Question about Remote Controls

2 Answers

Lost manual i have lost the maual for my control and need to program the control to my tv and dvd player and have no idea how this is done. Any help would be gratefully recived

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: lost manual

I have this same problem. Please help me ASAP because I cannot use my remote.


Roger Goodrich

Posted on Sep 28, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 149 Answers
Re: lost manual

You need CODES in order to program them. You can do this by calling the manfacturer support to get their codes in order to opperate the two. As long as they are the same manufacturer or in a similar Ir signal they will work ok with the codes. Keep in mind, some products dont match up with others because of their IR is different... What is the manufacturers of your products?

Posted on Sep 24, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I lost my manual for my remote control universal Philips I need help for my codes to programming a DVD player Coby 154

My manual lists 0294, 0296, 0396, 0293, 0146, 0494, and 0091. You also should be able to use the code search function to find the code.

Turn on player. Press and hold CODE SEARCH button until red indicator stays on, then release CODE SEARCH button. Press VCR/DVD button once to cause red indicator to blink once. Press CHANNEL UP button (up to 300 times!) until player turns off then immediately press MUTE button to install code.

Good luck with that 300 times!

Sep 02, 2012 | Philips Universal Remote

1 Answer

Sanyo tv,RCA universal remote,Diamond Vision player--compatible?

Sorry it took so long to respond to your request for assistance. You can find the instructions and codes you need to program your television at the RCA customer support website [ ] Copy this web address and paste it into the address bar of your web browser. This will take you to the RCA main customer support page. Just go to the universal remote control section and find your model remote control. Use the model number to find the technical support information page. On this page will be a copy of the owners manual and the remote control codes to use with your products. I hope this information helps you with your problem of needing instructions and codes to use your remote with your products. Thank you for using FixYa and have a nice day!

Jan 12, 2009 | RCA 3-Device Universal Remote with...

1 Answer


Hi if you go to there website you can download any manual you need and find any codes you want.

Dec 29, 2008 | One For All URC 7740 Remote Control

4 Answers

Codes to program Innovage Products Jumbo Universtal Remote

Innovage Jumbo remote codes for RCA TV; 000, 003, 004, 005, 007, 009, 011, 015, 048, 082, 092, 094, 096, 098, 102, 103, 107, 113, 125, 129, 167, 179, 187, 188, 191,194.
Pansonic DVD; 175.
Pansonic VCR; 021, 060, 115, 125, 138, 148, 149.
Philips DVD; 173, 183, 198.
Bell ExpressVu; 168, 187, 194.

Dec 18, 2008 | Remote Controls

1 Answer

Remote set up

I have a GE universal remote and have lost the manual it came with. I need to program it to my AKAI TV set but don't have the code or instructions. Can you help?

Dec 16, 2008 | GE JASRM24912 Remote Control

1 Answer

Lost the manual for programing codes

I need to know if there is codes for a 5 disc changer dvd player that is Durabrand model

Oct 08, 2008 | RCA RCR311B Remote Control

6 Answers

Lost the manual for programing codes

i need to know how to program the remote

Dec 13, 2007 | RCA RCR311B Remote Control

4 Answers


The One For All 3 Device Universal Remote Control is preprogrammed at
the factory to operate an RCA TV, a Toshiba DVD player, and a Motorola
cable box.To control devices other than the default brands,perform the following
steps; otherwise skip this section:
1. Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely before proceeding.
Highlight or write down the codes and device you wish to program
before starting step 2.
2. On the remote control,press a device key once (i.e., DVD/VCR,
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,
or TV/VCR/DVD Player Combo press DVD/VCR once.After programming
a VCR Combo device, you will be able to control channel selection,
volume, and VCR functions.
NOTE: To program control of a DVD Player,DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD/VCR once.After programming
a DVD Combo device, you will be able to control channel
selection, volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.
3. Press and hold SET until the LED (red light) blinks twice,
then release SET.
4. Use the Manufacturer’s Codes (starting on page 18) to
locate the type of device and brand name and then enter
the first four-digit code for your device. If performed correctly,
the LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.
5. Aim the remote control at the device and press POWER
once.The device should turn off. If it does not, repeat
steps 2 through 5, trying each code for your brand until
you find one that works. If it still doesn’t work, try
Searching For Your Code on next page.
NOTE: If the device does not have a POWER key, press PLAY.
6. Repeat steps 1 through 5 for each device you want to control.
For future reference,write down each working device

Here is a link to your manual:

Nov 26, 2007 | One For All URC-3021 Remote Control

3 Answers

Programming my URC-3021

Magnavox 0054, 0706, 0030, 1454, 1254
Symphonic 0180, 0171
Emerson 0479, 1479, 1278
If your device does not respond to the remote control after trying all codes
listed for your brand, or if your brand is not listed at all, try searching for
your code.
NOTE: Before performing a code search for a DVD player or a VCR, turn on the device and
insert the required media.
For example, to search for a code for your TV:
1. On the remote control, press TV once.
2. Press and hold SET until the LED (red light) blinks twice,
then release SET.
3. Enter 9 - 9 - 1.The LED will blink twice.
4. Aim the remote control at the TV and slowly alternate
between pressing POWER and TV. Stop when the TV turns off
(after pressing POWER). If the device does not have a Power
key, you can substitute another function, such as digits 0 ~ 9 ,
CH, or PLAY).
NOTE: In the search mode, the remote control will send IR codes from
its library to the selected device, starting with the most popular code
5. To lock in the code, press and release SET.The LED will
blink twice.
6. To search for the codes of your other devices, repeat steps
1 through 5, but substitute the appropriate device key for
the device you are searching for.
here is the maual for your remote:

Nov 05, 2007 | One For All URC-3021 Remote Control

2 Answers

Lost manual

go to the Philips Magnovox website- you should be able to find an online manual

Nov 03, 2007 | Philips Magnavox Learning Universal Remote

Not finding what you are looking for?
Remote Controls Logo

Related Topics:

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top Remote Controls Experts

The Knight
The Knight

Level 3 Expert

66623 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4722 Answers

Are you a Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides