Question about Office Equipment & Supplies

Open Question

Printhead carriage jam on Kodak Office Hero 6.1 printer

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 111 Answers

SOURCE: Printer keeps saying carriage jam

I hate to state the obvious, but maybe your printer has a carriage jam. Fortunately, HP.com publishes a web page that can tell you how to clear the problem:

Carriage Jam Document

Good luck.

Posted on Oct 10, 2008

  • 3 Answers

SOURCE: How do you remove the printhead of a Kodak EasyShare 5300 printer?

Clarification: Remove tanks(cartridges)first. You see the bullseye target with a finger pointing to it.
Above the bullseye sticker, there's a rectangular button. Press it in until printhead dislodges.

Posted on Sep 18, 2008

  • 19 Answers

SOURCE: Kodak printer

Hi Tammy,

Installing the print head is really easy. Actually, it just snaps out and the new one snaps in. The key is where you press on the print head to do this. If you go to the following URL you will see how to accomplish this. Go to:

http://www.kodak.com/global/plugins/acrobat/en/service/manuals/AiOPrinters/5300AiOPrinterUG_EN-US.pdf

This shows you how to change the print head in a 5300 model. It is similar to the others as well.

If this does not work for you. contact the 800 421 6699 number and ask them to walk you through installing the print head. It will only take a couple of minutes.

Best regards,

Ron Baird
The friendly Kodak guy

Posted on Oct 13, 2008

  • 1 Answer

SOURCE: Kodak ESP 3250. Error 3527. I put new ink

Contact Kodak. I think it's the batch of printers that were made around this time. I just contacted them (mine is the same age and I'm getting the same error), and they are sending me a new printer.

Posted on Mar 09, 2011

  • 186 Answers

SOURCE: my kodak esp 7200 series

Open the printer access door and clear any obstructions. Check that the printhead and ink cartridges are installedcorrectly. (The printhead and ink cartridges are installed correctly when youhear them click into place.)

Posted on Apr 17, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kodak esp 2170 carriage jam problems


The carriage operation is not synchronized. It will have to be adjusted to normal

Aug 14, 2016 | Kodak ESP Office 2170 All-in-One Printer

1 Answer

Printhead carriage jam no obstruction found


blow out with a dust remover canister or by compressor.

Jan 23, 2016 | Kodak HERO 7.1 PRINTER

1 Answer

How to remove print head on a Kodak ESP 5250


If the ink cartridges and printhead are already in the printer, remove them, then reinstall them.
  1. Remove the color and black ink cartridges.
  2. Remove the existing printhead by lifting the latch in the center of the carriage. printhead_removal.jpg p342_0064aa.jpg ESP 3, 5, 7, 9, 3250, 5250, 5210,
    ESP Office 6150, 7250, 9250;
    HERO 7.1, 9.1, OFFICE HERO 6.1 ESP 1.2, 3.2, 3.2s, C110, C310, C315,
    ESP Office 2150, 2170;
    HERO 3.1, 5.1
  3. Close the printer access door.

Oct 21, 2014 | Office Equipment & Supplies

3 Answers

Print head jam


Check the LCD on your printer control panel or the status monitor on your computer for an error message. If there is an error message, follow the instructions to clear it.

If there is no error message, or if the problem continues:

  1. Open the access door.
  2. Disconnect the power adapter from the back of the printer.
  3. CAUTION: Do not use force on the printhead carriage to move it. Gently move the printhead carriage from side to side to see that it moves freely and there are no obstructions.
  4. Remove any obstructions that may prevent the printhead carriage and ink cartridges from moving to the center position.
  5. Close the access door.
  6. Connect the power adapter to the printer.
  7. Remove the ink cartridges from the printhead.
  8. Verify that the labels on the ink cartridges are intact, and that the cartridges are not damaged.
  9. firmly until you hear it click into position.
    black%20ink%20cartridge_generic.jpg
  10. Insert the color ink cartridge into the printhead, then press down firmly until you hear it click into position.
    color%20ink%20cartridge_generic.jpg
  11. Close the printer access door.
  12. Press OK to clear the error.
  13. Make a print.

May 06, 2014 | Kodak Office Hero 6.1

1 Answer

Why is printhead suddenly slamming to the left?


Just drip a few drop of oil on the carriage rod. This might solve the problem.

May 03, 2014 | Kodak ESP Office 2150 All-in-one Printer

1 Answer

Clearing Code 3527 from Kodak Hero 9.1


Hi friends,
I was able to solve this problem (error code 3527 on Kodak hero 9.1) by opening the printer entirely (dis-assembled), Checking the cartridge carriage assembly, i discovered that the belt that drive carriage assembly had a locker that was broken as such, the carriage assembly could not move in the direction as the motor drives the belt on.
I simply inserted the belt in position and drop a little drop of super glue to it, let it dry off.
Assemble my printer, and it was ok and is working.

Aug 01, 2012 | Kodak HERO 9.1 All-in-One Printer with...

1 Answer

Printhead for office hero 6.1


I replaced black ink cartridge and now no matter how many times I clean/calibrate only the black ink messes up. I tried other brand new cartridges and same thing. Even a calibrate shows missed lines or faded lines

Jul 07, 2012 | Kodak Office Hero 6.1 All-in-One WiFi...

1 Answer

Code 3527 Printhead carriage jam on Kodak ESP 5210 All in one


the only thing i can think off is there is a problem with the head sensor, the heads move back and forth on a rigid belt but the head case also runs along a see through plastic strip, this has lines in it and tells the printer were it is, other thing i can think of is the head cleaner, they can get stuck in them sometimes and cause misalignment and damage the reader. also anything they like to use on printers is a inc use chip that can make faults come up so you have to buy a new printer. this has been in a few articles. business printers don't have this feature. hope this helps

Jun 05, 2017 | Office Equipment & Supplies

1 Answer

Paper jam press ok to fix-then I get error code 3820



To resolve this error:
  1. Open the printer access door.
  2. Disconnect the power adapter from the printer.
  3. Gently hold both sides of the carriage, located immediately behind the printhead, and make sure the carriage moves freely.
  4. Remove the printhead and ink cartridges.
  5. Reinstall the printhead and ink cartridges, making sure each clicks into place.
  6. Connect the power adapter to the printer.
  7. Turn the printer on, if necessary.
  8. Close the printer access door.

If the error continues, contact Kodak.

Sep 24, 2010 | Kodak ESP 5 Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...