Question about Samsung BD-P1500 Blu-Ray Player

1 Answer

Amtrying to get free region on dvd player

"hi" got region 4 and then region 9 but nothing came up saying all region free.
have done what was requested but still nothing
what nexit???

Posted by on

  • colinandlynn Apr 23, 2009

    :hi: zohail thank you vary much for your help you were the first one to tell me about samsung my model all ready region free.
    thank you again
    colin

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,223 Answers

What do u want to do pls elaborate ur problem ?

Posted on Apr 23, 2009

  • 1 more comment 
  • Shoaib Rais
    Shoaib Rais Apr 23, 2009

    ok i understand u are getting Region locked disks error

    actually the model u mentioned in samsung it region free in Bluray disks but Region locked in DVD's so to be true there is no hack for the specific model for DVD playback , so there is no need to waste time in this i would suggest there are tricks known but they work on some regions only u can try this below


    1) Turn on the player with no disc in the tray

    Wait till the unit is at the Samsung logo screen.

    2) Open then close the tray, wait to see the No-Disc Message in the top Left Corner

    3) Now press the REPEAT button on the remote, followed by a five digit code.



    sometimes about 20 tries to get this to work, It needed to be done without delay.

    So if you don’t get it to work straight away don’t loose heart.



    4) When it works a 4 or whatever region will appear in the top left corner



    5) Press 9 to make it regionless.

    6) Press Eject to OPEN to open the disc tray.

    7) Press Eject to CLOSE to close the disc tray.



    8) Power the unit off



    9) Now power the unit on again, it should now read all regions of DVD Disc.



    From other threads I got the follow list of region codes.



    R1 - 29334

    R2 - 57538

    R3 - 56732

    R4 - 76884

    R5 - 53814

    R6 - 24462



    Pls rate me if i have Fixed or helped ur problem !! i am here to help u more




  • Shoaib Rais
    Shoaib Rais Apr 23, 2009

    also try this

    1. OFF/ON your DVD

    2. Open the tray

    3. Press 'INFO', you'll see version code

    4. Press '9' repeatedly untill you see '9' overlapped with the version code

    5. OFF/ON and enjoy!


    if no trick works first update ur firmware from samsung website for ur BD player adn then try the tricks again ok



  • Shoaib Rais
    Shoaib Rais Apr 23, 2009

    u can also try couple of Hacks here

    http://www.videohelp.com/dvdhacks/samsun...

    pls do rate me if i helped u !


×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My philips dvd hts 3545 does not play the dvd says there is no disk. it could be a problem of region code. how can i unlock the region code to make all region code


hi,
you can make the player region free by the following setup.

1.TURN ON THE PLAYER
2.PRESS OPEN/CLOSE TO OPEN THE TRAY
3.WITH THE TRAY OPEN, PRESS STOP-7-3-4-4-6-6 in sequence

4.YOUR REGION AREA WILL BE DISPLAYED.
5.PRESS "0" TO UNLOCK ALL
6.PRESS "OK"

ok

Jan 26, 2011 | Philips Televison & Video

1 Answer

How do you change the region code to europe on a philips DCP850/37 portable dvd player. I have done in once but its now saying wrong region and i cant remember how to do it. Please help


its quite easy actually

1.) Press setup

2.) select preferences to go to the preferences page

3.) enter 9 6 5 3

4) select your region

personally I set my players to 0 meaning region free ,, this means that it can player any movie from anywhere without having to setup region any more. Region free players are the best. I'd suggest you set yours to 0 as well therefore you will never have to set up your region again and u can play anything.

good luck.



Mar 02, 2010 | Philips DCP851 Portable DVD Player

1 Answer

My pc dvd drive won't let me change region back


No its not a bug most DVD-ROM computer drives allow you 4 or 5 region changes first check your region code and number at DVD Region Info it will tell you region code Australia is 4 UK is 2 sand so one plus you region changes http://www.visualdomain.net/

I however do suggest removing your region code from your DVD-ROM using a region free firmwar or on your PC you can use http://www.dvdidle.com/dvd-region-free.htm it is however a bit pricey the region 0 firmware hack would be better.

Dec 01, 2009 | Computers & Internet

1 Answer

Pioneer DV 310 K region free


Step 1) Download the pioneer firmware here http://www.pioneerfaq.info/index.php?question=Firmwares

The site says the firmware only works on region 2 players. For this model it worked for my region 4 player in Australia

Step 2) Burn this file to a CD-ROM with name PIONEER as per these instructions - http://www.pioneerfaq.info/english/burn_guide.php

Step 3) Load the CD and your DVD player with ask you to flash the firmware. It says press play to start but instead HOLD DOWN ENTER during the entire process. DO NOT switch off your DVD during this time. When the tray opens take the CD ROM out but keep the DVD on. The flashing can take up two to three minutes. During this time HOLD DOWN ENTER ON THE REMOTE. The entire time!

Step 4) The DVD player will reboot. The tray should be empty. It will then load the tray back into the player. If the signal is disorted switch on and off.

Your done! Should work.

The most complex way of region freeing a DVD I have ever endured! :)

Jul 19, 2009 | Pioneer DV-310 DVD Player

2 Answers

Setting the player to region free


Apologies everyone.......

The instructions for the DVD-P181 are actually correct as described in other posts but can be a bit confusing. Please allow me to clarify using my example;

With your DVD-P181 switched on, follow these instructions using your Remote Control;

1/ Press the <DVD> button
2/ Press <0><0><0><0><0> (this is 0, 5 times)
3/ Press <repeat> (careful not to press the <repeat A-B> button)
4/ Press <7><6><8><8><4> (ONLY if your player is currently region 4 - refer to the table below for other pre-set regions)
5/ The Region window should now appear on screen saying that your current region is Region 4 and asking what region you want to change it to.
6/ Press <0> for the new Region (0 is region-free)
7/ Press <Open/Close> button once (to open the tray)
8/ Press <Open/Close> button again (to close the tray
9/ Press <Power> button to turn the player off

Now, when you turn the player back on, you should be able to play DVD's from any region. Good luck everyone.

_______________________________________________

This table refers to Step 4. You need to choose the Region code which your machine is currently set to, to unlock the Region Menu which allows you to set the device to another region.

In my example, the DVD player was purchased in Australia is by default set to Region 4. The 5 digit number I needed was 76884.

5 digit code:
region 1 : 29334
region 2 : 37867
region 3 : 56732
region 4 : 76884
region 5 : 53814
region 6 : 24462

Dec 28, 2008 | Samsung DVD-M105 DVD Player

1 Answer

DUR-1700 Zone Free


1. Turn on the DVD player.
2. Press "Setup"
3. Go to "Preferences".
4. Press "Play"
5. Enter 2-5-1-5-3-5 (251535 in continuous sequence of keys on the remote) Nothing will show on the screen.
6. Press "Left" then press "Down"
The current region code will be displayed.
7. Press "0" for region free.

I have just done this on mine and it worked perfectly.

Regards

Oct 05, 2008 | Durabrand DUR-1700 Portable DVD Player

1 Answer

Want to play dvd's from any region. My JVC XV-S332SL/XV-S402SL DVD Player is restricted to Region 4


hi you can try this it been tested and will work if done correct we just tested this and had no problems unlocking this in the shop lol.




1. Power the player off.
2. Press and hold 'DVD Menu' and 'On Screen' on the player.
3. Power the player back on.
4. Release both buttons.
5. Press Standby. The display should now read either TEST 2, TEST 4, or TEST 6
depending on the machine's current region setting.
6. Press DVD Menu twice on the player.
7. When the display reads 000 5858 use the up and down buttons to change the
000 to 02E.
8. Using the Left and Right arrow buttons, change the last four digits until
they read 0000 for Region Free, 0001 for Region 1, 0002 for Region 2 or 0004 for
Region 4....
NB: DO NOT Use Region 20!!!
9. Press Enter on the player.
10. Press Standby.
11. Wait 5 Second.
12. Press Standby again.
Some titles may not play in region free setting. If this happens select the
needed region.

JVC XV-S332SL, , XV-S402SL,

riz.

Aug 17, 2008 | Televison & Video

3 Answers

MEMOREX MVD2040 UNLOCK CODE


This is all I could find ..... Memorex DVD-2000 C/P / MVD-2020 / MVD-2022 / MVD-2027 / MVD-2027 A / MVD-2028 / MVD-2029 / MVD-2030 / MVD-2037 / MVD-2051
  1. Open the disc tray
  2. Press CLEAR
  3. Press 1, 3, 6, 9
  4. Enter region (0 = multi-region)
  5. Close the disc tray
  6. Turn the player off
Memorex MVD-2042
  1. Press OPEN/CLOSE
  2. Press 9, 7, 3, 5 (or 1, 3, 6, 9 for the "suffix B, C, D" model)
  3. The setup menu will appear
  4. Press RIGHT to move the cursor to highlight the regions
  5. Select region using UP/DOWN (0 = multi-region)
  6. Press ENTER
    (or try the instruction for MVD-2020 above)
Memorex MVD-P1072
  1. Turn on the player (without a disc inserted)
  2. Press SETUP
  3. Press 9, 2, 1, 0
  4. Select region (0 = multi-region)

Jan 16, 2008 | Memorex MVD2040 DVD Player

5 Answers

7" LG Portable DVD Player DP271


Hi
I have tried to unlock the DVD DP271 player using following methods, But it is not unlocking. If any body knows any other code. Please help me to un lock my DVD DP271 player.

Thanks
Sekahr

1. Power up and press setup
2 Scroll down to LOCK
3 Press '0' (zero) seven times
4. A message may now appear with saying that the player is region free.
5. Power down then power up.

or

1. Remove any discs and power up the DVD
2. Press PAUSE
3. Enter 314159
4. The hidden region code menu may now appear.
5. Set code you want- 0 for multiregion, 1 for region 1 and so on
6. Press PAUSE
7. Power down then power up

Nov 02, 2007 | Insignia NS-PDVD8 Portable DVD Player

Not finding what you are looking for?
Samsung BD-P1500 Blu-Ray Player Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74383 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...