Question about Sony VAIO PCV-V200G PC Desktop

2 Answers

I'va had this pc for about five years. It turns on past booting but once it gets to the windows xp loading screen the Monitor goes blank and shows a no signal message. The tower ( an emachine) still show the power light lit and the fan and drives can still be heard running. Sometimes this occurs without getting to the windows xp loading screen.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Sony Master
  • 4,806 Answers

Hi there.
Boot into safe mode by restarting the pc and hit F8 as it boots, if it lets you into XP uninstall the graphics drivers from device manager then reboot the PC in normal mode and let the system reinstall the drivers again.

Good luck and thanks for using FixYa!!

Posted on Apr 23, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,383 Answers

U have problem of disaply scren resolutio for that

when u power up the computer press F8 key then u see safe mode and other menu
then enter in enable vga mode .
then u can change screen resolution to 1024*768 in dispaly property

Posted on Apr 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Thinkpad blank screen


Once you run safe mode. You can turn off the laptop. Then start booting normally.

Mar 02, 2012 | IBM ThinkPad T20 2647 Notebook

1 Answer

Screen flickers so that screen is unreadable. I can connect to an external monitor but once you get past the windows xp startup screen the external monitor goes blank and the laptop monitor lights up but...


try uninstalling the graphics driver and reinstall, also boot up in safe mode and see if you can see screen ok, if you can its your graphics card as in safe mode no agp drivers are engaged

Feb 14, 2011 | Computers & Internet

2 Answers

Screen goes blank after booting with WinXP SP2 CD.


Hi, your will need to delete your windows XP re format that part of your hard drive, then re install XP

Jul 04, 2010 | Microsoft Windows XP Professional SP2

2 Answers

Dell 8400 Refurbished by with WinXP Pro preinstalled will not boot up. Gets past Dell XP Logo, then goes to blank screen with curser...however, keyboard locks up and can not get any further? What's th


windows is not loading properly.
if you're not worried about anything on the computer:
insert the recovery CD, boot the system to the CD, and reinsatll windows.

May 19, 2009 | Dell Dimension 8400 PC Desktop

1 Answer

Signal out of range


If your PC is working with a different monitor then your monitor is going bad.

Mar 28, 2009 | Computers & Internet

2 Answers

Monitor displays breifly then goes to blank screen


If tried the monitor on two other computers with the same result -- definitly your monitor is faulty. Take it to the repair shop. To make double sure, run your computer with another monitor. If everything is fine now; you can blame the monitor.

Dec 17, 2008 | Dell Dimension 4600 PC Desktop

3 Answers

BSoD, Garbled Screen, Boot Failure.


If you are getting garbage on the screen before windows tries to load the laptop probably has a bad motherboard.

It's possibly only the video output is going bad on it, try hooking it to an external monitor and see if you get the same weird stuff on that screen.

Good luck, let me know how it goes

Nov 15, 2007 | Compaq Presario X1000 Notebook

2 Answers

MONITOR GOES BLANK


Did you recently change or install a program that would affect the resolution and card output? Try booting into safe mode by holding the "shift" key during boot. From there right-click on the desktop and hit 'properties'-> 'display properties' -> 'settings' , check your resolution and drop it to 800x600 and then reboot. If everything goes back in normally make sure you have the right windows drivers for your video card. You can also check the driver version and settings while you're in safe mode. Sometimes the windows update drivers can act screwy and I would recommend getting them directly from your card manufacturer.

Aug 19, 2007 | Dell Dimension 4600 PC Desktop

Not finding what you are looking for?
Sony VAIO PCV-V200G PC Desktop Logo

271 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Martin Murray

Level 3 Expert

1623 Answers

Are you a Sony Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...