Question about GE Single Serve Blender
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: the jar of the ge
Most likely the problem is caused because the base is not screwed all the way on to the jar. This could be from just not turning it on all the way or it could loosen while running. Make sure the base is tightly closed before putting is into the power unit. To remove it you can lubricate the tabs with some vegetable oil and then force it. GE service suggested that. I have heard of two people joining forces to get it off without apparently damaging it but no guaranty's. If you have the reciept it should have a two year warranty, at least mine does.
Posted on Dec 27, 2010
I had the same issue. i took the gasket from the other blade to use with the blade i use everyday. one trick is, don't remove that gasket to clean it but make sure it stays in there. Just soak it and scrub it good, to make sure it stays seated in there.
If the gasket comes loose while you are grinding, the lid will come loose in the base and sometimes causes you to not be able to get the jar from the base. you have to turn the jar the opposite direction to get the lid to tighten up, then you can remove the jar from the base.
I am trying to get replacement jars since those plastic nobbies that run the blender have broken off. It is down to one of 3 nobbies, so it can't be run anymore. I mght just have to buy a brand new blender but it seems so wasteful.
Posted on Jan 28, 2012
Tips for a great answer:
Jan 14, 2018 | GE Blenders
Jan 01, 2017 | GE Blenders
Aug 23, 2016 | GE Blenders
Jan 31, 2014 | NINJA Blender with Single Serve Accs BL660
Jun 21, 2013 | Back to Basics 600 Smoothie Plus Work Top...
Jan 19, 2013 | GE Blenders
Jun 03, 2012 | GE Blenders
Mar 15, 2011 | GE Blenders
Dec 01, 2010 | GE Blenders
24 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: