Question about KitchenAid Dishwashers

Open Question

Kitchenaid dishwasher kud1021rbl1 - the start button, cancel button and 4 hour delay button do not light up when pressed and the dishwasher will not turn on. the other buttons light up when pressed.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 76 Answers

SOURCE: dishwasher won't start

jamcdani Most likely the problem with your dish washer is bad key pad. It is not repairable and has to be replaced. Whirlpool does not sell it separate and you have to by the whole console assembly. The price range is between $95 and $115 (different colors) and it is not very complicated to replace it. I can help you with the complete step by step instructions and, if you provide the complete model number of your dish washer, I get the part number and the best price for you. Gendos post back...

Posted on Jun 29, 2007

Ad
  • 1 Answer

SOURCE: Kenmore dishwasher Lock On light flashing

holding the button for four seconds will not do it, you have to hold it until the light stops blinking and
will go back to normal, normall takes more than four seconds to unlock the unit, this is something
the sears repair techs know becouse the are trained on all this things but, they will not share this things, becouse thats how they make money

Posted on Apr 18, 2009

  • 3 Answers

SOURCE: My normal cycle and cancel button lights are

Probably a keypad gone bad. Try replacing the keypad.

There is a troubleshooting guide behind the foot kick panel. It gives a sequence to test for a bad keypad. You can try that sequence to be sure.

Posted on Apr 27, 2009

  • 56 Answers

SOURCE: the light on the buttons that say cancel and normal are flashing and the dishwasher won't turn on.

first thing to try is to disconnect power for 15 minutes and then try again if goes into default again take off bottom panel and behind the black trim will be a tech sheet see if it gives yousome diagonostics sounds like it may be the computer if the power off and on doesnt make it work,.

Posted on May 31, 2009

erpaalai
  • 999 Answers

SOURCE: kitchenaid KUDS25SH

Hold the button down until it beeps and the light goes off. Eric

Posted on Sep 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Model ESL 499. Why doesn't it start?


You have activated the delayed start function. Please read following instruction from user manual.

8. Delayed Start button

Allows the start of the programme to be delayed by a minimum of 1 hour, up to 9 hours. How to set the delayed start When the button is pressed, the number appears in the display (4). Press the button again to select the number of hours by which you wish to delay the programme start, up to a maximum of 9. E.g.: if you have selected number , the wash programme will start in 2 hours' time. To cancel the delayed start set, press the button until the number appears. Close the dishwasher door to start the countdown: a long audible signal (about one second) informs you that the function is active. If you open the door again you will see, in the display (4), how long there is to go (in hours) before the programme starts. A flashing dot in the digital display means that the delayed start function has been activated. Opening the door has no effect on a countdown which has already been started. If, during the countdown, you wish to see the programme number selected in the display, press the Programme Selector button (5). If, after having started the countdown by closing the dishwasher door, you wish to cancel the delayed start, press button (9) (Cancel) for about 2 seconds until the short «instruction accepted «signal is heard».

Dado

Sep 16, 2015 | Electrolux Dishwashers

1 Answer

Frigidaire FFBD2406NW0A then clean wash drying and 4 hour led lights are blinking


I appreciate your post, friend!

I understand that the clean, wash, and dry buttons on your Frigidaire dishwasher are blinking along with the four LED light. This appears to be a delay start cycle. I would recommend pressing the cancel button. If that does not clear the lights you can perform a reset and to do that you would need to disconnect power from the dishwasher for roughly ten minutes. I hope this is helpful. -Matt

Feb 20, 2015 | Frigidaire Dishwashers

1 Answer

Purple light is on and cycle won't start


It's possible that you have put the dishwasher into delay mode. Try powering off at the powerpoint as this will force a reset of all programming.



The pause/start button also sets the Delay Start feature which can delay the start of a wash program
from 1 to 12 hours.


To cancel Delay Start
Press the I button.

Dec 30, 2012 | Fisher and Paykel 23 in. DD-603SS Built-in...

1 Answer

Dishwasher ran all night still not finished. Error code 4H displaying.


Hi and welcome to FixYa. I am Kelly. The 4H is indicating your dishwasher is in the delayed wash start mode. Here is some information from Sears about what to do:


  • The number letter combination indicates that the dishwasher is in a "Delay Start" mode, as well as how many hours were set for the delay start.
  • The dishwasher will not start the wash until it reaches the delayed hour that it was set for. Example: 1H = 1 hour delay start, 2H = 2 hour delay start, etc.
    • To start the dishwasher immediately and not wait for the Delay Start time, cancel the "Delay Start" option, by pressing the Cancel button. Then program the cycle and options and press Start.
    • To start the dishwasher after the Delay time, select the cycle and options desired. Select the "Delay Start" option and on some dishwashers it requires, pressing the Start button.
    • Some dishwashers will display a countdown of the delay time on the display.
Note: Refer to the Owner's Manual or Use & Care Guide for specific instructions on using the "Delay Start" feature.

If you need more assistance we will need your exact model number in any of your future responses.
Thanks for choosing FixYa,
Kelly

Jan 04, 2011 | Dishwashers

2 Answers

My frigidaire dishwasher model #fghd2433kf1


It is in a delay wash mode.
Disconnect power for 60 seconds.
Re-connect power.
Press the Cancel button.
Press the regular wash cycle and start the dw.

Jul 17, 2010 | Frigidaire Dishwashers

1 Answer

Electrolux dishwasher delays before starting


  1. To cancel the delay.press the delay pad again when the delay is counting down. The indicator light will go out and the cycle will start or resume immediately.
  2. To cancel the delay and the cycle, press Start/cancel once to drain and turn-off the dishwasher.
  3. Press Start/cancel twice to turn-off the dishwasher without draining.

Aug 31, 2009 | Electrolux EDW5505ESS Built-in Dishwasher

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top KitchenAid Dishwashers Experts

Mike

Level 3 Expert

4339 Answers

Cindy Wells

Level 3 Expert

5124 Answers

yadayada
yadayada

Level 3 Expert

76070 Answers

Are you a KitchenAid Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...