Question about Whirlpool Ultimate Care II LSQ9564J Top Load Washer

1 Answer

Replace lid switch on maytag MTW5740TQO - Whirlpool Ultimate Care II LSQ9564J Top Load Washer

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 74 Answers

The control panel is screwed to the top with one screw on each side. Under the panel are two clips You pop them out and remove the outer sheet metal chassis. Undo the connector for the lid switch. You can get a replacement lid switch on line or from your local appliance parts store. Relplace the lid switch, plug it in to th connector and reverse the process to put back the chassis cover and control panel.

Posted on Oct 11, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Maytag washer lid switch is working only part of the time?


its usualy a standard spst micro switch and quite common
so easy too get hold of

here is a nice you tube video i found to show you whats what
https://www.youtube.com/watch?v=j7lLC2UYTOw

good luck and take a good look
get all the bits and tools in one place
then do the job

TIP:___
remember when you rescrew a screw into plastic or soft alloy
turn it anticlockwise till it clicks in the thread
then turn it clockwise to tighten
and only hand tight + a bit is best
so watch the plastic threads this way...

Dec 20, 2014 | Maytag Washing Machines

1 Answer

Maytag lat9593abw does not agitate


The lid switch, which prevents the washer from agitating or spinning when the lid is open, could be malfunctioning. If that happens, a built-in failure detector will stop washer operations until the lid switch is repaired. Replace with this part. Here is a video to walk you thru the repair.

Dec 05, 2010 | Maytag Washing Machines

3 Answers

Maytag Performa MTW5740TQO. You have to shut the lid hard several times to get it to start.


Sounds like a problem with the lid switch coming apart. I would recommend replacing the switch. Here is a link to part if you need it.
http://www.appliancepartspros.com/part_details.aspx?part_id=4008752

Nov 21, 2010 | Maytag Performa PAV2200

1 Answer

Maytag washer stops at spin cycle


Hi, You can get to the lid switch by removing the screws that hold the control panel to the cabinet. This model has a fuse included with the lid switch.
I hope this helps you.
Please let me knwo if I can assist you further.

Vic

Jul 01, 2009 | Washing Machines

1 Answer

Maytag A612 washer washes, but will not drain


Replace the lid switch. Open the control console and find the lid switch in the center of the console.

Jun 30, 2009 | Maytag Washing Machines

1 Answer

Need to replace Lid Switch for Maytag Atlantis 2002 Washer


Hello, I can help you.


Let me explain to you how the Maytag washer lid switch works.
The lid switch is located on the controls panel, and is activated by opening and closing the washer door. The purpose of the lid switch is to prevent the washer from working with the door open.


It is a safety device to prevent the user from sticking their hands inside of the washer while the washer is agitating or spinning.


When the washer lid switch stops working, the result could be that the washer won't wash, drain, spin and in some cases the washer will not work at all.

You will need a multimeter to check the internal contacts on the washer lid switch.


You will also need to use the wiring schematic to see what contact should be close when the lid switch supposed to be on.


You will need to remember that the Maytag washer lid switch is one of the first parts that you will need to check, when the washer don't want to start filling, agitating, draining or spinning.

Jun 13, 2009 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Maytag atlantis washer


hi thanks for the question you say you activated the washer with screw driver . is the striker on the lid there ,.you could have a broken striker. check that if its there . replace the lid switch the appliance doc

Sep 28, 2008 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Maytag Performa washer dead.


Your door lid has a switch that makes these functions work.First open the lid and look at the right side of it.Does it have a arm on it?If it does follow the direction where it is going to hit and now listn closely while your lifting the door up & down at this contact  can you hear it click?If its not clicking  or the arm is broken  off the lid replace  the lid switch/or the broken lid switch arm.

Apr 28, 2008 | Maytag Performa PAV2200

Not finding what you are looking for?
Whirlpool Ultimate Care II LSQ9564J Top Load Washer Logo

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...