Question about Office Equipment & Supplies
I am trying to print via wi-fi direct, and it gives me:
SPL ERROR -Please use the proper driver
VERSION SPL 5.73.04 06-10-2014
ERROR CODE 11-1113
Posted on Jan 25, 2016
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: CLP-510 SPL-C Error message
SPL stands for "Samsung Printer Language". You are using an USB cable that is either too long (above 6 ft.) or too thin (cheap cables).
The reason why the test page prints is because it is a very simple and small page (thinking on kbyte terms). But larger streams of data do not arrive correctly due to attenuation and the error page prints instead.
If it is absolutely necessary to connect beyong 6 ft, you need either a good quality USB cable (try the Belkin brand found at OfficeMax), or connect using a parallel cable.
Posted on Nov 01, 2007
It's a printer Main Board Problem, maybe you can try to make a FW Update.
When the problem is still their after the FW Update you have to call the service.
Greetings from Germany
Posted on Sep 21, 2009
Peter 1st of all, which version of the OS you're using on your PC. download the correct driver it will help.
Posted on Apr 19, 2010
This can be fixed by stretching out a solenoid spring on the power cord
side of the printer. The solenoid acts as a clutch to stop the spinning
developer actuator at the right spot. The picture below is from a Samsung CLP-300 but these both use the same Imaging Unit so this should work. It's just a little more involved taking off the top scanner / buttonpad off the CLX-3160.
Open up the right side (power cord side) of the printer (take off top cover, then take off side cover). Then, find a solenoid (little metal square) that touches the white plastic vertical spur gear. Take the spring off the solenoid. Now, put the spring back on - only this time you will attach one anchor point to the middle of the spring as to pre-stretch the spring for more tension.
The problem is that the spring gets weak over time / the cogs round out over time and the solenoid finger is overcome by the spinning cogs, and resulting in selecting the wrong developer.
More pictures of the solenoid on Facebook:
Posted on Jul 10, 2010
SPL-C -Incomplete Session by time out
Position : 0xddde (56798)
System : src/os_hook
Version : SPL-C 5.35 11-20-2007
Any one can help me how to fix this Error please.
Posted on Feb 22, 2011
Tips for a great answer:
Aug 31, 2016 | Samsung Tablets & eReaders
Apr 29, 2016 | Samsung Office Equipment & Supplies
Mar 30, 2013 | SAMSUNG CLX-3185FW COL LASER MFC Projector...
Mar 16, 2013 | Samsung Galaxy Tab 2 7in. WiFi Tablet, 8GB
May 17, 2011 | Samsung CLP 315 Laser Printer
Nov 12, 2010 | HP LaserJet 1160 Printer
Apr 21, 2010 | Samsung CLX 3160fn All-In-One Printer
Oct 15, 2009 | Samsung CLX 3160fn All-In-One Printer
2,549 people viewed this question
Usually answered in minutes!