Question about Sewing Machines
Turns on, lights up, but doesn't run with foot pedal. Used another foot pedal, and same thing, so I don't think that is the problem.
It could be the plug in on the machine that that needs to be checked
Posted on Oct 11, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Hi , the pedal micro switch are stuck , you may visit fixya repair service just , (enter zip area), you can find sewing machine repairman near you
Posted on Feb 22, 2008
If you can get acess to or borrow another foot pedal to try I would do this first any of the Activa, Artista range fit to try. The fault may not be in the foot pedal but in the main CB of the machine. This can give a fualt of lights on but no motor drive. In this case the board would need replacing by a technician. Hope this may help.
Posted on Jun 23, 2008
Use a magnifying glass to see if the little hook in the needle threader is bent so that it is not going through the eye of the needle. You might be able to gently bend it back with tweezers.
Make sure that your needle is in the upper most position when you try and the presser foot is down.
Posted on Mar 17, 2010
You can fit any foot control providing you only have two leads coming from the control, you should be able to get a replacement Bernina control on www.sewingonline.co.uk/instructions
Posted on Mar 24, 2010
Tips for a great answer:
Mar 17, 2015 | Sewing Machines
Oct 15, 2014 | Bernina Activa 130
Feb 27, 2014 | Bernina Activa 130
Aug 17, 2012 | Bernina Activa 130
Mar 02, 2012 | Bernina Activa 140
Aug 22, 2010 | Bernina Activa 130
Mar 02, 2010 | Sewing Machines
Jun 11, 2008 | Bernina 1008
63 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: