Question about Radio Communications

Open Question

I've a Vintage EDISON VOICEWRITER VPD-3 with no power cord or mic- and have opened it up and there are many wires. I can't find to much info on the net telling me what wires do what- or even a schematic -which would be very helpful. Can anybody tell me which wires do what- or how to obtain a schematic photofact?

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 4234 Answers

SOURCE: Nad C350 schematic or service manual required

I don't know of the availability of the schematics outside of service centers. Is there a specific problem? I have access to the service manuals but can not by contract send them out.
Dan

Posted on Jul 15, 2008

Shuttle83
  • 1139 Answers

SOURCE: Internet connection failed but IP address obtained.

Hello,

Check to make sure that your router has gotten an IP Address from your ISP. Because you PS3 is telling you that it has an IP from your router. This means that the Router to PS3 connection has layer 3 connectivity, but what about from your router to your ISP? check that in the router by logging into the router's web page and going to the status page it should have your information from your ISP if it does not make sure that the main page is set to the proper settings either get IP automatically (Cable Modem) or Get PPPOE (DSL) connection (Make sure that your password information is correct to).

Now after checking these items make sure that you set the router up as the DNS for your network buy setting this on the status page then in your PS3 (set the DNS setting to point to your router, and set your router up as a caching DNS server).
Then power cycle the router after saving everything, and power cycle your PS3 after setting everything. This should clear up your problem.

Thank you,

Shuttle83

Posted on Oct 24, 2008

clyde2j2
  • 137 Answers

SOURCE: I need a manual for a vintage Hamilton Beach 40 DM

Try this URL:
www.instructionmanuals,com

Posted on Mar 02, 2009

Healeyman
  • 1198 Answers

SOURCE: Electrical wiring

The green is the safety ground, it goes to a contact that is directly connected to the body of the dryer. A dryer cord is usually a flat thing with the wires that have lugs crimped on them. Usually the power wires are black, and the neutral wire is white. It's usually difficult to put it on wrong, so if it goes easy, it's probably right.

Posted on Apr 27, 2009

  • 39 Answers

SOURCE: explaihow to wire a turner +3 mic to a president washington base

Here you go 1/shield 2/white 3/black 4/red . Good luck......Dan

Posted on May 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Answer to Terry Hair - cat. 280 RA77, ser. 38 80A, GE Hotpoint electric range/stove/oven


You weren't kidding when you said Vintage! I was thinking maybe 1950's. What you have is purely antique! I doubt you will easily find anything for something that old. There are a few websites online that cater to antique and vintage appliances. Some have forums where you can request info. You might fare better there.

Nov 07, 2015 | Hotpoint EDISON GENERAL ELECTRIC APPLIANCE...

1 Answer

How do I wire a tuner plus 3 mic to a vintage realistic trc 458 cb radio ?


Hi Carl, I found 2 different hook-ups so I will list them both. You can check them out according to the wire colors you have in the mic cord. First one and this may be for a turner mobile mic. ;
Turner
1- Shield & Red
2- N/C
3- Blue
4- White
5- Black
Yellow NC

This one is out of the Turner book but they did not list your radio exactly. This is the most popular hook-up for Realistic's.
Code E;
1-S
2- N/C
3- Bk
4- Wh
5- Red
Hope this helps, Mike

http://www.cbtricks.com/mic_manuals/turner/turner_mic_wiring_book.pdf

Oct 29, 2015 | Radio Communications

1 Answer

Where do I find parts


Try any small appliance repair and parts depot.

Oct 04, 2014 | Toastmaster Vintage Mcgraw Edison Waffle...

1 Answer

Got a Cobra 21 XLR with a power mic. Where can I get a power cord or harness?


copper electronics .com or go to radio shack and buy one of theirs and some heavy duty wire and make up your own . Pick up two fuse holders and connect them to the pos and neg to make power done right.

Aug 21, 2012 | Cobra Vintage 21 Xlr 40 Channel Cb Radio...

1 Answer

How to wire an Altec 6369A Microphone


This was the only Altec mike I could find:http://www.altecpro.com/pdfs/vintage/SpeakerAndMics/mics/D91P%20Microphone.pdf It might resemble what you have.You might also try contacting someone here:http://www.altecpro.com/products/vintage/index.htm#mics Let me know if this helps.

Nov 26, 2009 | Altec Lansing Audio Players & Recorders

1 Answer

The wiring has snapped from the mic to the xlr socket on the microphone is there somewhere i can get a diagram to fix it? the mic is a se electronic z3300a


It uses a standard balanced XLR wiring which is 1= ground/shield, 2= (+ve) hot and 3 is (-ve) cold. Do not bridge pins 1 and 3 as this mike uses phantom power. Please let me know if this helps.

Nov 18, 2009 | SE Electronics Z3300a Professional...

1 Answer

I just purchased a MXL 990 condenser mic. I am pissed. I get home and hook it up to my Toneport UX2 and turn phantom power on and I literally get nothing. I don't get it.


Phantom power comes in different voltages. Make sure your power supply is delivering enough. Also make sure that your mike cable is wired properly. 1 is ground or shield. 2 is hot or Ve+ and 3 is cold or ve- If 1 and 3 are bridged for unbalanced use or if you have a short it won't work and will probably damage the mike or the power supply. I think the power supply needs to be 48 volts and you have to use the stereo XLR cord that is recommended for it. I hope this helps.

Jul 10, 2009 | MXL 990s Professional Microphone

1 Answer

Correct wiring for a ASTATIC TEARDROP MIKE to a RANGER RCI 2950DX


here is the info you asked for the following is the correct wiring.


Mic Wiring Info
Stock Mic Wiring
1. Ground Shield
2. Audio Yellow
3. Transmit Red
4. Receive Black
5. CH. Up White
6. CH. Down Blue
Turner 4-Wire MIC. Wiring
1. Ground Shield
2. Audio White
3. Transmit Black
4. Receive N/C
5. CH. UP N/C
6. CH. Down N/C

Turner 6-Wire MIC. Wiring
1. Ground Shield & Red
2. Audio White
3. Transmit Blue
4. Receive N/C
5. CH. UP N/C
6. CH. Down N/C

Astatic 4-Wire MIC. Wiring
1. Ground Shield
2. Audio White
3. Transmit Red
4. Receive N/C
5. CH. UP N/C
6. CH. Down N/C

Astatic 6-Wire MIC. Wiring
1. Ground Shield & Blue
2. Audio White
3. Transmit Red
4. Receive N/C
5. CH. UP N/C
6. CH. Down N/C

Mar 11, 2009 | Connex 3300 240-Channels Base CB Radio

1 Answer

Mic hum


Yes, the wiring is different. Reverse the wires on pins 1 & 2, then reverse the wires on pins 3 & 4.

The wiring for you radio's mike is:

1- Audio
2-Ground (Shield)
3-Receive
4-Transmit

Depending on the vintage of your mike, the colors Uniden uses for these functions are white or yellow for audio, red is transmit & black is receive.

Jul 31, 2008 | Superstar SS-121 120-Channels Base CB...

Not finding what you are looking for?
Radio Communications Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1646 Answers

Brad Brown

Level 3 Expert

15478 Answers

Mike Charette

Level 3 Expert

1795 Answers

Are you a Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...