on the front of the Hard Drive bay trays are locked, turn OFF the EDSR1600. Open (pull down) the left side front cover and gently pull up on the drive bay handles. If locked, the handles should not lift and the bays should not slide out. After your check, press the bays in firmly to ensure good seating of the Hard Drives. The ESDR1600 should now go into manual RECord if the DVR is working properly. The red REC LED should also light each time a recording is being made. If the REC LED flashes, this means the DVR is recording a field or frame of video.

Jan 26, 2007 | EverFocus EDSR1600 16 CHANNEL 160GB...

1 Answer

Video recording


this doesnt work indoors if the light is not good enough so stop trying. Additionally have it on 320 resolution for a more frame rate ( better picture..)

Dec 27, 2006 | DXG Technology DXG-305V Digital Camera

1 Answer

Strange problem in dcr trv 140 sony camcorder.


Did you turn the exposure lock on? That would lock the iris so that it will not adjust for changes in lighting.

Sep 14, 2005 | Sony Handycam DCR-TRV140 Digital Camcorder

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

436 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dedicated Micros Televison & Video Experts

CoppellTVRepair.com

Level 3 Expert

749 Answers

electracon

Level 2 Expert

78 Answers

 Russ Hill
Russ Hill

Level 3 Expert

3180 Answers

Are you a Dedicated Micros Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...