Question about Maytag MER6772 Gemini Electric Kitchen Range

1 Answer

F 1-4 Error Code

What does the F 1-4 error code mean?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 473 Answers
Re: F 1-4 Error Code

F1 is usually bad oven control board. Look for a tech sheet on the back of the oven. This will tell what all of the codes mean and what to check for.

Posted on Oct 06, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

What dose F3 code mean

Amana Appliance Fault Codes - PartSelect
Fault codes for Amana ovens, range, stoves including dual convection wall overs and 'big ovens'. ... F3-1 - Oven Temperature Sensor/Circuit Failure - Check wire connections and ... what does it mean when the oven turns off and f3 shows ... My Amanaagds902ww gas range flashes "Door" when attempting to light the oven.

Amana Gas oven Fault Code F3 - Appliance Repair Forum

Nov 17, 2010 - 2 posts - ‎1 author
Have a Fault Code F3 display on oven when trying to set oven ON. Researched ... Yes, your F3 code would indicate a sensor circuit problem, Jenn-Air Electric Range Code F3
4 posts
Mar 15, 2011
Range keeps giving error codes E0/F3 and E4/F3 and the ...
5 posts
Nov 22, 2010
Replaced Sensor Still Getting F3 Error
4 posts
Sep 20, 2008
F3 Error code on whirlpool Range
4 posts
Sep 10, 2007
More results from

Amana Fault Codes - Appliance Help O

Dec 25, 2015 | Amana Kitchen Ranges

1 Answer

Trying to clean oven. FSE 1 shows up on the display. What is it telling me?

What does the code F5E1 on a Whirlpool model ... > Manage My Life > Questions
The error F5E1 indicates the over door latch is not operating. ... If the door latches and the code displays then it is most likely the control but if it does not latch at all then the latch mechanism is most likely bad. ... What does the error code E2 F3 mean on a Whirlpool Gold range?

I get an FSE 1 Error Code when trying to use self cleaning

Nov 26, 2015 | Kitchen Ranges

1 Answer

Code f10 and f29 came up while On self cleaning what does this mean ?

Washer Error Codes Below is a list of... - Elite Appliance ...
Right now you will find error codes for Asko, Fisher & Paykel, Frigidaire, GE, Kenmore, LG, Maytag, Samsung, ... Check pump trap and clean. ... Musical series of beeps every 5 seconds and Wash cycle light flashing-Washer is overloaded. ... E47--Board thinks the door PTC circuit is open in spin .... F29--Door unlock error

Range Error Code F10: Troubleshooting Runaway Oven ...

? 2:20
Oct 1, 2015 - Uploaded by searspartsdirect
If you see F10 on your range, it means that your electroni. ... exceeds the temperature you set it at in either .

Nov 07, 2015 | Electrolux E30EW85EPS Electric Kitchen...

2 Answers

Error code F3 E5 when using self clean cycle

Error Code F3 - E5 - Oven temperature sensor (RTD) shorted (lower oven, if double oven)

Replace Oven temperature sensor (RTD) or Thermal Fuse.

Hope this helps.

Oct 08, 2011 | KitchenAid Kitchen Ranges

2 Answers

What does F13 Error mean?


Here is what the F-13 error code means and the fix for it.

F13 Internal CPU checksum errors 1. Disconnect power for 1 minute.
2. Reconnect power.
3. If failure remains, replace the touch control module

So it says the main computer control had detected a error in the touchpad control

I hope this helps,


Aug 01, 2011 | Kitchen Ranges

1 Answer

Error code on keypad EE L before screen went out. What does it mean.


Error code EE means temperature sensor issue. This error appears when the oven temperature turns bad or when a high temperature is detected by the sensor. Try and unplug the range for 1-2 hours and check if this clears the error. Hope this helps... Please post back if you need more information.


Apr 10, 2011 | Sharp Insight KB3425LK KB3425LW Electric...

1 Answer

Westinghouse LT819S 1F error and beep.

hello there
This is a verry common issue with these ovens
Here is the meaning and a few things to determine what is at fault i have it listed below
this error code can actually show up as any 1 of these and they all mean the same thing
F0 -
F1 - F7 Stuck keypad
may mean relay is turned on.or has
Determine if problem is with the Key Panel or Control by:
1. Pushing CLEAR/OFF pad.
2. Disconnecting Ribbon Cable from control and waiting at least 32 seconds to see if Code recurs

If code recurs, problem is in the control. Replace control.

If code does not recur, problem is with the Key Panel.

Jan 21, 2011 | Kitchen Ranges

1 Answer

My oven is showing an F1-E1 error code. What does this mean

F1 - E1 EEPROM checksum error 1. Disconnect power for at least 30 seconds.
2. Re-apply power and observe for at least one minute.
3. If code re-appears, replace control board (also called ERC or clock).

Note: Applies to all F1-E... codes except F1-E3.

Oct 25, 2010 | Whirlpool Accubake RF362LXTT Electric...

1 Answer

F2 error code on GE built in Oven Model JKP13GOP

Your error code means this. F2 For an unknown reason, the oven temperature has exceeded a preset threshold.

Good Lock and Please Rate FixYa!

Dec 27, 2008 | GE JBP90 Electric Kitchen Range

Not finding what you are looking for?
Maytag MER6772 Gemini Electric Kitchen Range Logo

Related Topics:

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Kitchen Ranges Experts


Level 2 Expert

283 Answers


Level 3 Expert

2963 Answers


Level 2 Expert

236 Answers

Are you a Maytag Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides