Question about Panasonic BL-C30A Network Camera

3 Answers

BL-C30A Can not access via web after a few days

I have 3 BL-C30A 's installed using a belkin wireless router F5D7231-4. I also have 2 house thermostats and a sling box connected to the router using Cat-5. The cameras work great using Viewnet, but all three quit working after in about 3 days. To allow access I need to shut the router and modem down for 4 minutes and restart. Then they work fine again. I never lose access to the sling box or thermostats and the camera addresses always appear on the router DHCP client list. The cameras are not set up with Static adresses. I have an UPS on the router and modem. Does anyone know what could be wrong.

Posted by on

  • 1 more comment 
  • megapower Sep 30, 2007

    Thanks for your time in responding, but not helful in correcting problem.

    Hoping there is somebody who has experienced simalar issue.

  • megapower Oct 09, 2007

    The problem is not fixed yet. Rather frustrating since I have done a lot with no luck. Locked in on a channel as suggested by Belkin, and tried all. Disconnected wireless phone etc etc. Somtimes it only works for 15 minutes over the net. Just does not make any sense.

    Decided to buy a new Linkys router and use with my Voip modem (have 2 modems) and I will disconnect the wireless on the Bekin where I have the cat 5 ports full. I will also use static addresses with the cameras and see if that works. This has been an expense venture since I have 4 cameras that aren't working and I am 7,500 miles away.

  • Anonymous Feb 05, 2008

    Hi Megapower . I'm having the same problem . Please help if u have solved yours . Thanks . My email is



3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Hi Megapower . I'm also having the same problem . Please tell me if u have solve the problem . My email is

Posted on Feb 05, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I think I have the same problem - the recently purchased BL-30 worked perfectly over the internet for three days then stopped. All I get now from the browser is the message:- can not estabish a connection to the server ... then my url. Megapower did you manage to solve this?

Posted on Oct 05, 2007

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,139 Answers

Your cameras are losing conncetivity because of the air link being compromised this could be due to unintentional jamming (blocking of the wifi signal)or Resetting of the beacon (beacons can be set to broadcast at intervals) They are needed for the wifi devices to know that they are still a part of the network. These are more then likely your problem

Posted on Sep 27, 2007

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

I have a belkin wireless G+ router work with a power link adapter?

Just use the unused one to create an access point.To do so you need to login on the web UI of the router and change to an access point instead of a infrastructure.

Apr 12, 2013 | Belkin F5D7330 802.11g/b Wireless Adapter

2 Answers

Do i access web-based user interface with my

u can access it via both but when its the first time, it has to be done via wired only

Jan 10, 2010 | Belkin (F5D5231-4) Router

1 Answer

How do I find my webcams ip address Panasonic BL-C30

Hi, the best and easiest way I can think of for this is to go to your wireless router and get the list of ip addresses it is sending out for your wireless connections.

Nov 02, 2009 | Panasonic BL-C30A Network Camera

1 Answer

How do I setup security on my belkin wireless router that has been installed already?

First here is the link to download the user manual in case you don't have it:
Now when talking about security, it depends on which part you want to secure:
1- secure the access to the router web interface: you can change the default password. the default password is blank so there is no password which is not secure at all.
2. secure the wireless access: you can change the WEP or WPA key used, first you will need to access to the router web interface and go to wireless security and then change the key. an other option is to filter by MAC address, so only the MAC addresses put in the list will be able to connect via wifi.
3. secure the incoming traffic: the NAT is enabled by default in all routers, but you can also add some rules for the incoming traffic.
That's very much it when talking about security of a wireless router.
If you need help to secure your router, i can work with you directly on your router and do the job via a remote control software like teamviewer.
Best Regards,

Oct 29, 2009 | Belkin (F5D7230-4) Router (587009)

1 Answer

I want to to connect 3 computers to Belkin N+ wireless router

you don't need an installation for the router on the other devices, just make sure you connect via ethernet or wi-fi (for wi--fi make sure to have a strong password for the network)

Apr 17, 2009 | Belkin Wireless G Plus MIMO (F5D9230-4)...

2 Answers

Connectivity issue router to panassonic wireless camera

If your camera does not support encryption protection then that is a problem beause it allows unauthorised people to access your wireless access point, Internet and computers on your LAN.
There is a couple of things you can do but it it is not perfect.
1. Change youe SSID to something other that the default name.
2. Make sure you put a password on your admin setup
3. Turn off SSID broadcast.
4. Set up MAC address filtering on your access point and only allow MAC address of only your devices/wireless adapter cards to communicate with your wireless access point.

The UPnP refers to plug & play USB connection for transferring images to the computer.

The best way to avoid not having to turn off encryption is to transfer your photos by the camera cable or remove the memory card and insert it into a USB memory card reader and connect it to your computer.

Dec 08, 2008 | Linksys RangePlus WRT100 Wireless Router

1 Answer

Belkin N1 routers

First off you need to change the defaault IP of one of the routers so that you can access them both via the web based interface. The default is

Do you plan linking them via cable or wireless?

Jun 23, 2008 | Belkin Wireless-N Wireless Router with...

2 Answers

Belkin Wireless Router

1. you need to put the software belkin installation disc into the girls laptop not just the desktop.

2. you need to plug the modem back in

3. on the back of the router press the little button NOT THE RESET BUTTON MAKE SURE IT IS THE LOCK BUTTON it will ask you for a password on the laptop

May 24, 2008 | Belkin Wireless G Plus MIMO (F5D9230-4)...

1 Answer

Problems in connecting to my blc30a through the website

Are you trying to access the camera in the local network? Have you assigned a static ip address to the camera? Which router are we using?

Feb 27, 2007 | Panasonic BL-C30A Network Camera

Not finding what you are looking for?
Panasonic BL-C30A Network Camera Logo

354 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Computers & Internet Experts

Oloyede Monsuru

Level 3 Expert

1417 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

micky dee

Level 3 Expert

2970 Answers

Are you a Panasonic Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides