Question about Garden

1 Answer

To wadembly@aol.com i have a problem with a 12.5 briggs inteck mod219907 type0131E1 code070323ZA it has a battery start and a pull start. It will start with the battery on the first turn but won't start with the pull start. It has a nikki carb which I cleaned,put in new plug got good blue fire at mthe plug it;s got fresh gas. The owner said he heard a pop and it died now it won't start at all with the pull start. It started before with the pull start. H doesn"t want the battery start but the old battery is still in it he can start it with the batt. charger on start with the. You helped me before THANKS. snor38@gmail

Posted by on

  • Ron Sanders
    Ron Sanders Oct 11, 2013

    Sorry that didnt help.nothing is changed it started with the rope about 4 days ago. It will start just fine with the charger on it but it won't start with the pull rope. I cleaned the carb twice plus the emulsion tube the inside of the carb was pretty clean. I put it back on started it with the charger on the battery, and got it adjusted . IT starts just fine and runs great off the charger, but wont start with the pull rope.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 416 Answers

Could it be you just arent pulling it fast enough
is the rope the propper lenghth or has it been shortened up?

Posted on Oct 10, 2013

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
wireguy212
  • 1627 Answers

SOURCE: john deere 425 mower won't start

The ignition switch module is likely to be the problem,they seem to quit for no good reason.The safety relays and fuses are built into the board that comes with the switch and will most likely fix your problem.

Posted on Apr 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 2008 la 115 john deere riding mower. It won't start in less I put a large screwdriver on the solenoid. the fuse looks good as well. I replaced the ignition switch and solenoid too.


When you try to turn over engine with key it turns over slowly and stops? It acts like starters not working properly? If this sounds like it and it's a single cylinder Briggs and Stratton engine ohv's your valve specs are off they need to be checked and adjusted every 200 hrs. If you need further assistance let me know. Wadembly@aol.com or call 831-578-4034 pacific standard time ( California)

May 18, 2015 | John Deere Garden

2 Answers

I have a inteck briggs motor on a snapper 30inch mower it has a battery start and a pull rope start it has startd with 2 pulls as the battery is over a year old thts why i have been using the pull start....


test the battery
if it is under 12v as normal change it; 10v is one dead cell. 8v is two dead cells etc.
if it is not able to hold a charge the engine wont start even with the pull start due to electronics not firing at under 12v
that is probably why it starts with the charger hitting it with 14-18v

Oct 10, 2013 | Garden

1 Answer

Have a 12.5 briggs Inteck engine its an ohv mod219907 type0131E1 code070323ZA with electric start and a pull start. It will start with 1 turn with the electric start but won't start with the pull starter. ...


I have seen Inteck engines to be very sensitive to valve clearance. IF it is a few years old try adjusting the valve clearance exactly as shown in the manual. The electric starter may give it just enough kick to make the difference.

Oct 10, 2013 | Computers & Internet

1 Answer

How to adjust valves on briggs and stratton 18.5 h.p. Vtwn inteck lawn tractor


Go to youtube.com On the line write adjust valves b and s 8.5 hp intek Then watch the video.

Sep 15, 2013 | Briggs & Stratton Garden

2 Answers

19.5 Briggs & Stratton dies while mowing


the engine is getting to hot or the oil level is to low check to make sure the engine is getting the air that it needs while running they have air vents in hood as well as on sides of most of those tractors or i would mow for a while & put in a cool place to cool down if i can further help e-mail me wade at wadembly@aol.com

Jun 28, 2009 | Craftsman 42 in. Deck 19.5hp Lawn Tractor

1 Answer

Will not start when you pull cord it doesn't seen to catch


whats not catching the rope coil to the flywheel let me know at wadembly@aol.com thanks wade

Jun 08, 2009 | Garden

1 Answer

Where do i hook my replacement cord that turns on my blades


the belt runs through all the pulley on deck & a pulley on the bottom of engine if you need furthe help e-mail me @wadembly@aol.com thanks, wade

Jun 07, 2009 | Poulan 42-Inch Steel Deck 17.5 HP Briggs &...

1 Answer

Murray Riding Motor Running but not Starting


does it have spark & gas let me know at wadembly@aol.com thanks,wade

Jun 07, 2009 | Garden

Not finding what you are looking for?
Garden Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garden Experts

Dennis Key
Dennis Key

Level 3 Expert

2478 Answers

roeb

Level 3 Expert

540 Answers

john h

Level 3 Expert

12650 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...