Error usb002 - Canon Office Equipment & Supplies

issue with registry uninstall the driver remove the entries from registry . reboot the system try again

skype id :johnwalker800969

usb002 problem canon ip2700

Thanks for all answer

goo.gl/FBSCqW

You may need to reset your printer by software.
To reset your printer jast go to:Use ip reset software:
http://serviceprinter.wordpress.com/2008/03/26/ip-tool-canon-resetter/
Download canon ip 2600 printer resetter.
Run it on your pc.
And try to reset your printer with the resetter.
Thank you.

To walk you through I'd need to know the OS you are running, but the generic answer is that you need to go into the print driver, and in the Printer Properties, under the ports tab , select the USB002 port rather than the DOT4 port and Apply the changes.

Hello,
Since you changed from Wireless to USB I would recommend either reinstalling or selecting "add a printer" and allow the computer to automatically add the local printer.
Thanks,

u have change plug in on onther usb try to install

any earror is coming

well..either they are there, or they are not. most likely listed among the USB items at the bottom, instead of with the printer ports..if not, open control panel system device manager, and do a 'scan for hardware changes'

that should do the trick.