Question about Soyo Flat Panel Televisions

Open Question

Soyo 37inch flat screen tv stuck in burn test mode

Somehow my tv got stuck in that burn test mode and wont respond to remote and only shows a blank screen that changes colors every 10 seconds.i was trying to work the remote for my dvd player and it ended up changing the tv to that factory setting mode.i have not been albe to get any response from the tv batteries in the remote and everything.

Posted by on

6 Suggested Answers

  • 192 Answers

SOURCE: Sony KDL 46V2500

This set does have a video problem. If it was bought locally, then, the retailer may have a 30 day return policy. If bought online or cannot be returned, then, contact Sony, for a service center in your location: Either way the set is to new to have a problem and you should get it resolved as soon as possible.

Posted on Aug 05, 2007

  • 159 Answers

SOURCE: Toshiba TV fails to recognize HDMI input

If the tv does all those symptoms but after some seconds the tv works and stays doing the job. THen the tv has a slow microprocessor to recognice the different resolutions or video inputs.

But if the tv cannot do anything and stay aout of signal forever. send the tv to the waranty. (no waranty? you have to use the component input instead to have digital signal reproduced

Posted on Apr 24, 2009

  • 1187 Answers

SOURCE: my plasma, lcd tv only shows in black and white

Would you say say the color is intermittent, sometimes black and white an occasionally flashes streaks of color? The small signal board may be at fault. You can ask to have the board replaced or fix it at the component level. Parts for the board at component level could be PN#823827736071 location 1H00, this is i beleive a color crystal, and two capacitors , PN#223886975478, location #s are 2H08 and 2H09. This repair is very prettymuch the repair you will need. Theses are surface mount parts and will require a tech to do. Hope this will give you a good start for repair!!!!!

Posted on Oct 19, 2009

  • 8 Answers

SOURCE: Remote not working anymore for my LG 42PQ20. Ive tried changing

call LG if you think the TV is not accepting the signal from the remote the TV may have a fault in it. If you have any universal remotes try programing them to control the TV if they work but the other does not it is remote.

Posted on Mar 15, 2010

  • 1 Answer

SOURCE: Channel changes automatically

my panasonic TC-21S15R tv some time auto channel change and blue screen.

Posted on Apr 21, 2010

  • 8457 Answers

SOURCE: Our remotes suddenly stopped working.

Tries take the remotes aparts.Take some Q tips soak it with some rubbing alchahols.Clean the PCB circuits board and the rubbers films between them might help,could work after do the cleaning.Not,than sorry ur remotes CPU probally it shorted and dead.That why the remotes not functioning any more.

Posted on May 24, 2010

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


1 Points

Related Questions:

1 Answer

My Soyo TV sudenly wont turn on, complete black screen, no sound.

enciende despues de cambiarle los filtros de la fuente ppero tengo rayas en la parte de el horizontal que tengo que n hacer y remplazar tendran ustedes los repuestos

Jun 01, 2010 | Soyo DYLT032D 32 in. LCD Television

1 Answer

Remote control

Be sure to check all your menu settings for the remote control function. Shake the remote a little bit if you hear some rattling inside then its broken. It could bee the IR eye that's has developed a problem with-in the remote or the tv itself. Try a universal remote to see if its the tv or the remote that's not responding.

Nov 03, 2009 | Soyo DYLT032D 32 in. LCD Television

1 Answer

Blank screen;no picture, no sound

I have a philips universal remote changed batteries now the codes lost

Aug 06, 2009 | Soyo DYLT032D 32 in. LCD Television

1 Answer

Soyo 32" tv -- says "no sync"?

change your source input to the correct video source you are using

Feb 23, 2009 | Soyo DYLT032D 32 in. LCD Television

1 Answer

Soyo Flat Screen TV Sound or Volume control is stuck

Hi deborah card, Lets first make sure your remote is not causing your problem, Look at the light (led) on the remote, is it lit and pulsing? If not you are having a problem with the control panel,  Have you recently cleaned your tv with a liquid? If so you will need to dry the panel with a hairdryer, unplug the power from the tv, put it on low heat and hold it about 6 inches from the panel for a few minutes. With the tv still unpluged press all buttons on the panel a few times then plug back in and try it.  Let me know if this helps and please rate this solution.   lone99star

Jan 11, 2009 | Soyo DYLT032D 32 in. LCD Television

2 Answers

Bell express vu remote codes for soyo tv

1 - Hold the clear tv buttom until all 4 light flash red
2- Press the red tv buttom
3- Press the amount of time needed on the up cursor ( around select buttom) until your tv shut down
4-When the tv goes off press the search buttom ( at the end on the right side )
5-Press record

Then u can use the red tv buttom to control ur tv and u can control the volume on satelitte mode without going back to tv mode , if u press too much time while searching the code and the tv wont light back , do the same thing but instead pressing the up cursor press the down one to go back on the code it will be faster .

Jan 02, 2009 | Soyo Crystal DYLT032B 32 in. LCD...

1 Answer

Remote codes

Then you go by the UL listing code and search online to see what other manufacturers make it.


Feb 10, 2008 | Soyo Onyx DYLTO32D 32 in. LCD HDTV

1 Answer

Remote codes

whats the code for the soyo tv universal remote

Dec 29, 2007 | Soyo DYLT032D 32 in. LCD Television

1 Answer

26PF5521D wont show menu after reseting factory defaults

Switch the TV to analogue mode (if possible)

Press and hold the "MENU" button on the side of the TV. The settings menu should appear. Continue to hold the menu button until this menu disappears. (If you let go before the menu disappears, start again)

The TV should now go blank for up to 2 minutes, and then revert to factory settings and intitial installation screen.

Procede as per original installation.

Oct 26, 2007 | Philips 26PF5521D 26 in. HD-Ready LCD...

1 Answer

'F' displaying on screen and remote not responding.

Excavated with Google from Philips website: " When a letter F appears on the right hand corner of the screen it means the television is in factory mode. To exit from factory mode, press the 'VOLUME -' and ?CHANNEL -? buttons on the TV set simultaneous for 5 seconds. " Hope this helps Michael Junge

Aug 04, 2007 | Philips 42PF5521D 42 in. HD-Ready Plasma...

Not finding what you are looking for?
Flat Panel Televisions Logo

Related Topics:

135 people viewed this question

Ask a Question

Usually answered in minutes!

Top Soyo Flat Panel Televisions Experts


Level 3 Expert

56925 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Soyo Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides