My toshiba e-studio281c is splaying call for service e207

for e207 model, error code should be in C44, F14, and etc...
Assume your error is C43, check the fuser thermistor, clear the error using 08-400 = Any value => "0"

Replacement Parts for Fitness Exercise Equipment at SPORTSMITH

E207 is an error indicating "Moderate Motor Overcurrent". This occurs when either the user is out of the maximum weight range or there is excessive wear on the deck or running belt. The following link will take you to the parts and other information we have available on the club track.

Stairmaster Quinton Treadmill ClubTrack 612 612 Parts SPORTSMITH net

Check and make absolutely sure your paper guides in the trays are closed (tight against paper)

Try cleaning the pick up assembly! It's going bad...Or have it service by a Tech...

jus submit your IMEI number to http://www.theunlockarena.com/alcatel-ot-e207/rs13wp9/ and they would send u with the NCK codes

08-251 reset to "0"

I think I only have a suggestion that may solve the issue. Try assigning Static IP to the Printer. Also, updating the drivers may help.

CreativeTECH

assumed that u connected the e207 to a pc via usb cable.
U need to have the Viewer 2 cd.
Install the printer

You need to set your PC video resolution to the monitor native resolution which is 1680x1,050@60Hz

1. Try to use an external monitor. Possible problem on the LCD.
2. Try to reinstall the graphics driver.
2. Do a recovery as the last resort.